Sensitive pressure-measuring device

Assignment Help Chemical Engineering
Reference no: EM13884719

A Small reaction bomb fitted with a sensitive pressure-measuring device is flushed out andfilled with pure reactant A at 1atm. Pressure. The operation is carried out at 25oC,atemperature low enough that the reaction does not proceed to any appreciable extent. Thetemperature is then raised as rapidly as possible to 1000C and the following readings arerecorded. The stoichiometry of the reaction is 2A?B and after leaving the bomb in the bathover the weekend the contents are analyzed for A, none can be found. Find a rate equationwhich will satisfactorily fit the data;

Reference no: EM13884719

Questions Cloud

Is the goal to establish relative rank : In the article, Safavi (2006, p. 290) asks: "Is the goal to establish relative rank or absolute levels of performance?" Safavi also states that the basic dilemma in selecting a measurement system is whether "to judge performance from the outside or t..
System interoperability : For health care providers and organizations around the world, the achievement of system interoperability is an ever-present consideration and a constant challenge in their selection and implementation of health information technology solutions.
How does wolterstorff find joy after his loss : How does Wolterstorff find joy after his loss and What is the meaning and significance of death in light of the Christian narrative?
Discuss and describe if a company believed : Discuss and describe If a company believed that a nation was preparing to devalue its currency
Sensitive pressure-measuring device : A Small reaction bomb fitted with a sensitive pressure-measuring device is flushed out andfilled with pure reactant A at 1atm. Pressure. The operation is carried out at 25oC,atemperature low enough that the reaction does not proceed to any appreci..
User and prints the number of occurrences of each letter : File CountLetters.java contains a program that reads a word from the user and prints the number of occurrences of each letter in the word. In reviewing the code, note that the word is converted to all upper case first, then each letter is translated ..

Reviews

Write a Review

Chemical Engineering Questions & Answers

  Overall reaction in a commercial heat pack

The overall reaction in a commercial heat pack can be represented as: 4Fe(s)+  3O2(g) yields 2Fe2O3(s); delta H=1652 kJ a. How much heat is released when 4.00 mol iron is reacted with excess O2?

  Minute amount of radioactive americium

One type of commercial smoke detector contains a minute amount of radioactive americium-241 (241Am), which decays by -particle production.

  Corresponding number of actual plates

A continuous distillation unit, consisting of a perforated-tray column together with a partial reboiler and a total condenser, is to be designed to operate at atmospheric pressure to separate ethanol and water. The feed, which is introduced into t..

  Continuous filter is used to separate a clear filtrate

A continuous filter is used to separate a clear filtrate from alumina particles in a slurry. The slurry has 30% by weight of alumina (specific gravity of alumina = 4.5). The cake retains 5% by weight of water. For a feed stream of 1000 kg/hr, determi..

  Example of fluid dynamics

1) Give a common everyday example of fluid dynamics.

  Burning chlorine with hydrogen

Hydrogen chloride gas, produced by burning chlorine with hydrogen, is required at a supply pressure of 600 kN/m2, gauge. The pressure can be achieved by either operating the burner under pressure or by compressing the hydrogen chloride gas.

  Sensitivity analysis on the adipic acid project

Carry out a sensitivity analysis on the adipic acid project described in Example 9.5. Investigate the sensitivity of the 10-year NPV to variation in total fixed capital (-20% to +50%), annual gross profit (-20% to +30%), and project construction s..

  What are the four main stages of toxicokinetics

The effect of a hazardous substance depends on the concentration of the substance that is present in the body's systems. The concentration depends on the stages of toxicokinetics What are the four main stages of toxicokinetics

  Calculate the gross and net calorific values

Using the data given in Appendix C (available online at booksite .Elsevier.com/Towler), calculate the gross and net calorific values of the gas. Give your answer in MJ/m3, at standard temperature and pressure.

  Express the maximum radius and maximum thickness

Express the maximum radius (Rmax) and maximum thickness (Tmax) in terms of bulk oxygen concentration, Cb (mol/mL), diffusivity of oxygen through the device D (cm2/s) and maximum oxygen consumption rate, Vmax (mol/mL/s).

  Composition of the combined extract

Two equilibrium stages at 25C are used as shown in the following diagram. If 300 kg H2O/h is fed to each extraction unit, what fraction of the acetone in the feed solution would be removed and what would be the composition of the combined extract?

  Prepare the design and evaluation of a new chemical

prepare the design and evaluation of a new chemical manufacturing process.1 acetylation reactor2 separation of

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd