Find the gravitational attraction between them

Assignment Help Civil Engineering
Reference no: EM13557032

1.The radius and length of a steel cylinder are 60mm and 120 mm , respectively. If the mass of density of steel is 7850 Kg/m^3, determine the weight of the cylinder in pounds?

2.When a force F acts on a linear spring, the elongation x of the spring is given by F=kx, where K is called the stiffness of the spring. Determine the dimension of K in terms of the base dimensions of an absolute system of units ?

3.Two identical spheres of radius 8 in . and weighing 2 lb on the surface of the earth are placed in contact. find the gravitational attraction between them .

Reference no: EM13557032

Questions Cloud

Determine how high the elevator is from the ground the : A man riding upward in a freight elevator drops a package off the elevator when it is 100 ft. from the ground. Part A: if the elevator maintains a constant upward speed of 4 ft/s,
Solve the positioning intersection equations dealing with : A minimum of how many satellites must be tracked in order to solve the positioning intersection equations dealing with position (ultimately northing, easting, and elevation coordinates)?
Find the angle in degrees between vector a and the resultant : The acceleration of a particle traveling along a straight line is a=(1/4)s^1/2 m/s^2, where s is in meters. If v=0, s=1 m when t=0, determine the particle's velocity at s=2m
Determine the acceleration of the boxes : Boxes are placed on a slope at uniform intervals of time trelease and slide down the slope with uniform acceleration. Knowing that as a box B is released, the preceding box A has slid 6 meters down the slope and that 1 second later they are 10 meters..
Find the gravitational attraction between them : Two identical spheres of radius 8 in . and weighing 2 lb on the surface of the earth are placed in contact. find the gravitational attraction between them .
Determine the distance between the stations : A train starts from rest at station A and accelerates at 0.5m/s^2 for 60s. Afterwards it travels with a constant velocity for 25min. It then decelerates at 1 m/s^2 until it is brought to rest at station B. Determine the distance between the stations
Determine the initial speed of the ball and the angle : From a videotape, it was observed that a player kicked a football 126 {\rm ft} during a measured time of 3 seconds. Determine the initial speed of the ball and the angle(theta) at which it was kicked
Determine the required cross sectional area of the cables : The magnetic declination at a certain place is 12 degree 6 minutes W.What is the magnetic bearing there (a) of true north (b) of true south and (c) of true west?
Compute moisture content : A soil core is selected that consists mostly of quartz and has a total volume of 200 mL. The soil mass as collected (i.e., wet) is 326 g and 290 g after it is dried.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Find hp per foot of cutting edge ratio for all 4-conditions

The Caterpillar D6R Series 3 and D8R tractors are rated, respectively, at flywheel horsepowers (fwhp) 0f 185 and 305. The "A," "S," and "SU" blade widths (length) for the D6R are S, 16 ft, 9 in.; A, 17 ft, 1 in

  What would be amount in moles if the container held nitrogen

A container with volume 0.2 m^3 holds oxygen and has gages showing readings of 70°C and 25 bars. Calculate the amount of oxygen (mass and moles) in the container if the atmospheric pressure is 1 bar.^3

  Determine the concentration of carbon in this alloy

The microstructure of an iron-carbon alloy consistsof proeutectoid ferrite and pearlite; the mass fractions of thesetwo microconstituents are 0.174 and 0.826, respectively. Determinethe concentration of carbon in this alloy.

  Compute the station and elevation of the curve turning point

Set up a table showing curve elevations at the PVC, at the PVT, and at the half-station points along the curve. Compute the station and elevation of the curve turning point.

  Determine horizontal force p that must be applied to move

The wedge is used to level the member. Determine thehorizontal force P that must be applied to move the wedge to theright. The coefficient of static friction between the wedgeand the two surfaces of contact is ts=.25.

  What is the thickness of the viscous sublayer

The influent BOD5to a primary settling tank is 345 mg/L.The average flow rate is 0.050 m3/s.If the BOD5 removal efficiency is 30%,How many kg of BOD5 are removed in the primary settling tank each day?

  Determine what is the drag coefficient at sea level

A 2,150 lb car is traveling at sea level at a constant speed. Its engine is running at 4500 rev/min and is producing 150 ft-lb of torque. It has a driveline efficiency of 90%, a driveline slippage of 2%, 15-inch radius wheels and an overall gear r..

  The dynamic magnification of response compared

Detennine (1) the required shaker frequency to cause "resonance" and (2) the dynamic magnification ofresponse compared with static response for that level of damping.

  Find expected error l if odolite has direct angular accuracy

Calculate expected error L if a theodolite has direct angular accuracy of 10" and a distance of 1500m was measured.

  Difference between total and static pressure

The difference between the total and static pressure before a shock is 75 psi. What is the maximum static pressure that can exist at this point ahead of the shock? The gas is oxygen.

  What is the length of shrinkage

A meter long steel plate with a rectangular cross section(10mm x 50mm) is resting on a frictionless surface under the sun.the plate temperature is measures to be at 40C.the plate is then moved into a cold room and is left to rest on a frictionless su..

  Usage rates if the community has a declining growth rate

Determine how many years from now the consumption will reach its design capacity with current usage rates if the community has a declining growth rate.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd