Find all contact forces to the contacting surfaces

Assignment Help Civil Engineering
Reference no: EM13317535

Cylinders A & B weigh 500N each and cylinder C weighs 1000N. Assuming frictionless contact between all surfaces, find all contact forces. Diameters A&B= 1, C=2. Frictionless contact means forces are normal to the contacting surfaces. A= Fac= 670.82N, VA=1000N, Ha=447.22N Could you please post detailed solution. graph description= A&C contact and C &B wherees a and b are in contact with surface

Reference no: EM13317535

Questions Cloud

What is the relationship between duration and the amount of : Maximum Pension Fund is attempting to balance one of the bond portfolios under its management. The fund has identified three bonds that have five year maturities and trade at a yield to maturity of 9 percent
Calculate the change in vertical effective sress on the roof : The foof of the culvert will be located 3 m below ground surface. Currently the groundwater level is at ground surface. But, after installation of the culvert, the groundwater level is expected to drop 2 m below ground surface.
What are the angular velocities : The angular position of a point on the rim of a rotating wheel is given by %u03B8 = 4.01t - 6.34t2 + 2.63t3, What are the angular velocities at t = 3.19 s and t = 6.06 s
Would a consol trading at a yield to maturity : What is a consol bond? What is the duration of a consol bond that sells at a yield to maturity of 8 percent? 10percent? 12percent? Would a consol trading at a yield to maturity of 10 percent have a greater duration than
Find all contact forces to the contacting surfaces : Cylinders A & B weigh 500N each and cylinder C weighs 1000N. Assuming frictionless contact between all surfaces, find all contact forces. Diameters A&B= 1, C=2. Frictionless contact means forces are normal to the contacting surfaces.
What is the mass of the other body : A body of mass 1.2 kg makes an elastic collision with another body at rest and continues to move in the original direction but with 1/7 of its original speed. What is the mass of the other body
What is the relationship of duration to the relative : A six-year, $10,000 CD pays 6 percent interest annually and has a 6 percent yield to maturity. What is the duration of the CD? What would be the duration if interest were paid semiannually?
Slope stability analysis with rocscience software : Design the open pit mine slope and we have to do analysis - Project proposal in this want literature survey ,research problems ,research methods ,summary ,references
Determine stretch of cord when the system is in equilibrium : The two disks each have a mass of 25kg and are attached at their centers by an elastic cord that has a stiffness of k = 1.6kN/m . Determine the stretch of the cord when the system is in equilibrium

Reviews

Write a Review

 

Civil Engineering Questions & Answers

  Calculate the final length and final diameter of specuman

A cylinder with a 6.0 in., diameter 12.0 in. height is put under a compresive load of 150 kips. The modulus of elasticity for this specimen is 8000 ksi and Poisson's ratio is 0.35. calculate the final length and the final diameter of this specuman..

  What is the total equivalent through volume on the approach

An intersection approach volume is 1,500 veh/h and includes 12% left turns with a through-vehicle equivalent of 2.3 tvu's/left turn. What is the total equivalent through volume on the approach

  Calculate the maximum temperature and maximum pressure

in an air standard otto cycle , the air at the beginning of the compression stroke is at 95 kpa and 22c ,and the cylinder volume is 0.0028 m^3 . the compression ratio is 9 and 4.3 kj are added during the heat addition process

  What will lowest dissolve oxygen concentration be downstream

A wastewater is discharged to a stream with a reoxygenation constant of 0.5 day-1 and a velocity of 1 m/sec. The oxygen saturation concentration in the stream is 11 mg/L.

  Determine the maximum force p that can be applied

The coefficient of static friction between each crate and the ground is 0.25 The crates are next to each other connected by a rope and then from the other end one has a P force going up at an angle of 30 degrees

  How many moles of aluminum

How many moles of aluminum do 5.2×1024 aluminum atoms represent?

  Determine what is the total energy per unit mass

A fluid in an aquifer is 23.6m above a reference datum; the fluid pressure is 4390 N/m2. The fluid density is 0.999E3 kg/m3. What is the total energy per unit mass What is the total energy per unit weight

  What is the settling velocity of a micrometer silica sphere

What is the settling velocity of a .5 micrometer silica sphere at 20 degrees Celsius and an ambient pressure of 150 kPa. The density of silica is 2600 kg/cubic meter.

  Determine what would be the carbon emission rate

Suppose in 100 years energy consumption is still 330 Ej/yr, but coal supplies only 20 percent of total demand, natural gas supplies 30 percent, and oil 10 percent. The remaining 40 percent of demand is met by noncarbon-emitting sources.

  Superelevation rate for a roadway

What superelevation rate would you recommend for a roadway with a design speed of 100 km/hr and a radius of curvature of 500 m? Assume f = 0.11.

  Component of the force fac along the axis of strut

Determine the projected component of the force fac along the axis of strut ao. Express the result as a cartesian vector.

  Determine maximum moment in the beam if spinned at both ends

If the live load on a 30 foot long beam is 1.2 kip/feet and the dead load is 0.8 kip/feet determine the maximum moment in the beam (kip-ft) if it is pinned at both ends. Assume the weight of the steel is 0.3 kip/feet.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd