What does line of collimation means

Assignment Help Civil Engineering
Reference no: EM13210907

How to detect eror in line of collimation and what does line of collimation means.

Reference no: EM13210907

Questions Cloud

Determine appropriate insurance coverage : Explain risk management and its importance and identify types of risk and how you can manage and determine appropriate insurance coverage by investigating options for property and vehicle.
Define substances would be expected to be the most soluble : Which of the following substances would be expected to be the most soluble in CCl4? Answer with explanation as to why. a)NH3
Estimate the hourly so2 and particle emissions : what type of SO2 removal device before (in front of) or after (following) the particle collector would you use?
How far downstream would you establish barricades : The fire department proposes to approach the truck from the upstream side and heavily spray the truck with water to prevent an explosion. Will this help to reduce the chlorine concentration downstream?
What does line of collimation means : How to detect eror in line of collimation and what does line of collimation means.
Cost of ordinary share capital : Calculate the weighted average cost of capital of Riphean plc and Silurian plc using the information provided and discuss two possible reasons why the cost of ordinary share capital differs between the two businesses
Explain the change in total pressure within the chamber : What is the change in total pressure within the chamber following the reaction? Assume a constant temperature throughout the process.
Calculate the maximum bending stress : a round steel rod, 25 mm in diameter, subjected to a bending moment of 160 Nxm. calculate the maximum bending stress.
Influence on motivation than learned factors : Discuss whether or not innate factors have more of an influence on motivation than learned factors. Do you think that innate factors have more of an influence on motivation than learned factors?

Reviews

Write a Review

Civil Engineering Questions & Answers

  What are the factors affecting the hydraulic conductivity

what are the factors affecting the hydraulic conductivity?

  Municipal utility-considering two large-scale conduits

A big municipal utility district is considering two large-scale conduits. The first includes construction of a steel pipeline at a cost of $200 million.

  Overall gear reduction ratio

If the overall gear reduction ratio is 8 to 1, what is the maximum acceleration from rest (in ft/sec^2) for: a) the car with the base engine? b) car with the modified engine? Assume the car is on good dry pavement.

  Rectangular duct carries air

A 30mm pipe X 460 mm rectangular duct carries air. What size square conduit is needed to transport 4m cube per sec of water at a distance of 45m and head loss of of 1.08m.

  Calculating the relative compaction of a dam project

A dam project specifies 97% compaction. Lab tests on the soil being used indicate that it has a maximum dry density of 1900 kg/m 3 at an optimum water content of 13.2%.

  Number of revolutions tub makes

A tub of a washing machine is rotating at 50 rad/s when the power is turned off. If it takes 15s for the tub to come to rest, determine (a) the constant angular deceleration, and (b) the total number of revolutions the tub makes.

  Force required to maintain this motion

The viscosity of the film of oil separating the piston from the cylinder is 0.020 lb.s/ft. Calculate the force required to maintain this motion.

  Coefficient of static friction between pacakges

The belt starts from rest at time t=0 and its speed increases at a constant rate of 150mm/s^2. Knowing that the coefficient of static friction between the pacakges..

  Question in structure analysis

Determine axial force and Max bending - Question in structure analysis

  Vehicle delay due to queuing

Vehicles begin to arrive at a toll booth at 850 am with an arrival rate of x(t) = 4.1 + .01t (with t in min and x(t) in veh /min.) The toll booth opens at 9am and processes vehicles at a rate of 12 per minute throughout the day. Assuming D/D/1 que..

  Consolidated-drained triaxial shear test

A consolidated-drained triaxial shear test on a normally consolidated clay yielded a drained friction angle of 28 degrees. If the confining pressure during the test was 15 psi, what was the major principal stress at failure.

  Determine what angle of twist

a beryllium copper wire having diameter of 1-50 mm and length of 40mm is used as a small torsion bar in an instrument. determine what angle of twist would result in the wire when it is stressed to 250 mpa.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd