Refrigeration cycle operating

Assignment Help Mechanical Engineering
Reference no: EM13710269

A refrigeration cycle operating between two reservoirs receives energy QC from a cold reservoir at TC = 280 K and rejects energy QH to a hot reservoir TH = 330 K. For each of the following cases determine whether the cycle operates reversibly, irreversibly, or is impossible: (a) QC = 1500 kJ, QH = 2200 kJ, (b) QC = 1500 kJ, Wcycle = 120 kJ, (c) QH = 1600 kJ, Wcycle = 500 kJ, (d) Coefficient of performance (COP) = 6.

Reference no: EM13710269

Questions Cloud

Constant-volume process and pressure process : A piston-cylinder assembly contains 3 lb of water initially at 95 psi and 350 F. The water undergoes 2 processes in a series. First a constant pressure process and then a constant-volume process. At the end of the constant volume process the temperat..
Determine the change in kinetic energy : Steam flows steadily through an adiabatic turbine. The inlet conditions of the steam are 4MPa. 500 degree Celsius and 80m/s and the exit conditions are 30kPa, 92 percent quality and 50m/s. the mass flow rate of the steam is 12kg/s. determine the chan..
Two-dimensional steady-state heat conduction : Using Finite Difference and Finite Element to Solve for Two-Dimensional Steady-State Heat Conduction. Temperature distribution in the block (provide color contour diagrams) Temperature distribution along the top surface (present T vs x graphs)
Tubular body for high-pressure coolant and a carbide tip : What drill has one set of flutes that are ground to more than one diameter? What drill category includes more than one set of flutes allowing multiple diameters? What drill type incorporates a tubular body for high-pressure coolant and a carbide tip?
Refrigeration cycle operating : A refrigeration cycle operating between two reservoirs receives energy QC from a cold reservoir at TC = 280 K and rejects energy QH to a hot reservoir TH = 330 K. For each of the following cases determine whether the cycle operates reversibly, irreve..
Refrigerant enters the condenser of residential heat pump : Refrigerant-134a enters the condenser of a residential heat pump at 900 kPa and 40°C at a rate of 0.02 kg/s and leaves at 900 kPa as a saturated liquid. If the compressor consumes 1.2kW of power, determine (a) the COP of the heat pump and (b) the rat..
Find the polynomial by any suitable method : A fourth-order polynomial passes through the five points for which the independent and dependent variables, x and y, respectfully, are given (-2,37), (-1,7), (0,5),(1,13), and (2,61). Find the polynomial by any suitable method. Here, x represents the..
What is the controlling resistance for this heat transfer : A spherical container of outer diameter 2.5 m is buried below the wrath’s surface. The distance of the center of the container to the earth surface is 10 m. The container issued to temporarily store radioactive wastes where heat is generated at a rat..
Determine the rate of heat absorption from the outside air : Refrigerant-134a enters the condenser of a residential heat pump at 900 kPa and 40°C at a rate of 0.02 kg/s and leaves at 900 kPa as a saturated liquid. If the compressor consumes 1.2kW of power, determine (a) the COP of the heat pump and (b) the ra..

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  A cylindrical stone mix concrete beam of diameter d 045

a cylindrical stone mix concrete beam of diameter d 0.45 initially at ti 20c is exposed to hot gases at tinfinity

  Low level heat energy is exhausted continually to a large

low level heat energy is exhausted continually to a large body of water at the rate of 22mjhour. assuming the lake

  A gas turbine burns methane with 150 theoretical air

a gas turbine burns methane with 150 theoretical air. assume the air is 25 degrees celsius 100 kpa and has a relative

  During the process there is heat transfer to the steam with

5 kg of steam contained within a piston-cylinder assembly undergoes an expansion from state 1 where the specific

  Determine the mass flow rate of fuels in grams per second

determine the mass flow rate of fuels in grams per second from the gasoline tank to the cars fuel injection systems and

  Treating the system as a particle assuming that the contact

a railcar with an overall mass of 75000 kg traveling with a velocity vi is approaching a barrier equipped with a bumper

  Determine the mass flow rate of the air

Determine the mass flow rate of the air passing through this engine and the rates of heat addition and rejection when this engine produces 1000 hp. Assume constant specific heats at room temperature.

  A commercially available sump pump is capable of

a commercially available sump pump is capable of deliver-ing 2800 gallons per hour of water through a vertical lift of

  Determine the design thrust for a throat area

A rocket nozzle has a chamber pressure of 20 Bar (2 MPa) and a chamber temperature of 2750 K. The rocket is designed to operate isentropically at 12,500 m altitude. Note that the pressure at 12,500 m can be estimated using this equation P/P0 = exp [-..

  Create the speed-torque curve and torque-current curve

A particular motor has the following specifications: no load speed = 5000 rpm, stall torque = 200mN-m, no load current = 0.25 A, rated operating = 2500 rpm, 100mN-m, 5A. Create the speed-torque curve, torque-current curve, power-torque curve, and det..

  How much heat is rejected to the cooling system

steam with 88.6% quality and a flow rate of 750 kg/s enters a condenser operating @ 75 KPa. Saturated liquid leaves the condenser. How much heat is rejected to the cooling system.

  There are two pairs of saw horses or which untrimmed joists

during the construction of a house 6 joists of 24 feet each must be trimmed to the correct length of 23 feet. the

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd