What is the effective vertical stress 12m below the water

Assignment Help Civil Engineering
Reference no: EM13560250

A river is 6m deep. The riverbed material has a saturated unit weight of 19.5kN/m3. What is the effective vertical stress 12m below the water surface?

Assume the water is static and assume a datum at the water surface.

A) what is the total head 5.0m below the river bed?

B) What is the pore water pressure at that level?

Reference no: EM13560250

Questions Cloud

Apply the three internal analysis frameworks-swot analysis : Apply the three internal analysis frameworks-SWOT analysis
What is the undrained shear strength of the clat in kpa : A saturated clay deposit is vane-tested in-situ. A torque of 30Nm is required to shear the clat. The vane is 40mm wide by 100mm long.What is the undrained shear strength of the clat in kPa?
A rope-jumping rhyme : Who is "The Chorus Line: A Rope-Jumping Rhyme" addressed to? How is this chorus connected to Atwood's theme?
Is imc campaign centred : Is IMC campaign centred
What is the effective vertical stress 12m below the water : A river is 6m deep. The riverbed material has a saturated unit weight of 19.5kN/m3. What is the effective vertical stress 12m below the water surface?
Draw to scale the streakline path-line of the particle : For a given hypothetical flow, the velocity from time t=0 to t=5 seconds was u=2 m/s , v=0. Then, from time t=5 s to t=10 s, the velocity was u=+3 m/s, v=-4 m/s. A dye streak was started at a point in the flow field at time t=0
What kinds of behaviors exhibited by elementary-age : What kinds of behaviors exhibited by elementary-age students can be indicators that they are dealing with literacy challenges?
Determine the maximum temperature the component : A component that is made of S-590 alloy is to be subjected to a static stress of 400 MPa at a high temperature. Using a safety factor of two based on the stress, determine the maximum temperature the component must be exposed to for it to sustain the..
What are the five different marketing management orientation : What are the five different marketing management orientations.? Which orientation do you believe Apple follows when marketing products such as the iPhone and iPad?

Reviews

Write a Review

Civil Engineering Questions & Answers

  Calculate the height of the capillary rise in the tube

A clean glass capillary tube having a diameter of .008 in. was inserted into water with a surface tension of 0.00504 lb/ft. Calculate the height of the capillary rise in the tube.

  Calculate the hi and the elevation of point x

If a plus sight of 12.03 ft is taken on BM A, elevation 312.547 ft, and a minus sight of 5.43 ft is read on point X, calculate the HI and the elevation of point X.

  Determine the minimum elevation difference across

The pressurized tank shown was fabricated by welding strips of plate along a helix forming an angle ? (beta) with a transverse plane as indicated below. Determine the largest value of

  What is the minimum perimeter of that the blade must have

A rectangular blade weighing 0.02 lbf is kept in the surface of water (sigma=0.073 N/m) solely by surface tension forces. What is the minimum perimeter of that the blade must have so that this is possible

  Find the mass of the vehicle and the stiffness and damping

An automobile modeled as a single-degree-of-freedom system free to vibrate in the vertical direction. In a free vibration test the amplitude of oscillation is observed to decrease from 20mm to 2 mm in one cycle which takes 3 seconds.

  Determine what will the wires resistance be of the wire

A wire has a resistance of 1.2×10-2 . What will the wire's resistance be if it is stretched to twice its original length without changing the volume of the wire

  Compare the physical migration of workers

Compare the physical migration of workers during U.S. industrialization and present-day intellectual transition into a new type of workforce.

  Calculate the true volumetric flow rate of methane in the

A previously calibrated rotometer is being used to measure a gas flow. The old calibration curve is a straight line described by the following equation:

  Determine magnitude of its velocity after the car has travel

A car travels along a circular path such that its speed is increased by a_t=0.5e^t(m/s^2) ,where t is in seconds. The radius of curvature of the path is 30m. Determine the magnitude of its velocity after the car has traveled s = 18m starting from r..

  Find out the number of turns in each spring

Find out the number of turns in each spring, if the diameter of the spring wire 14 mm and the diameter of coil is 80 mm. Assume C=84 GN/mmxmm.

  Estimate the runoff from the watershed into the lake

A 5 km2 lake does not have a defined input but receives runoff from its watershed (25 km2). The area receives 60 cm/yr in precipitation. Evaporation from the lake surface is 10 cm/yr with watershed evapotranspiration of 20 cm/yr.

  Determine the horizontal and vertical components of reaction

The winch consists of a drum radius 4 in., which is pin connected at its center C. At its outer rim is a ratchet gear having a mean radius of 6 in. The pawl AB serves as a two-force member (short link) and keeps the drum from rotating.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd