### Find the required column reinforcement

Assignment Help Civil Engineering
##### Reference no: EM13542634

A rectangular column of size 16" x 16" is to be designed for the following loads. Service D.L = 150 kips ft, Service LL = 200 kips-ft. DL Moment = 80 ft- kips, LL Moment =130 ft kips. Find the required column reinforcement.

### Write a Review

#### A rectangular clarifier with a lengthwidth ratio of 31

a rectangular clarifier with a lengthwidth ratio of 31 receives a flow of 850m3day. the clarifiers depth is 4.0m and

#### Find wavelength-celerity and group celerity in deep water

Offshore in deep water, a wave gage measures the height and period of a train of waves to be 2m and 7.5 s respectively. The wave train propagates toward the shore in a normal direction without refracting and the nearshore bottom slope is 1:40.

#### Compute permeability in ft per second on cylindrical sample

A lab experiment of permeability test was carried out on a cylindrical sample of sand 3 inch in diameter and 4 inch in height. 9 in3 of water was collected in 2 minutes, under a head (water level difference) of 11 inch. Compute the permeability in..

#### What is probability that it will be found by both inspectors

Items are inspected for flaws by two quality inspectors. If a flaw is present, it will be detected by the first inspector with probability 0.9, and by the second inspector with probability 0.7. Assume the inspectors function independently.

#### Coefficient of friction-skidding resistance

Two passenger cars are traveling at 65 MPH on a highway moving in the same direction in the same lane. The cars are separated by 25 feet for every 10 MPH of their speed. The coefficient of friction (skidding resistance) between the tires and the r..

#### Provide zero-air voids curve for the soil on the same plot

a) Density plot, locating γd(max) and ω opt on the plot b) Zero-air voids curve for the soil on the same plotc) Curve representing S = 70%

#### Determine the velocity of the solid sphere

A solid steel sphere with a specific gravity of 7.85 and diameter of 0.02 m is falling at its terminal velocity through water at 25 °C. Using either trial-and-error or a graphical approach, determine the velocity of the sphere

#### How to determine the force that must be applied at a

The uniform load has a mass of 450 and is lifted using a uniform 35- strongback beam and four ropes. Determine the Tension in the ropes Determine the force that must be applied at A.

#### What is the vertical shear stress distribution at each point

For a narrow horizontal rectangular beam of width b and depth h (cross section), determine a) what is the vertical shear stress distribution (tau)xy at each point y along the cross section,

#### Estimate the diffusion distance of a carbon atom in fe

The variation in the diffusion coefficient with temperature, over an appropriate range of temperature, can usually be approximated as follows: D= (D0)e^-(Q/(KT) where, Q = activation energy (eV/atom) and k = Boltzmann's constant (8.616*10-5 eV/ato..

#### Determine the side slopes of a suppressed trapezoidal sharp

Determine the side slopes (i.e. 1:3, etc.) of a suppressed (n=0) trapezoidal sharp crested weir with width B and upstream head H so that the discharge through it is the same as that through a rectangular sharp crested

#### Calculate the winter and summer population expected at end

During the summer months (December - March), the town population increases to 9,000 people due to holiday makers. The population growth rate was expected to be 1.5% per year