Determine the acceleration of the boxes

Assignment Help Civil Engineering
Reference no: EM13557033

Boxes are placed on a slope at uniform intervals of time trelease and slide down the slope with uniform acceleration. Knowing that as a box B is released, the preceding box A has slid 6 meters down the slope and that 1 second later they are 10 meters apart, determine the following:

(a) The value of trelease

(b) The acceleration of the boxes.

Reference no: EM13557033

Questions Cloud

What will the cars maximum acceleration be under these : A car is traveling on a paved road with CD = 0.35, Af = 21 ft2, W = 3000 lb, ? = 0.002378 slugs/ft3. Its engine is running at 3000 rpm and is producing 250 ft-lb of torque. The car’s gear reduction ratio is 3.5 to 1
Determine how high the elevator is from the ground the : A man riding upward in a freight elevator drops a package off the elevator when it is 100 ft. from the ground. Part A: if the elevator maintains a constant upward speed of 4 ft/s,
Solve the positioning intersection equations dealing with : A minimum of how many satellites must be tracked in order to solve the positioning intersection equations dealing with position (ultimately northing, easting, and elevation coordinates)?
Find the angle in degrees between vector a and the resultant : The acceleration of a particle traveling along a straight line is a=(1/4)s^1/2 m/s^2, where s is in meters. If v=0, s=1 m when t=0, determine the particle's velocity at s=2m
Determine the acceleration of the boxes : Boxes are placed on a slope at uniform intervals of time trelease and slide down the slope with uniform acceleration. Knowing that as a box B is released, the preceding box A has slid 6 meters down the slope and that 1 second later they are 10 meters..
Find the gravitational attraction between them : Two identical spheres of radius 8 in . and weighing 2 lb on the surface of the earth are placed in contact. find the gravitational attraction between them .
Determine the distance between the stations : A train starts from rest at station A and accelerates at 0.5m/s^2 for 60s. Afterwards it travels with a constant velocity for 25min. It then decelerates at 1 m/s^2 until it is brought to rest at station B. Determine the distance between the stations
Determine the initial speed of the ball and the angle : From a videotape, it was observed that a player kicked a football 126 {\rm ft} during a measured time of 3 seconds. Determine the initial speed of the ball and the angle(theta) at which it was kicked
Determine the required cross sectional area of the cables : The magnetic declination at a certain place is 12 degree 6 minutes W.What is the magnetic bearing there (a) of true north (b) of true south and (c) of true west?

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the hydraulic conductivity of an artesian aquifer

An experiment was conducted to determine the hydraulic conductivity of an artesian aquifer. The piezometric heads at two points 150m apart were found to be 55 m and 48.5 m above a datum.

  Determine the lengths of dg and cb of triangular tract

ABC is a triangular tract of land. The 1.5 tract DEFG is to be subdivided. AE is 480ft and DC is 350 ft. Determine the lengths of DG and CB. (Note 1 acre= 43,560 f^2)

  Determine the moment about the pin due to the force

1.For an SO2 emission rate of 22,000 kg/day and an exhaust gas flow rate of 5.0 million m^3/hour(after the scrubber) measured at 150 C and 1atm pressure, calculate the concentration of SO2 in the exhaust gases(ppm).

  Physics two skaters with masses of 65 kg and 45 kg

physics two skaters with masses of 65 kg and 45 kg respectively stand 8.0 m apart each holding one end of a rope. if

  Purpose of the international space station

Briefly explain the purpose of the International Space Station, and list the name of all space agencies involved in building and operating it.

  What is the undrained shear strength of the clat in kpa

A saturated clay deposit is vane-tested in-situ. A torque of 30Nm is required to shear the clat. The vane is 40mm wide by 100mm long. What is the undrained shear strength of the clat in kPa

  How many laterals would be required in the leaching field

A time interval of 1.5 hours is recorded for a 6 inch drop of water level in a percolation (perc) test hole. What is the perc rate. How many laterals would be required in the leaching field to serve a 5 bedroom house,

  Determine the inlet volumetric flow rate for the ammonia

The magitude of the power input to the compressor is 7,5kW and there is heat tranfser from the compressor to the surroundings at a rate of 0.15kW. Kinetic and potential energy are negligible.

  Explain how to design for bending only using lrfd

A simply supported steel beam over a 24-ft span carries a uniformly distributed dead load of 2 k/ft, including an allowance for the self-weight, and a live load of 3.5 k/ft. The steel is A992, Grade 50.

  Find the force

Two smooth circular cylinders of weight w=500N and radius r=200mm are connected at their centres by a string AB of length 600mm and rest upon a horizontal plane.

  Determine what is flexural rigidity ei of the diving board

Consider a diver weighing 200 lb at the end of a diving board that cantilevers out over 3 ft. The diver oscillates at a frequency of 2 Hz. What is the flexural rigidity EI of the diving board

  Provide the velocity distribution for steady flow case

An infinite, long, solid, vertical cylinder of radius R is located in infinite mass of compressible liquid. Provide the velocity distribution for steady flow case

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd