What length l of splice plate is needed

Assignment Help Civil Engineering
Reference no: EM13210544

two strips of a plastics material are bonded together as shown. The average shearing stress in the glue must be limited to 1000 kpa. what length L of splice plate is needed if the axial load carried by the joint is 55 kN and the width (W) is 315 mm?

Reference no: EM13210544

Questions Cloud

Harvey wasserman-the robber barons : Write paper on article: American Perspectives - Harvey Wasserman, “The Robber Barons”
What is the astronomic azimuth of the line : The magnetic north azimuth of a line is 128 degrees 27' while the magnetic declination is 3 degrees 30'E. What is the astronomic azimuth of the line (in decimal degrees)?
What is the length of the partial wavelength : What is the length of the partial wavelength for electromagnetic energy with a frequency of 15 MHz and a phase shift of 263 degrees (in meters)?
Use the bernoulli equation : Use the Bernoulli equation to describe how this manometer can be used to measure the flow rate through the meter.
What length l of splice plate is needed : two strips of a plastics material are bonded together as shown. The average shearing stress in the glue must be limited to 1000 kpa. what length L of splice plate is needed if the axial load carried by the joint is 55 kN and the width (W) is 315 m..
Determine the quality of the initial state : A two-phase liquid-vapor mixture of water is initially at a pressure of 10 bars. If on heating at fixed volume, the critical point is attained, determine the quality of the initial state.
Project to develop themselves professionally : Learning how to get a high performing team will require a lot of effort by the project manager. As a Project Manager, how would you balance your efforts to get the project done with your efforts to help team members use their work on the project to d..
Risks can occur any time in the project life cycle : We all know that there will be risks can occur any time in the project life cycle.
Metternich claimed after napoleans defeat : Metternich claimed after napoleans defeat that

Reviews

Write a Review

Civil Engineering Questions & Answers

  Calculating the relative compaction of a dam project

A dam project specifies 97% compaction. Lab tests on the soil being used indicate that it has a maximum dry density of 1900 kg/m 3 at an optimum water content of 13.2%.

  Use activity coefficients estimated from ionic strength

The total dissolved inorganic carbon (TIC) of a sample of groundwater is 8.33 mM. The temperature of the aquifer is 15C, the pH is 7.5, and the ionic strength is 0.05 M. What is the H2CO3, HCO3-, CO3 2-, and the partial pressure of CO2? [Use activ..

  Minimizing the tension tab

What should TAC , TAB and the acute angle ? between TAB and the vertical to minimize the tension TAB ? Take o and W = 1,000 N. Hint: Consider various possible force triangles and decide on inspection how to minimize TAB.

  Determining the pumping rate

Determine the required pumping rate. the aquifer has T= 1600 m 2 /day and the wells each have radius of influence of 600m.

  Problem regarding helium balloons

To float a 160 pound man using helium balloons (assume 0.52 cubic feet per inflated balloon). How many balloons would it take? Assume density of air is 1.29 kg/cubic meter and the density of helium is 0.179 kg/cubic meter.

  Designing ramp for the highest horizontal curve

the maximum degree of curvature can be at most 6.0 and the superelevation can be at most +6.0%. Design the ramp for the highest horizontal curve design speed given the constraints.

  Cstr reactors of equal volume in series

Compare the total reactor volume required for 90% removal of the same pollutant in a CSTR system that contains a single reactor against a system that contains three CSTR reactors of equal volume in series.

  Explain indicated concentrations of total volatile solids

Influent sample collected from a wastewater treatment plant was analyzed for various solids concentrations. Results indicated concentrations of Total Volatile Solids (TVS)

  Darcy-weisbach equation for flow in a pressure conduit

In using the Darcy-Weisbach equation for flow in a pressure conduit, what percentage error is introduced in Q when f is misjudged by 20 percent?

  Define the term coefficient of permeability

How would you define the coefficient of permeability? Give typical values of the coefficient for: a) fresh cement pastes; b) hardened cement pastes; c) commonly used aggregates;

  Width of the second floor-cross section of a cottage

A cross section of a cottage, 20 ft wide, is an isosceles triangle. If the slope of a side is 1.75 and there is a second floor 8 ft above the ground floor, what isthe width of the second floor?

  Determination of edta titration

Does the presence of Mg2+ significantly interfere with the determination of Ca 2+ by the EDTA titration?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd