Find the optimal temperature versus time profile

Assignment Help Chemical Engineering
Reference no: EM131157602

A catalytic process was designed to make 150,000 metric tons per year of product with a net profit of $0.25/lb of product. The catalyst for the process costs $10/lb and it takes two months to shut down the process, empty the old catalyst, reload fresh catalyst, and restart the process. The feed and product recovery and purification sections can be pushed to make as much as 120% of design basis capacity. The reactor section is sized with sufficient catalyst to make 100% of design basis when operated with fresh catalyst at 500 °F. The reactor can only be operated at temperatures up to 620 °F, for safety reasons. The reactor weight hourly space velocity (lb of product per hour per lb of catalyst) is given by the equation:

1619_image06222015028.png

where t = time on stream in months

T = time on stream in months T = temperature

Find the optimal temperature versus time profile for the reactor and determine how long the process should be operated before the catalyst is changed out.

Reference no: EM131157602

Questions Cloud

What is the ch nurses role in this intervention : How will you reach out to your target population? How will you get your target population involved? What is the CH Nurses role in this intervention? Will you collaborate with anyone (e.g., physician's office, church, local resources, etc.?)
What type of products or services provided by organization : What are the type of products or services provided by the organization? Select one of four basic financial statements that you feel this organization would typically use and share the most valuable information learned from the financial statement.
Do you think your definition is universal : Think about how you define health. Do you think your definition is universal, or is it specific to your culture and/or beliefs? How might another culture's definition differ?
Prepare the journal entries that served as the sources : Prepare the journal entries that served as the sources for the five transactions. Include an explanation for each entry.
Find the optimal temperature versus time profile : Find the optimal temperature versus time profile for the reactor and determine how long the process should be operated before the catalyst is changed out.
Do you make rules for yourself or your family : Do you make rules for yourself or your family? Explain your personal "rulemaking" process. In your opinion, what is involved in successful establishment of rules, and/or in the creation of successful rules?
Identify the audience or population : Identify the audience or population that you seek to educate about this issue: Search the Internet to find credible sites containing information about your selected topic.
Compare the power requirement of compressing the hydrogen : A two-stage centrifugal compressor will be used for both duties. Take the polytrophic efficiency for both compressors as 70%. The hydrogen supply pressure is 120 kN/m2 and the temperature 25 °C. The hydrogen chloride is cooled to 50 °C after leavi..
What is the minimum number of shares : What is the minimum number of shares you need to own to ensure that you can elect at least one director if the company has majority voting?

Reviews

Write a Review

Chemical Engineering Questions & Answers

  What is the temperature and phase in tank

A closed tank, 1 m3 in volume is filled with water at 1 bar 80 °C. A second identical tank contains 20 kg of steam at 20 bar. What is the mass of water in tank 1?

  Product in the manufacture of ethylene

Acetylene is formed as a by-product in the manufacture of ethylene. It is removed by selective hydrogenation using noble metal catalysts (see, for example, US 7,453,017). A particular catalyst achieves 90% acetylene saturation with 50% hydrogen se..

  Composition of the flue gases

The composition of a gas derived by the gasification of coal is, volume percentage: carbon dioxide 4, carbon monoxide 16, hydrogen 50, methane 15, ethane 3, benzene 2, balance nitrogen. If the gas is burnt in a furnace with 20% excess air, calcula..

  Develop a block diagram for a bcd encoder

Based on the 8421 BCD code for decimal digits 0 through 9, develop a block diagram for a BCD encoder and its implementation scheme.

  Can gps signals be reliably received at every location

Is this level of resolution sufficient for finding the entrance to a building? Can dead reckoning and inertial guidance help when GPS signals are lost?

  Find the transfer rate if the time constant equals 27 103 s

Two compartments, with equal volumes of 0:0572 cm3, are separated by a thin membrane. If all of the solute is initially dumped into one compartment, then find the transfer rate if the time constant equals 27 103 s.

  Heavy metal from a waste stream by electrodeposition

For removal of a heavy metal from a waste stream by electrodeposition, the electrolyte porosity is anticipated to decrease with time as determined by Faraday's law. For a Pb2+ present at 10mg/liter, given a flow rate of 100 liters/hour, how large mus..

  Calculate the value of kc for the reaction ag+(aq) + cl-(aq)

Calculate the value of Kc for the reaction Ag+(aq) + Cl-(aq) → AgCl(s) if the concentrations at equilibrium are [Ag+] = 10-8M, [Cl-] = 0.01M.

  What the transmitted angle will be through the tissue

If the transmitted beam is reversed, so that it impinges on the interface from the glass side, calculate what the transmitted angle will be through the tissue. Does this make sense? Explain

  Determine the minimum electric potential difference

Determine the minimum electric potential difference (in volts) that must be applied to accelerate an a-particle so that on interaction with a hydrogen atom, a ground state electron will be excited to n = 6

  Calculate the flow rates of burets

Calculate the flow rates of burets Y and Z. Assume the flow rates remain constant during the experiment.

  How much heat per hour is extracted from the steam

Steam at 100°C is passed into a condenser at a rate of 500 kg/h and leaves as water at 60°C. If the condenser is supplied with cooling water which enters at 20°C and leaves at 40°C, calculate:- how much heat per hour is extracted from the steam.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd