What should be the design capacity of the distribution pipes

Assignment Help Civil Engineering
Reference no: EM13308433

A water supply system is being designed to serve a population of 200,000 people with an average per-capita demand of 600L/Person-day (peak demand factor is 1.8) and a needed fire flow of 28,000 L/min. If the water suply is dran from a river, what should be the design capacity of the supply pumps and the water-treatment plant? For what duration must the fire flow be sustained and what volume of water must be kept in the service reservoir to accomodate a fire? What should be the design capacity of the distribution pipes?

Reference no: EM13308433

Questions Cloud

Find dry unit weight-void ratio and degree of saturation : A soil specimen has a water content of 18% and a wet until weight of 118.5 lb/ft. The specific gravity of solids is found to be 2.72. Find the dry unit weight, void ratio, and degree of saturation.
Explain the format of the processor''s logical address : What is the format of the processor's logical address. What is the length and width of the page table (disregarding the "access rights" bits)
Estimate the pressure 200m downstream of the treatment plant : water from a treatment plant is pumped into distribution system at a rate of 4.38 m^3/sec, a pressure of 480 kpa and a temperature of 20 degree celcius. The pipe has a diameter of 750 mm and is made of ductile iron
Please make a positioning map for kraft yuban coffee : Please make a Positioning map for (Kraft) Yuban coffee without using price or quality as attributes. The competitors are JM Smucker, Nestle, Starbucks, Green Mountain and Sara Lee.
What should be the design capacity of the distribution pipes : A water supply system is being designed to serve a population of 200,000 people with an average per-capita demand of 600L/Person-day (peak demand factor is 1.8) and a needed fire flow of 28,000 L/min.
Determine what is the concentration in lake water with ph : What is the concentration (M) of Al3+ in lake water with pH = 4 assuming the equilibrium below with excess Al(OH)3 (s) The reaction is Al(OH)3 (s) --> Al3+ + 3OH-. pKsp = 32.9.
What is the use of win32 console functions : What is the use of Win32 Console functions and how they relate and pertain to GUI.
Describe the company and the product safety issue : Describe the company and the product safety issue that led to the lawsuit.
Generate a histogram for all the grades : Generate a histogram for all the grades. Each score represents one dot on the histogram.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine diameter of glass tubing for the capillary rise

Determine the diameter of glass tubing that is necessary for the capillary rise to be less than 0.5 mm. Assume the fluid is water with surface tension equal to 0.0728 N/m and specific weight equal to 9800 N/m3

  What is the steady-state concentration

If both tanks are well-mixed and remain at constant volume, what is the steady-state concentration (in mg/L) of chromate (CrO42-) in the effluent water leaving the second tank?

  Determine the number of revolutions exected by gear a

A load is to be raised 20 ft by the hoisting system. Assuming Gear A is initially at rest, accelerates uniformly to a speed of 120 rpm , determine (a) the number of revolutions exected by gear A in raising the load. (b) The time required to raise ..

  Determine what is the total force on the roof at collapse

a storage tank has a diameter of 80 ft, a height of 25ft and contains oil to a height of 15ft. the suction pumps, which can handle 15000bbl/d, are started, but the safety valves are clogged and a vacuum is drawn in the tank.

  Which pipe would be suggested to the axis chemical company

Axis Chemical Company needs you to design a gravity sewer to convey 1,750 GPM of toxic waste. The pipe is to be glass-lined reinforced concrete (n = 0.009). Which pipe would you suggest the Joker use

  Define soda ash and quicklime

Soda Ash and QuickLime, A lime-soda softening plant treats a flow of 150 MGD, and the water has 86mg/l Ca2+, 35 mg/L Mg2+, 299 mg/L HCO3- and 6mg/l CO2.

  Compute the normal flow rate through the channel

A large drainage channel has a trapezoidal cross section with a bottom width of 75 feet and bank side slopes of 4:1 (H:V). If the normal depth of flow is 25 feet, compute the normal flow rate through the channel (Q in cfs).

  Find summer values for oxygen demand and oxygen tranfer

A fine-bubble aeration basin has a flow of 21.5 mgd, an influent BOD of 180 mg/l, 31 mg/l of mmonia, and effluent of 10 mg/l. During the winter, the wastewater temperature of 14.8 degrees C does not nitrify.

  Determne the diameter of the tube at a uniform rate

A 25 mm diameter steel cylinder falls under its own weight at a uniform rate of 0.1 m/s inside a tube of slightly larger diameter. Castor oil of viscosity 0.25 N.s/m2 fills the spacing between the tube and the cylinder.

  What is the percent yield

Carbon disulfide (CS2) reacts with excess chlorine (Cl2) to produce carbon tetrachloride (CCl4) and disulfur dichloride (S2Cl2). If 69.7 g of CS2 yields 62.6 g of CCl4, what is the percent yield? (Hint, you must first write the balanced equation.)

  Estimate the theoretical production of landfill gas

estimate the theoretical production of landfill gas (CH4 only) from the degradation of 20.3 kg of rapidly decomposable MSW. asssume the density of methane is 0.7177 kg/m^3.

  Estimate low-dose cancer risk from occupational inhalation

this concentration is based on an assumption that the individual is generally healthy and is exposed for 8 hours per day over a working lifetime ( that is from age 18 to 65 years). assuming a body weight of 78 kg and an inhalation rate of 0.63 m^3..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd