Develop an algorithm that can aid hotel management

Assignment Help Civil Engineering
Reference no: EM131032250 , Length: word count:2500

Assignment-

2.1 Introduction-

UK has advanced in implementing the sustainability and improved building efficiency in its construction sector and positioned itself ahead of most European countries. However, since most of the UK's building comprises of old existing ones, it is important that appropriate attention must be aimed towards making existing buildings to be sustainable and efficient. This study is conducted to evaluate the requirements that should be considered by hotel management when they intend to undertake a refurbishment work of their property.

2.2. Objectives

Part 1-

2.2.1. Identify all key documents that should be considered when undertaking hotel refurbishment

2.2.2. Review all key documents and key criteria for identifying these documents

2.2.3 Develop a method to priorities the criteria (e.g which of the documents are more important, which should be considered simultaneously etc)

2.2.4 Develop a cost estimate for each identified criteria (For example, a percentage estimate cost for refurbishment works that has to do with cooling system or another estimate for refurbishment work that involves windows or lighting etc.)

Part 2

2.2.5. Based on outcomes from part 1 of the project, students should develop an algorithm that can aid hotel management to make decisions on what parts of the building should be refurbished based on which is most favourable for (energy consumption reduction, cost implications and CO2 emission reduction). The algorithm should be presented in form of a flow chart.

Reference no: EM131032250

Questions Cloud

James confectioners ratio analysis : James Confectioners Ratio Analysis Liquidity Ratios Current Ratio = Current Assets Divided By Current Liabilities
Discuss the properties of the dft in relation : Produce a diagram of the composite signal and produce diagrams of each individual component of the signal - Produce a diagram of the composite signal and discuss the properties of the DFT in relation to the properties of the components of the compos..
What is the cost and vitamin content of final product : Woofer Pet Food produces a low-calorie dog food for overweight dogs. This product is made from beef products and grain. Each pound of beef costs $0.80, and each pound of grain costs $0.50. A pound of the dog food must contain at least 10 units of Vit..
Immigration reform priorities : A Gallup Poll asked, "If you had to choose, what should be the main focus of the U.S. government in dealing with the issue of illegal immigration-developing a plan for halting the flow of illegal immigrants into the U.S.
Develop an algorithm that can aid hotel management : Based on outcomes from part 1 of the project, students should develop an algorithm that can aid hotel management to make decisions on what parts of the building should be refurbished based on which is most favourable for (energy consumption reduct..
Analyze the value of leadership theory for contemporary : In 300 words or more, analyze the value of leadership theory for contemporary and future organizations. There are established leadership theories and streams with quite long research histories; other streams of leadership theory,
Does your country have fixed or floating exchange rates : The currency of your country. Is it stable? Does your country have fixed or floating exchange rates? Does the exchange rate fluctuate a lot? The banking system in your country.
Internet technology to maintain a virtual storefront : A virtual company: uses the capabilities of other companies without being physically tied to those companies. uses Internet technology to maintain a virtual storefront. uses Internet technology to maintain a networked community of users. provides ent..
Select technology within any criminal law enforcement agency : If you selected a fictional program, technology, or building, then be sure to provide an adequate amount of fictional information/details. What is the purpose of the program? Explain.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the flow rate of the oil

Oil of a specific gravity of 0.75 is flowing through a 6-in pipe under a pressure of 15 psi. If the total energy relative to the datumplate is 8.0 ft below the center of the pipe is 58.6 ft, determine the flow rate of the oil.

  Calculate the maximum bending stress produced in the pole

A Timber power-line pole is 10 in. in diameter at its base where it is solidly embedded in concrete. The pole extends 20 ft vertically upward from its base and is subjected to a horizontal pull of 300 lb at its top.

  How large could the plant be without having the ground level

A 35 percent-efficient coal-fired power plant with effective height of 100 m emits SO2 at a rate of 0.6 lb/10^6 Btu into the plant. If winds are assumed to be 4 m/s at the stack height and just over 3 m/s at 10 m

  What is postmodern urbanism

What is postmodern urbanism? Who are the architects who took a postmodern urbanism approach? How they compare against compare architects' theoretical statements towards postmodern urbanism?

  Define how long this person needs to climb stairs

A 150-pound person burns 400 Calories per hour while climbing stairs. Determine how long this person needs to climb stairs to burn off the dinner calories.

  Determine the magnitude of reaction

Determine the magnitude of reaction at point A (in kips) of a 20' beam with 5kips at 4' of the beam and 2kips at 9' of the beam at 350lbs./ft.

  What is the min possible value for the pressure difference

Part of a vertical piping system consists of 8 ft of 4 in diameter, connected to 8 ft of 3 in diameter above, and connected to 8 ft of 2 in diameter above that. Water at 60 F flows up the pipe (no downward flow occurs).

  Calculate the mass of the atmosphere using the correlation

The density of atmospheric air varies with elevation, decreasing with increasing altitude. Using the data given in the table, obtain a relation for the variation of density with elevation, and calculate the density at an elevation of 7000 m.

  Develop the relation between bulk unit weight

develop the relation between bulk unit weight, specific gravity, void ratio and weight of water.

  What is the new water content

A soil sample with a water content of 14.5% and unit weight of 128.2 lb/cu. ft. was dried to a unit weight of 118.8 lb/cu. ft. without changing its void ratio. What is its new water content (in %)?

  Calculate the gradient under which the flow is occurring

The relative density of a sloped sand deposit is known to be 75%. Water is observed to be seeped through this slope at a rate such that the discharge velocity is 0.6 m/day. If the hydraulic conductivity for this deposit is 4×10-4 m/s.

  Find the load bearing strength of a support beam

Looking a wood (pine) deck material.  It's a simple 8' by 8' deck.  There's a support beam holding up this deck. Other end is connected to building.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd