Determine what is the void ratio of the soil

Assignment Help Civil Engineering
Reference no: EM13306329

A natural deposit of soild was found to have water content of 20% and to be 90% saturated. What is the void ratio of the soil?

Reference no: EM13306329

Questions Cloud

Determine what is the porosity of the soil sample : The sample is placed in a 103 F oven overnight and is weighted again the next day. If the weight after drying is 0.85 lb and the specific gravity of the soil granuals is 2.65, what is the porosity of the soil sample
Sort the array in the descending order using pointers : Create functions for the following tasks and make sure to pass a pointer to the table (array) as an argument to each of them.
Find what is the builder capitalized cost to const the plant : A home builder must construct a sewage treatment plant and deposit sufficient money in a perpetual trust fund to pay the $5000 per year operating cost and to replace the treatment plant every 40 years.
Explain why this relation is not normalized : Assume that ProjectNumber determines ProjectName and explain why this relation is not normalized?
Determine what is the void ratio of the soil : A natural deposit of soild was found to have water content of 20% and to be 90% saturated. What is the void ratio of the soil
What is the accuracy of a two-bit predictor : What is the accuracy of a two-bit predictor, assuming the predictor starts off in the bottom left state? What if the pattern repeats forever?
Determine the fine grains of low plasticity : Soil A is micaceous with an average grain relative density of 2.80, and has a high plasticity in its fine fraction. The ground quartz-feldspathic B is, with an average relative density of 2.65 and fine grains of low plasticity.
Calculate and display the total retail value of all products : It should calculate and display the total retail value of all products sold. Use a sentinel-controlled loop to determine when the application should stop looping display the final results.
Obtain the frequency of the motion : A vertical spring (spring constant =165 N/m) is mounted on the floor. A 0.390-kg block is placed on top of the spring, Obtain the frequency (in Hz) of the motion

Reviews

Write a Review

Civil Engineering Questions & Answers

  Calculate the total load on the test cylinder stress

Calculate the compressive stress (in psi) for a 6-in diameter by 12-in high concrete test specimen if the total deformation under load is 0.015 in. Calculate the total load on the test cylinder stress.

  How to show the transition on the speecific energy curve

A rectangular channel has water flowing at a depth of 1.6 ft with a corresponding specific energy of 1.736 ft. A step up on the channel bed resulte in the flow becoming critical. The critical depth is 1.29 ft and corresponding specific energy is 1..

  Simple curve having central angle problem

A simple curve has a central angle of 42 degreess. A point Y is located 24m from the vertex and has a perpendicular distance of 3.00m from the back tangent.

  At what angle did the player have to shoot the cue ball

(a) At what angle did the player have to shoot the cue ball so that the eight ball entered the pocket at C? (b) In what direction did the cue ball move after the collision? (c) What percentage of its kinetic energy did the cue ball impart to the e..

  Determine the flow of vehicles on the level section

From an aerial photograph, one observes that on a level section of a (multilane) highway, 25% of the vehicles are trucks, 75% are cars, and there are 50 vehicles per mile of highway. The trucks travel at 40 mph and the cars at 60 mph.

  Determine exact expression which gives isothermal work done

A substance for which k is a constant undergoes an isothermal, mechanically reversible process from initial state(P1-->V1) to (P2-->V2), where V is a molar volume. a) Starting with the definition of k, show that the path of the process is described

  What is the total equivalent through volume on the approach

An intersection approach volume is 1,500 veh/h and includes 12% left turns with a through-vehicle equivalent of 2.3 tvu's/left turn. What is the total equivalent through volume on the approach

  Determine the force members bc, fc, and fe

Determine the force members BC, FC, and FE, and state if the members are in tension or compression.

  Does concentration exceed the 24-hr air quality standard

Suppose the average concentration of SO2 (SOsub2) is measured to be 400microgram/cu.m at 25degree celcius and 1 atm. Does this exceed the (24-hr) air quality standard of 0.14 ppm

  Find what is the pressure on the soil if theta is 45 degrees

A pipe is to be installed under the ground on a bed of aggregate 6 in. thick. The entire weight on the aggregate from pipe and soil above the pipe is 1800 lbs. per linear foot of pipe. What is the pressure on the soil if theta is 45 degrees

  Do the first three time increments by hand

A variable-order reaction A-->B has the following rate expression: R(a) = -kC(a)/(K+C(a)) where k = 5mg/L-hr and K=40mg/L The reaction is to take place in a batch reactor. The initial concentration is 450 mg/L

  Obtain the dimensionless groups that charactrize the problem

The power loss, p , in a journal bearing depends on length, L; diameter, D; clearance, c; and rotational speed, w. You also have to worry about lubricant viscosity, density, and pressure. Obtain the dimensionless groups that charactrize this probl..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd