What are the normal stresses in the bars afterward

Assignment Help Civil Engineering
Reference no: EM13540133

Two aluminium bars (E = 70 GPa) are attached to regid support at the left and a cross-bar at the end. An iron bar (E = 200 GPa) is at attached to the rigid support at the left and there is a gap b = 0.6 mm between the right end of the iron bar and cross-bar.

The cross sectional area of each bar is A = 400 mm2 and L = 250 mm. If the cross bar is loaded with a load P = 250 kN, what are the normal stresses in the bars afterward?

Reference no: EM13540133

Questions Cloud

Computer the percent voids in total mix : An aggregate blend is composed of 53% coarse aggregate by weight (sp. gr. 2.702), 43% fine aggregate (sp. gr. 2.621), and 4% filler (sp. gr. 2.779)/ The compacted specimen contains 6% asphalt binder (sp. gr. 1.052) by weight of total mix, and has a b..
What are the normal stresses in the bars afterward : Two aluminium bars (E = 70 GPa) are attached to regid support at the left and a cross-bar at the end. An iron bar (E = 200 GPa) is at attached to the rigid support at the left and there is a gap b = 0.6 mm between the right end of the iron bar and cr..
If the bearing stress on the concrete pedestal must not : If the allowable stress in the cylinder is 55 MPa, what is the maximum internal diameter (nearest integer, such as 10, 11, 12, …., in units of millimetres) of the cylinder?
Describe how you analysed and defined a problem : Describe how you analysed and defined a problem and identified the engineering knowledge and skills required for solving the problem?
What are the normal stresses in the bars afterward : The cross sectional area of each bar is A = 400 mm2 and L = 250 mm. If the cross bar is loaded with a load P = 250 kN, what are the normal stresses in the bars afterward?
Compute the required weight of the aggregate per cubic yard : Concrete mix with a 3 in slump, w/c ratio of .5, and sand with a fineness modulus of 2.4 contains 1700 lb of coarse aggregate.
How does the string quartet differ from the symphony : The principal chamber ensemble of this era, however, was the string quartet. After this ensemble were the various string and piano groups. The piano trio, the piano quartet, and the piano quintet also became well-established genres.
What might be the reason that haydn’s operas are no longer : One of Haydn’s chief duties was to compose and produce operas for the prince. The twenty or so works he composed were quite popular in his time. The Austrian empress Maria-Theresa was quick to praise his works. Today, however, they are forgotten.
Why do you think people tolerated beethoven : Beethoven’s growing deafness caused him to consider suicide at one point. What kept him from acting on this impulse?

Reviews

Write a Review

Civil Engineering Questions & Answers

  Describe which one will be harder to remediate and why

if a source of groundwater gets contaminated with a DNAPL and another one gets contaminated with a LNAPL, which one will be harder to remediate and why

  Determine sequent depth and length of the hydraulic jump

A spillway carries a discharge of 22.5 m^3/s with the outlet velocity of 15 m/s at a depth of .2 m. Select an adequate USBR stilling basin and determine the sequent depth, the length of the hydraulic jump and the energy loss.

  What is the horizontal force excerted on the supports

A carbon steel tank, 6ft. inside diameter X 10 ft. long with a 3/8 inch wall, is sitting on evenly spaced rolls and 4 evenly spaced supports (2 on each side). What is the horizontal force excerted on the supports

  Determine speed at which student conducted her experiment

A student is trying to test the braking ability of her car determined that she needed 18.5 ft more to stop her car when driving downhill on a road segment of 5% grade than when driving downhill at the same speed along another segment of 3% grade.

  Determine if a simple supported w beam has the capacity

Determine if a simple supported W 12x26 (A36 steel) beam has the capacity to support loads that produce 50 kips of live-load shear and 20 kips of dead-load shera.

  Describe what reorder point should jill use and why

Cartridges cost $120 each and require 2 weeks to obtain from the vendor. Jill uses (Q,r) policy to control inventory of cartridges. You can assume that there are 50 working weeks in a year.

  Determine what fraction of the cyanide is in the cn-form

The sodium cyanide solution ([NaCN]-total = 0.01 M) is kept at pH 10.4. The pH is kept high to keep the cyanide in the CN- form. If CN protonates by the reverse of the HCN dissociation reaction,

  Determine the work input required using both s0 and pr data

Air enters a steady flow, adiabatic compressor at 17 °C and is compressed through a pressure ratio of 8.6: 1. Assuming the compressor to be internally reversible

  Determine the compound empirical and molecular formula

A Silane contains 90.31 % silicon and 9.69 % hydrogen by mass. The compound has a molar mass of 62 g/mol. Determine the compound's empirical and molecular formula.

  Could effectively remove water from there cycling paradigm

Could effectively remove water from therecycling paradigm; and 4) the likely effects of global warming andcooling on these dynamics.

  A three-span continuous h20 timber beam with three equal

a three-span continuous h20 timber beam with three equal spans of 1.3 mts supports a uniform load of 22.46 knm2nbspwith

  Aggregate in the wheelbarrow weight

You fill a 2-cubic foot wheelbarrow to the top with aggregate. if the specific gravity of the aggregate is 2.548 and 18% of the aggregate is void spaces, how much does the aggregate in the wheelbarrow weight?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd