### How to calculate the increase in weight of the tank

Assignment Help Civil Engineering
##### Reference no: EM13302817

water flows into a weigh tank for 30 minutes. Calculate the increase in weight of the tank, if the discharge is 1.5 ft^3/s. The temperature is 50 F.

#### Questions Cloud

 Evaluate the integral correct to five decimal places : Use your calculator to evaluate the integral correct to five decimal places. What is interaction force in ferris wheel framework and seat : The pivot of each 120 kg seat on a Ferris wheel travels in a circle with a 10 m radius, and the Ferris wheelrotates witha rotational speed of 0.1 rad/sec. What is the interaction force between the ferris wheel framework and the seat H when angle Q.. What is the rate at which sound energy is produced : The sound level 23 m from a loudspeaker is 65 dB. What is the rate at which sound energy is produced by the loudspeaker Current or future life circumstances : Discuss how each of these principles can help you in your current or future life circumstances. How to calculate the increase in weight of the tank : water flows into a weigh tank for 30 minutes. Calculate the increase in weight of the tank, if the discharge is 1.5 ft^3/s. The temperature is 50 F. What is the range of the polarizing angle : some types of glass have a range of indices of refraction of about 1.4 to 1.7. What is the range of the polarizing angle What is the required return for jjm : Jersey Jewel Mining has a beta coefficient of 1.2. Currently the risk-free rate is 5 percent and the anticipated return on the market is 11 percent. JJM pays a \$4.50 dividend that is growing at 6 percent annually. Determine what is the void ratio and the specific gravity : For a same soil, two moist densities and their corresponding degrees of saturation are given in the following table Density (kg/m^3) S(%) 1700 55 1800 70 What is the void ratio (e) and the specific gravity (Gs)? What does stock cs negative growth rate imply : What is the maximum price that the investor should pay for each stock based on the dividend-growth model?

### Write a Review

#### Design square column footing for in square tied interior

Design a square column footing for a 18-in square tied interior column that supports a dead load D= 220 k and a live load L=180 k. The column isreinforced with eight bars, the base of the footing is 4 ft below grade

#### Calculate the pressure in psignat the bottom of the tank

Assume a hydrostatic condition in a cubic tank with 64ft length, 32ft width and 16ft height. The tank is filled with 15ppg( pounds per gallon) fluid. Calculate the pressure in psignat the bottom of the tank.

#### Calculate the residence time of the treatment cell

Consider a rectangular wastewater treatment cell having a length of 100ft, width of 20ft and depth of 20ft. If the flow into the cell is 50ft^3/min, calculate the residence time of the treatment cell.

#### How to design the curve of the roadway at station

An equal tangent vertical curve is to be constructed between grades of -3.0% (initial) and 1.0% (final). The PVI is at station 110+00 and elevation 420 ft. Due to a street crossing the roadway, the elevation of the roadway at station 112+00 must b..

#### Determine what are air flow and particulate concentration

Three streams of polluted air are combined prior to treatment in an electrostatic precipitator (ESP). The flow and particulate concentration of each stream are 600 cfm at150 mg/m^3, 700 cfm at 200 mg/m^3, and 500 cfm at 1000 mg/m^3.

#### Determining specific gravity

The cross sectional dimensions of a 4-ft-long wood member at 30% moisture content is 1.5 in. x 7.5 in., and its weight is 11 lb. At oven-dry condition, its dimensions and weight are 1.35 in x 6.8 in., and 10.2, respectively. What is its specific g..

#### Calculate the normal and shear stress on planes making angle

a tension member with cross-sectional area 3 in2 resists a load of 10 kips. How do you Calculate the normal and shear stress on planes making a 0, 20, 45, and 60 angle with the transverse section.

#### Determine what is the speed in rpm of the car wheels

If a car engine is turning at 4000 rpm, the transmission gear ratio is 3:1 and the final drive ratio is 4:1. (a) what is the speed in rpm of the car wheels and (b) the vehicle speed if the tire radius is 8 inches

#### What is porportion of potential energy head at crosssection

if a pipeline is horizontal, what is the porportion of the potential energy head at the upstream crossection that is changed to kinetic energy head at the downstream crossesction

#### How to determine the critical depth by interpolation

water flows from a lake into a steep natural channel. the water surface elevation of the lake is 97.0 with respect to the datum. the channel properties are given below. determine the flow rate in the channel

#### Estmate the capacity of the roadway

given s=.30/(60-u), where s is the spacing (space headway) in miles, and u is the speed in miles per hour, derive the relationships u-k, u-q, and q-k. Also, estmate the capacity (qmax) of the roadway.

#### Calculate pump power equired to operate the heat exchanger

The heat exchanger consists of 12 m of copper tubing that is 2 cm in diameter with 19 return bends. The flow rate is 3 x 10-4 m3/s. Water enters at 20 C and exits at 80 C. The elevation difference between the entrance and the exit is 0.8 m.