Mixture of maleic anhydride and benzoic acid

Assignment Help Chemical Engineering
Reference no: EM13882126

A mixture of maleic anhydride and benzoic acid containing 10 mol% acid is a product of the manufacture of phthalic anhydride. The mixture is to be distilled continuously in a column with a total condenser and a partial reboiler at a pressure of 13.2 kPa (100 ton) with a reflux ratio of 1.2 times the minimum value to give a product of 99.5 mol% maleic anhydride and a bottoms of 0.5 mol% anhydride. Is this problem completely specified?

Reference no: EM13882126

Questions Cloud

Average total moisture content : A piece of hemlock wood measuring 15.15 x 14.8 x 0.75 cm is to be dried from the two large faces from an initial total moisture content of 90% to a final average total moisture content of lo%, with drying taking place in the falling-rate period wi..
Calculate break-even point both in total units : Calculate break-even point both in total units and total sales dollars
Determine bc ratio for a project that has a twenty year life : From the following estimates, determine the B/C ratio for a project that has a 20-year life. Use an interest rate of 8% per year.
Was ibm a volatile security in the time period under study : A security whose beta coef?cient is greater than one is said to be a volatile or aggressive security. Was IBM a volatile security in the time period under study?
Mixture of maleic anhydride and benzoic acid : A mixture of maleic anhydride and benzoic acid containing 10 mol% acid is a product of the manufacture of phthalic anhydride.
Financial intermediaries perform that benefit society : What are the economic functions that financial intermediaries perform that benefit society? In your answer, discuss the relationship of financial intermediaries and financial markets to the savings-investment process within an economy and to each oth..
Liquidity premium is required on any treasury security : Suppose the rate of return on a 10-year T-bond is 6.55%, the expected average rate of inflation over the next 10 years is 2.0%, the MRP on a 10-year T-bond is 0.9%, no MRP is required on a TIPS, and no liquidity premium is required on any Treasury se..
Distillation and membrane separation steps : A mixture of ethanol and benzene is separated in a network of distillation and membrane separation steps. In one intermediate step, a near-azeotropic liquid mixture of 8,000 kg/h of 23 wt% ethanol in benzene is fed to a pervaporation membrane cons..
Flexible budgeting case - activity versus spending variances : Fill in the activity variance and the spending variance amounts as well as indicate whether they are favorable or unfavorable for both size milk shakes.

Reviews

Write a Review

Chemical Engineering Questions & Answers

  Determine the flow rate and temperature of the water

Determine the relationship between flow rate and temperature of the water fed to the scrubber. Is the rate at which heat must be removed from the water as it is pumped 5. If all of the sulfur in the coal reacts to form H2S, determine the air requi..

  Mining and metallurgy - assignment metallurgy

Extract ore descriptors or features from the variables and design a model that can classify the ores correctly from images of the ore

  Combustion of ethane stack gas molar composition

Combustion of Ethane: Stack Gas Molar Composition, Ethane is burned with 50% excess air. The percentage conversion of ethane is 90%. Of the ethane burned, 25% reacts to form CO and the balance reacts to form carbon dioxide

  Compare this figure with the case of head and tail

A 2014 Toyota Prius has a drag coefficient of Cd at road speed, using A m2 as the reference area. Determine the horsepower required to overcome drag at a velocity of v m/s. Calculate the answer if Cd= 0.26; A= 2.33m2 and v=30 m/s. Compare this fig..

  Considering the laws of thermodynamics

Consider an inventor who claims to have invented a device which, upon activation, becomes colder when a liquid solution crystallizes spontaneously at constant pressure. Considering the laws of thermodynamics, should a government patent office deny hi..

  Operates at a low temperature of 25c

Consider an engine that operates at a low temperature of 25C and a higher temperature of 432C. Would it be possible to have an efficiency of 65% ?

  Where a and b are constants and r the interatomic

1. the potential energy between two atoms can be represented as

  1 when a thermocouple is moved from one medium to another

1 when a thermocouple is moved from one medium to another medium at a different temperature the thermocouple must be

  Baffled tank with a six blade turbine agitator

Equal rates of mass transfer for the production of the fine chemical are required. This is often required for certain types of organic synthesis.

  Select a process variable

Select a process variable (pressure / temperature / level / flow) and conduct a literature survey to determine recent developments in process instrumentation field. Identify any one novel instrument and explain in detail the working of the instrument..

  Calculate the mole fractions of the product

In the Deacon process for the manufacture of chlorine, HC1 and O2 react to form Cl2 and H20. Sufficient air (21 mole% 02, 79% N2) is fed to provide 35% excess oxygen and the fractional conversion of HCI is 85%.

  Open-system energy balance to calculate exit steam

Negligible heat is transferred from the nozzle to its surroundings. The approach velocity of the steam is negligible. The specific enthalpy of steam is 2974J/kg at 260°C and 7bar and 2860kJ/kg at 200°C and 4bar. Use the open-system energy balance ..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd