Estimate the surface temperature of the cable

Assignment Help Chemical Engineering
Reference no: EM131300720

1. A horizontal electrical cable of 25-mm diameter has a heat dissipation rate of 30 W/m. If the ambient air temperature is 27°C, estimate the surface temperature of the cable.

2. An electric immersion heater, 10 mm in diameter and 300 mm long, is rated at 550 W. If the heater is horizontally positioned in a large tank of water at 20°C, estimate its surface temperature. Estimate the surface temperature if the heater is accidentally operated in air at 20°C.

Reference no: EM131300720

Questions Cloud

Write about about the multi-year budget evaluation : Prepare a report in which you cover the following information about the multi-year budget evaluation: trends of revenue sources and balances (funds, surpluses, deficits)
Features of the compensation system : If you were hired by a company such as Antle, would you feel comfortable working under the compensation system it has in place? Why or why not? Depending on your response, outline what features of the compensation system would make you the happies..
Improved or eliminated through training : Identify basic causes for deficiencies in performance which of these deficiencies can be Improved or eliminated through training? Finally give a dynamic environment, how would you approach the deficiencies that can be reduce through training
How did the circumstances for african-american change the 20 : How did the circumstances for African-American (and potentially other minorities) change the 20th century after the establishment of the Jim Crow system following Reconstruction? Consider social, economic, political and geographic aspects of this..
Estimate the surface temperature of the cable : A horizontal electrical cable of 25-mm diameter has a heat dissipation rate of 30 W/m. If the ambient air temperature is 27°C, estimate the surface temperature of the cable.
Calculate the heat loss per unit length for a calm day : For the conditions of part (a), calculate the heat loss with a 20-mm-thick layer of insulation (k = 0.08 W/m· K). Would the heat loss change significantly with an appreciable wind speed?
Explain the pros and cons of four provider payment methods : Explain the pros and cons of four provider payment methods: (a) fee-for-service; (b) capitation; (c) global capitation; and (d) bundled payment.
Write about current real estate market condition : Write a 1 page review/commentary on an article from a magazine, newspaper, Wall Street Journal, etc. on the following topics. Topic: Current Real Estate Market Condition
Calculate the heat loss per unit length from the pipe : A horizontal rod 5 mm in diameter is immersed in water maintained at 18°C. If the rod surface temperature is 56°C, estimate the free convection heat transfer rate per unit length of the rod.

Reviews

Write a Review

Chemical Engineering Questions & Answers

  Draw the truth table for the full adder

Figure P6.1.39 shows a full adder with the idea of adding Ci to the partial sum S' , which is the same logic process as addition with pencil and paper.

  Write balanced chemical equations for both these steps

This solution is then reacted with an acidic solution containing periodate ion; the products are the permanganate and iodate ions. Write balanced chemical equations for both these steps.

  Draw a catalytic cycle for one initermolecular

Analysis of these publications outline the chiral ligands used and draw a catalytic cycle for one initermolecular and one intramolecular reaction - the asymmetric Heck reaction

  Calculate the molarity of each of the solutions

Calculate the molarity of each of the following aqueous solutions. a. 5.0 ppb Hg in H2O b. 1.0 ppb CHCl3 in H2O c. 10.0 ppm As in H2O d. 0.10 ppm DDT (C14H9Cl5) in H2O

  Sample preparation for infrared spectroscopy

List two reasons why water is seldom used as a solvent in sample preparation for infrared spectroscopy.

  The band gap of the indium gallium arsenide sample in ev

The band gap of indium gallium arsenide varies based on the concentration of gallium in the material. A sample of indium gallium arsenide absorbs light with a wavelength less than 1.37 microns. What is the band gap of the indium gallium arsenide samp..

  What is displayed in an mri image

Of the three imaging axes, which are actively controlled and which are passively sensed?

  What effect would that have on torganism''s genome content

How might this fact be used in gene finding algorithms?

  Estimate the plate thickness required at the base of tank

The maximum liquid level in the tank will be at 16 m. Estimate the plate thickness required at the base of the tank. Take the allowable design stress for aluminum as 90 N/mm2.

  Calculate single pass conversion of a in the reactor

Calculate the single pass conversion of A in the reactor

  Find the three highest speeds at which this linkage possible

Find the three highest speeds at which this linkage would be possible.

  Calculate the equilibrium conversion

Calculate the equilibrium conversion, then redo parts (a) through (c) to achieve a concentration that is 90% of the calculated equilibrium conversion.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd