What annual volume savings will wastewater achieve

Assignment Help Civil Engineering
Reference no: EM13307692

The Pomdeterra wastewater treatment plant produces thickened sludge that has a suspended solids concentration of 3.8%. They are investigating a filter press that will yield a solids concentration of 24%. If they now produce 33 m3/d of sludge, what annual volume savings will they achieve if they install the press?
Assume that the specific gravity of the sludge solids is 1.32.

Reference no: EM13307692

Questions Cloud

Discuss and explain web browser vulnerabilities : Discuss and explain Web browser vulnerabilities. Include at least two different Web browsers in your discussion.
How to hack the most common web browser : Discuss and explain how to hack the most common Web browser. Also include methods for securing Web browsers. Include at least two different Web browsers in your discussion.
Draw diagrams of unit operations necessary to treat wastes : Draw block diagrams of the unit operations necessary to treat the following wastes to effluent levels of BOD5 = 200 mg/L, SS = 100 mg/L, P = 5 mg / L (required for discharge into a sanitary sewer).
Strategic planning : Strategic planning
What annual volume savings will wastewater achieve : The Pomdeterra wastewater treatment plant produces thickened sludge that has a suspended solids concentration of 3.8%. They are investigating a filter press that will yield a solids concentration of 24%.
Determine the mass defect in atomic mass units : For lead 82Pb207 (atomic mass = 206.975880 u) obtain the mass defect in atomic mass units,
How value parameters useful in processing data in a program : Discuss some useful applications for n-dimensional arrays, such as graphical 3-D or biotechnology applications.
Find the integral in a table of integrals : Finding the integral in a table of integrals is not sufficient justification- for correctly and clearly demonstrating why.
Determine what volume of naocl will be needed : An electric power plant consumes 2.5 million gallons per day of cooling water. To control bacterial growth (slime), 2.0 mg/L of chlorine (measured as Cl2) is injected into the make-up water fed to the system.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the manning coefficient of channel roughness

A discharge of 2,200 ft^3/sec flows in a trapezoidal channel at a normal depth of 8.0 ft. The channel has a slope of 0.01, a 12-ft bottom width, and side slopes of 1:1 (H:V). Determine the manning coefficient of channel roughness

  Determne the minimum water rate in lbm per hour

An absorption column is to be designed to recover 99.5% of the NH3 from a feed stream, which is supplied at 72 F and an NH3 partial pressure of 10 mm Hg. The feed stream contains 2100 lbm/hr of air.

  Derive the pollutograph and the loadograph

The average P concentration in the runoff if the overall (agricultural and residential areas) runoff coefficient = 0.4, 40% of P is removed from the agricultural area by rainfall, and 90% of P is removed from the residential area by rainfall.

  Determine volume required for trickling filtration treatment

For a flow of 2 MGD, an influent BOD of 200 mg/l, a depth of 8 feet, and a desired effluent BOD concentration of 20 mg/l, determine the volume required for trickling filtration treatment as predicted for single-stage treatment by using NRC equatio..

  Required height of the roller coaster

Determine the required height h of the roller coaster so that when it is essentially at rest at the crest of the hill it will reach a speed v= 100km/hr when it comes to the bottom.

  Oxidization of ammonia during nitirification

what is the final dissolved oxygen concentration (in mg/L) in the waste lagoon after all of the ammonium (NH4 + ) is converted to nitrate? Recall that 4.57 mg of O 2 is need per mg of ammonium (as N) oxidized during nitirification. After all of the..

  Maximum deflection of the beam

Determine the deflection of the right end of the pointer and the maximum deflection of the beam.

  Net external forces acting upon a particle or rigid body

A condition where there are no net external forces acting upon a particle or rigid body and the body remains at rest. ... forces acting upon a particle or rigid body and the body remains at rest or continues at a constant velocity.

  Calculate average gas temperature in upper layre of room

A steady fire with an energy release rate of 500 kW occurs in a room 3m wide, 3m long, and 2.4 m high, with a door opening which is 1.8 m high and 0.6m wide. the ambient temperature is 20 degree celcius.

  Calculate how many lbs of co2 are produced per gallon

Diesel fuel has an average chemical formula of C12H23 and a density of 6.45 lb/gal. Calculate how many lbs of CO2 are produced per gallon of diesel burned (assume complete combustion).

  Is the flow laminar or turbulent and find reynolds number

For Oil (SG=0.86, u=0.025 Ns/m^2) flow of 0.3m^3/s through a round pipe with diameter of 500 mm, determine the Reynolds number. Is the flow laminar or turbulent

  Will all mixtures of the liquid and methane be single phase

A liquid of 80 mole percent propane and 20 mole percent n-pentane is to be diluted with methane. Will all mixtures of the liquid and methane be single phase at 160 F and 500 psia

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd