Determine what is the mass of the silver

Assignment Help Civil Engineering
Reference no: EM13320697

A Kennedy half dollar has a mass of 1.150 X 10-2 Kg. The coins is a mixture of silver and cooper, and in water weights 0.1011 N. What is the mass of the silver?

Reference no: EM13320697

Questions Cloud

Calculate the carbon content required at surface of steel : A 0.02wt% C steel is to be carburized at 1200°C in 4 hrs with a point 0.6mm beneath the surface reaching 0.45wt%C. calculate the carbon content required at the surface of the steel.
Calculate the wavelength of the laser light : A laser beam is incident on two slits 0.100 mm apart and a screen is placed 4 m from the slits. what is the wavelength of the laser light
Calculate the focal length of this lens : A glass lens has a convex surface with radius 25.0 cm and a concave surface with a radius of 50.0 cm. Calculate the focal length of this lens
Calculate the average power produced by this force : A 600 gram particle (initially at rest at the origin) is subjected to a force of F=15i+20j (N), calculate the average power produced by this force
Determine what is the mass of the silver : A Kennedy half dollar has a mass of 1.150 X 10-2 Kg. The coins is a mixture of silver and cooper, and in water weights 0.1011 N. What is the mass of the silver
What is the rate of removal of thermal energy in watts : A copper cup of mass 0.300 kg contains 1.00 kg of water at 315 K. It is cooled so that the temperature decreases by 2.50 K each minute. What is the rate of removal of thermal energy in watts
What is the safety factor used if the structure was designed : Link BC is 6 mm thick, has a width w= 25 mm, and is made of a steel with a 480 MPa ultimate strength in tension. What is the safety factor used if the structure was designed to support a 16 kN load P
Determine is the final image real or virtual : Two converging lenses with focal lengths of f1 = 2.00 cm and f2 = 5.00 cm are situated 14.0 cm apart on a long optics bench. determine Is the final image real or virtual
What reduction below atmospheric pressure must be achieved : water at 150 degrees in a beaker is placed in an airtight chamber. Air is gradually pumped out of the container. What reduction below atmospheric pressure of 14.7 psi must be achieved before water boils

Reviews

Write a Review

 

Civil Engineering Questions & Answers

  Determine the final temperature of the water

A piston-cylinder device contains 0.2kg of water initially at 800 kPa and 0.06m^3. Now 200 kJ of heat is transferred to the water while its pressure is held constant. Determine the final temperature of the water.

  Explain qualitative difference between the sine and tangent

Determine the percent error n in replacing the sine and the tangent of an angle by the value of the angle in radians for angle values 5 degrees, 10 degrees, and 20 degrees. Explain the qualitative difference between the sine and tangent results.

  Determine value of force f which result in zero displacement

A rectangular steel bar shown is fixed at the right end has a thickness of 20 mm. The temperature is increased by 20C and a force F is applied as shown midway along the bar. Use the properties E=200 GPa, a=12(10^-6)/C.

  Determine the friction and the head loss with linear length

A 8 inch polyethylene pipe has a flow rate of 1000 gallons/minute with a linear length of 10000ft. Starting at elevation 200ft then ends at 600ft elevation. Initial pressure is 40 psi. find the friction and the head loss.

  Determine what type of surface would wheeler tractor be

A wheeled tractor with high-pressure tires and weighing 74,946 lb is pulled up a 5% slope at uniform speed. If the tension in the tow cable is 13,000 lb, what is the rolling resistance of the road

  Calculate the unit weight and dry unit weight of the soil

A cube of moist soil weighs 330 lb and has a volume of 3.00 ft3. Its moisture content is 27.0% and the specific gravity of solids is 2.72. Compute the void ratio, porosity, degree of saturation, unit weight and dry unit weight of this soil.

  At what depth will water flow in a 10 m wide channel

At what depth will water flow in a 10 m wide rectangular channel, if n=0.01, S=0.0015 and Q=9m^3/s

  Water system design

Determine the corresponding error in the computed discharge

  Determine for each case the ration of total energy available

At all other times, the wind velocity is zero. Determine for each case the ration of the total energy available from the wind to the total wind energy available at the mean velocity operating continuously

  Calculate critical depth and minimum specific energy

A rectangular channel of 20 f t width and having n = 0:017 carries flow of 800 f t^3/s. Calculate (a) critical depth (b) the minimum speci c energy (c) the speci c energy when depth of flow is 7 f t.

  Discuss about damp-proofing trenches

Discuss about damp-proofing trenches

  Determine what effect would water have on the foundation

A water pipe, in diameter id located in a trench 450mm below the center of the slab. The trench running along the length of the slab,300mm wide and 450mm deep, was backfilled with the same soil. If this pipe were to leak, what effect would it have..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd