User Account

All Pages

Estimate the power required by the pump

Assignment Help Chemical Engineering
Reference no: EM131157563

A tanker carrying toluene is unloaded, using the ship's pumps, to an onshore storage tank. The pipeline is 225 mm internal diameter and 900 m long. Miscellaneous losses due to fittings, valves, etc., amount to 600 equivalent pipe diameters. The maximum liquid level in the storage tank is 30 m above the lowest level in the ship's tanks. The ship's tanks are nitrogen blanketed and maintained at a pressure of 1.05 bar. The storage tank has a floating roof, which exerts a pressure of 1.1 bar on the liquid.

The ship must unload 1000 metric tons within 5 hours to avoid demurrage charges. Estimate the power required by the pump. Take the pump efficiency as 70%. Physical properties of toluene: density 874 kg/m3, viscosity 0.62 mNm-2

Reference no: EM131157563

Questions Cloud

How necessary is it to fine-tune your marketing plan : How is the marketing of services different than the marketing of a product? What are the challenges of marketing a service? How is marketing shoes different from marketing shoe repair?
Sketch a p&i diagram of the reactor and feed section : What pressure would you choose for operation of the fermenter, and how would you control it?
Analyse the fundamentals of tax determination : Analyse the fundamentals of tax determination for individuals and business organisations - Critically analyse and explain the various types of taxation such as fringe benefits tax, capital gains tax and goods and services tax.
Discuss the differences between each of the given methods : Discuss the differences between each of these methods. Please provide the different accounting treatments (i.e. journal entries) of the following transaction for both Cash Base Accounting vs. Accrual Base Accounting:
Estimate the power required by the pump : The ship must unload 1000 metric tons within 5 hours to avoid demurrage charges. Estimate the power required by the pump. Take the pump efficiency as 70%. Physical properties of toluene: density 874 kg/m3, viscosity 0.62 mNm-2
Should a mission statement also be a marketing tool : Name the six steps in the marketing research process as discussed in the Kotler text. Why is it important to include all of these steps in the research process?
Compute the first years depreciation using straight line : Compute the first years depreciation using the following methods:-Straight-line-Double-declining balance - Which method do you think is the most representative of accurate depreciation of the goal posts?
Calculate the composition of the reactor outlet stream : Nitrobenzene is fed to the reactor as a vapor, with three times the stoichiometric quantity of hydrogen. The conversion of the nitrobenzene, to all products, is 96%, and the selectivity for aniline is 95%.
What each line looks like in relation to original given line : Discuss the steps necessary to carry out each activity. Describe briefly what each line looks like in relation to the original given line.

Reviews

Write a Review

Chemical Engineering Questions & Answers

  Determine the ratio of starting torque to full-load torque

Calculate the tap pings k on a three-phase autotransformer to limit the starting current to 4 times the full load current. For such a limitation, determine the ratio of starting torque to full-load torque.

  Estimate the overall mass transfer coefficient kl

What is the molar concentration of the ammonia in the liquid at the interface?

  How many kilograms of natural gas are flowing

How many kilograms of natural gas are flowing through the pipelines per hour ( use different steps required in material balance calculations).

  Hydrogenation of phenol to a mixture

Adipic acid is used in the manufacture of nylon 6,6. It is made by hydrogenation of phenol to a mixture of cyclohexane and cyclohexane (known as KA oil-ketone and alcohol), followed by oxidation with nitric acid.

  Estimate the weight of this person''s right leg

Suppose a 125-lb person lies supine on a board resting on knife edges spaced 72 in. apart (Fig. 5.7). Assume that the center of gravity of the lower limb is located through the center line of the limb and 1.5 in. above the knee cap. Estimate the w..

  Calculate the entropy of propane at its critical point

Use the Lee-Kesler method- Calculate the entropy of propane at its critical point. The reference state is the ideal-gas state at the critical point.

  Questiona personal protective equipment are only used when

questiona personal protective equipment are only used when it has proven impractical to control occupational hazards by

  Compute the transformer''s all-day efficiency

Draw a schematic diagram of the arrangement showing all the voltages and currents while delivering full load.

  What are the advantages of external recruiting

What are the advantages of external recruiting?

  Determine the heat- transfer area

If a double-effect evaporator system is used with forward feed and U = 450 Btu/h-ft2-°F and 112 = 350 Btu/h-ft2-°F, and a vapor- space pressure of 4 in. Hg in the second effect determine the heat- transfer area of each effect, assuming equal areas..

  What is the maximum efficiency of a steam

What is the maximum efficiency of a steam engine operating between 20° C and the boiling point of water, 100 °C, at one atmosphere?

  What is the depreciation cost during the sixth year

what is the depreciation cost during the sixth year

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

Submit Assignment

Academics

Major Subjects

Majors

Get In Touch

whatsapp: +1-415-670-9521

Phone: +1-415-670-9521

Email: [email protected]

TERMS & POLICIES

HELP & SUPPORT

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd