What is the delfection due to self weight at the end of the

Assignment Help Civil Engineering
Reference no: EM13561649

A 13 foot long C10x25 beam is supported as a cantilever beam where x=0 on the left end. It is subject to no externally applied loads.

a) What is the delfection due to self weight at the end of the beam?  show steps

b) What is the deflection due to self weight in the middle of the beam?

Reference no: EM13561649

Questions Cloud

Shoot supplies from ground so that they reach top of plane : You are trying to shoot supplies from the ground so that they reach the top of a plane while flying low. The plane is flying at an altitude of y=20 meters high and with a speed of 30m/s, and you want to project your medical supplies with an initia..
Dipole is perpendicular to the electric field : A dipole of moment 0.7 e · nm is placed in a uniform electric field with a magnitude of 70000 N/C.What is the magnitude of the torque on the dipole when the dipole is perpendicular to the electric field?
Floor is connected to horizontal spring of force constant k : A box of mass m on the floor is connected to a horizontal spring of force constant k. The coefficient of kinetic friction between the box and the floor is µk. The other end of the spring is connected to a wall.
What is the deflection at the end of the beam : A C10x20 catilever beam is 12 feet long, supported on the right side. The beam supports two point loads: Load 1 is 2500 lbf and is located 2.5 feet from the wall. Load 2 is 1300 lbf and is located 12 feet from the wall.
What is the delfection due to self weight at the end of the : A 13 foot long C10x25 beam is supported as a cantilever beam where x=0 on the left end. It is subject to no externally applied loads.
How does the engineering classification of soils differ from : A sample of undisturbed soil has a dry weight of 10 lb and volumen of 1 ft^3. If the specific gravity of the soil solids is 2.65, determine the void ratio and the porosity.
What is the crest length of the model in feet : The length of time the model must be operated to check the equivalent of 36 hours of operation for the prototype operation, in decimal format hours.
What is the braking efficiency : A car is traveling up a 3% grade on a road that has good, wet pavement. The engine is running at 2500 rpm. The radius of the wheels is 15 inches, the driveline slipage is 3% and the overall gear reduction ratio is 2.5 to 1
What will be the impact on fish population in the stream : Below a discharge from a wasterwater treament plant , an 8.6km stream has a reoxygenation constant of .4 d^-1, a velocity of .15m/s, a dissolved oxygen concentration of 6mg/L, and an ultimate demand of 25mg/L.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Find the force exerted by the jet on the vane

A pipeline terminates in a nozzle of outlet diameter = 0.15 m. The free jet from the nozzle is deflected through 120º by a vane as shown. Water flow rate through this pipe is 0.25 m3/s. Ignoring friction, find the force exerted by the jet on ..

  Make necessary calculations to select the pit from

A proposed embankment fill requires 8000 cubic meters of compacted soil. The void ratio of the compacted fill is specified as 0.7. Four borrow pits are available along with each of the respective void ratios along with the cost per cubic meter for mo..

  Which option has the lowest overall cost

Two remediation options are being considered for a contaminated land area formerly used for industrial operations. Option 1 involves removing all of the contaminated soil over a two-year period at a cost of 2.2$ million per year.

  Find the elevation of x

A telephone cable is clamped at A to the pole AB. Knowing that the tension in the right-hand portion of the cable is T2= 1000 lb. determine by trigonometry (a) the required tensoin T1 in the left hand portion if the R of the force exerted by the cabl..

  Determine the distance that the piston is displaced

a vertical 12-cm diameter piston-cylinder device contains an ideal gas at the ambient conditions of 1 bar and 24 degrees C. Initially, the inner face of the piston is 20 cmfrom the base of the cylinder.

  Prepare an outline of the experimental design

Prepare an outline of the experimental design you will suggest to the plant manager. This outline should contain research rationale, aims and objectives, research methodology, nature of data analysis and interpretation, and possible outcomes/concl..

  Calculate the factor of safety and deformation

A 1 cm diameter, 0.4 m long steel rod is to be used in an application where it will be subjected to an axial tensile force of 15kN. The factor of safety based on yield stress must be at least 1.5, and the axial deformation must not exceed 2 cm.

  Determine the tension in cables ac and ab

The casting has a mass of 3Mg. Suspended in a vertical position and initially at rest, it ia given an upward speed of 200mm/s in o.s^s using a crane hook H. Determine the tension in cables AC and AB during this time interval if acceleration is con..

  Determine the minimum size of the pad footing 2 meters wide

A geotechnical report has suggested an allowable bearing pressure of 200kPa. Determine the minimum size of the pad footing 2 metres wide for a steel column if a factor of safety of 2.0 is recommended

  Define need before function

Which of the following is not a basic systems engineering concept?a. Define need before function

  Find range of values for probability of succeful takeovers

The current price of a company stock is $20.The company is a takeover target.If the takeover is successful.the company's stock price will increase to $30.If the takeover is unsuccessful.the stock price will drop to $12.

  What are the pressure and enthalpy values for the point

Setam with a quality of 95% is present at 200 degrees F. What are the pressure and enthalpy values for this point

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd