Develop a techno-economic analysis

Assignment Help Chemical Engineering
Reference no: EM13943638 , Length: word count:10000

Subject:Chemical Engineering Phd level Software involve (Aspen Plus) around 40 pages (10000 words).

Topic: Waste Wood Biomass and Energy Issues (Wood waste biomass as potential feed stock for power generation: A case study of Nigeria)

Aim:

The main aim of this project is to develop a techno-economic analysis of Thermo chemical processing route for the conversion of wood waste biomass in Nigeria to energy. The bio-energy scenarios will be modelled using Aspen Plus.

Objectives:

(i) To accurately determine of the amounts and locations of wood waste in Nigeria, together with estimation of the fraction available for collection and the cost of collection and transport to suitable central locations

(ii) To carry out comprehensive literature review of literature related to wood waste conversion processes. Existing experimental will also be collected from literature

(iii) To develop a process model of wood waste conversion process using Aspen Plus software

(iv) To validate the process model developed in (iii) using experimental data collected in (ii)

(v) To carry out process and economic analysis using the model developed

(vi) Complete an economic assessment of waste treatment options using the processing model developed

This technological implication could help in gathering such options which would decrease the level of dependence on conventional power generation processes. The development through various biomasses have been tested yet by the scientists. The reason for using the wood waste or the ashes is its potential presence in Nigeria electricity efficiency, the economic feasibility and positive environmental impact it could be providing.

Concerning the amount of wood waste present in Nigeria, it has been found from various studies that about from 1.8 million tonnes per year of saw dust (wood waste) are produced from lumber industries in Nigeria, about 1.3 TWh of electricity can be generated from 1000 MW power plant. Power generation via the utilization of this biomass prove to be a possible path to Nigeria's economic, social and environmental sustainability but the extent to which this can achieved is strongly dependent institutional framework, investment, incentives and information policies.

Reference no: EM13943638

Questions Cloud

Analyse legal issues and relebvant case law : In June 2013, theft happened in company and Dozey got hurt when he try to find some stock back. The company is insolvent and has liquidation due to financial crisis. Analyse legal issues, relebvant case law, legal principles and legal reasons
What bid price should you submit on contract : Consider a project to supply 115 million postage stamps per year to the U.S. Postal Service for the next five years. You have an idle parcel of land available that cost $2,050,000 five years ago; if the land were sold today, it would net you $2,250,0..
Services to three different types of technologies : Asynchronous Transfer Mode (ATM) offers services to three different types of technologies: Constant Bit Rate (CBR), Unspecified Bit Rate (UBR) and Available Bit Rate (ABR). Each technology has its pros/cons when dealing with ATM.
Annual salary through payroll deduction and matches dollar : Kristin Caldwell has just graduated from college and is considering job offers from two companies. Although the salary and insurance benefits are similar, the retirement programs are not. The other firm has a contributory plan that allows employees t..
Develop a techno-economic analysis : Waste Wood Biomass and Energy Issues and develop a techno-economic analysis of Thermo chemical processing route for the conversion of wood waste biomass in Nigeria to energy.
Information and communication technology infrastructure : In this Group Project, assume that you and the members of your group are top managers of a big international company spread over several continents. You decide to rebuild/expand your company's Information and Communication Technology infrastructur..
The discount rate and the time increases-the future value : Other things equal, as the discount rate and the time increases, the future value:
Value chain designs and structures : Task Identify two organisations in an industry of your choice. These organisations must have clearly different value chain designs and structures.
Portfolios should have the most systematic risk : Which one of the following portfolios should have the MOST systematic risk?

Reviews

Write a Review

Chemical Engineering Questions & Answers

  Heat transfer problems

HEAT TRANSFER PROBLEMS NO16- Water flowing in a steel pipe of diameter 0.02 m is to be cooled from 40 to 30 oc . The velocity of water in the steel pipe is 1.5 m/s .

  Shape for an above-ground dwelling

What is the optimum practical shape for an above-ground dwelling to minimize the heat losses through the building fabric? When is (or was) this optimum shape used? Why is this optimum shape seldom used in richer societies?

  Both a negative gain and a right-half plane zero

What is the order of the overall transfer function, G(s) = V(s)/U(s)? (b) What is the gain of G(s)? Under what condition(s) is the process gain negative?

  Report about ht nitriding of the form of corrosion

Write a comprehensive report about HT Nitriding of the form of corrosion, the report include and discerption of the corrosion form

  What you expect to happen as t and w increase or decrease

A completely enclosed stirred-tank heating process is used to beat an incoming stream whose flow rate varies. The heating rate from this coil and the volume are both constant.(a) Develop a mathematical model (differential and algebraic equations) tha..

  Find the maximum torque and power which the clutch transmits

A civil engineer is designing a road. At what angle should he bank the road surface in a curve of radius 70m so that there is no tendency for a vehicle traveling at 90 km/h to slip sideways, either up or down the banking.

  Low-cost loan at an interest rate

The adipic acid plant described in Examples 9.5 and 9.9 is to be built in China, with a location factor of 0.85. The cost estimate needs to be updated from 2006 to 2012. Up to 45% of the total investment can be secured as a low-cost loan at an int..

  Operate at essentially atmospheric pressure

Design a column for this separation. The column will operate at essentially atmospheric pressure. Use a reflux ratio 1.5 times the minimum.

  Lewis relation ship in air drying

A value of mass transfer coefficient kg = 0.0150 kg /m2-s . it was also found that the corresponding heat transfer co efficient = hc = 15 j /m2-s

  Calculate the work for the gas compression

Consider the following cyclic process carried out in two steps on a gas: Step 1: 45 J of heat is added to the gas, and 10. J of expansion work is performed. Step 2: 60. J of heat is removed from the gas as the gas is compressed back to the initial..

  Determine the heat- transfer area

If a double-effect evaporator system is used with forward feed and U = 450 Btu/h-ft2-°F and 112 = 350 Btu/h-ft2-°F, and a vapor- space pressure of 4 in. Hg in the second effect determine the heat- transfer area of each effect, assuming equal areas..

  Complete combustion of acetylene

The complete combustion of acetylene, C2H2(g), produces 1300. kJ of energy per mole of acetylene consumed. How many grams of acetylene must be burned to produce enough heat to raise the temperature of 1.00 gal of water by 10.0C if the process is ..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd