Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
Link BC is 6 mm thick, has a width w= 25 mm, and is made of a steel with a 480 MPa ultimate strength in tension. What is the safety factor used if the structure was designed to support a 16 kN load P?
estimate the concentration and the mass emission rate of NOx if a coal containing 1.5% nitrogen is combusted at 1400 k using an air/fuel ratio that is 1.5 times the stoichiometric ratio.
Compare the reactor volume required to achieve 95% efficiency for Completely Mixed Flow Reactor (CMFR) and a Plug Flow Reactor (PFR) for the following conditions. steady-state, first-order reaction, flow rate = 14m3 / day.
During a 108 minute long storm, the precipitation rate over a 100 acre area is 1.65 in/hr. The phi index is 0.42 in/hr. The average outflow from the area is 92 cfs during the storm. What is the value of combined detention and interception storages ..
A 1.20-m thick strata of sand has a void ratio of 1.81. A contractor passes a vibratory roller over this extra strata, which densifies it and reduces its void ratio to 1.23. Compute its new thickness.
A round steel rod 25 mm in diameter, is subjected to a bending moment of 160 N.m. Calculate the maximum bending stress.
A concrete mix with a 3in slump, w/c ratio of .5, and sand with a fineness modulus of 2.4 contains 1700lb/yd3 of coarse aggregate. Compute the required weight of coarse aggregate per cubic yard.
A construction firm purchased 3 tractors from a certain company. At the end of the fifth year, let E1, E2, E3 denote, respectively, the events that tractors no. 1, 2, and 3 are still in good operational condition.
Determine the components of displacement at 1. Take E = 200 GPa, I = 250(10^6) mm^4, A = 12(10^3) mm^2 for each member.
The bottom bar is made up of an aluminum bar and a steel bar, each 10 in. long placed in the parallel configuration at 70 F. That is also heated to 300 F.
An aluminum link is subjected to axial tension. The loading is limited by the conditions of not yielding and not elongating excessively. The yield limit is satisfied if the stress remains below 50%of the 325M Payield stress.
A flexure test is done to determine the modulus of rupture of wood. Given that a=15in, L=34in, and the maximum load P that was applied was 5950lbf, what is the modulus of rupture of wood
The channel has side slopes of 4H:1V and a longitudinal slope of 0.5%. Assume a depth of flow of 6-inches. The parking lot slopes at 1% toward the channel from both sides, and the 2-year, 24-hour rainfall is 2in.
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd