Determine what is the stationing and elevation of the pvc

Assignment Help Civil Engineering
Reference no: EM13310572

A vertical curve is designed for 55 mi/h and has aninitial grade of +2.5% and a final grade of 1.0%. The PVT is at station 114 + 50. It is known that a point onthe curve at station 112 + 35 is at elevation 245 ft. What is the stationing and elevation of the PVC ? What is thestationing and elevation of the high point on the curve?

Reference no: EM13310572

Questions Cloud

How many lines per cm does the grating have : Sodium light of wavelength 589nm falls on a diffraction grating and its first-order peak on a screen 60.0cm away falls 3.32cm from the central peak. How many lines per cm does the grating have
Determine what is the value of degree for the sand : A square footing 0.3 m by 0.3 m is placed on the surface of a dense cohesionless sand (unit weight = 18.2 KN/m^3) and subjected to a load test. If the footing fails at a load of 13.8 KN, what is the value of (degree) for the sand
Discuss roger''s duties as a director : Discuss Roger's duties as a director and any defenses he has to the lawsuit.
What is the thickness of the film : A thin film of alcohol (n=1.36) lies on a flat glass plate (n=1.51). When monochromatic light is incident normally on the system, What is the thickness of the film
Determine what is the stationing and elevation of the pvc : A vertical curve is designed for 55 mi/h and has aninitial grade of +2.5% and a final grade of 1.0%. The PVT is at station 114 + 50. It is known that a point onthe curve at station 112 + 35 is at elevation 245 ft.
Evaluate delta g at 298 k for the formation : High levels of ozone (O3) make rubber deteriorate, green plants turn brown, and cause people to have difficulty breathing. Calculate delta G at 298 K for the formation of 1 mole of O3 from O2 in urban smog, where [O2]=0.210 atm and [O3]=5.00x10^-7..
Determine the support reactions and the force in each member : The space truss shown is supported by a ball-and-socket joint at D and by short links at A and C. Determine the support reactions and the force in each member of the space truss.
What is the difference in their intensity levels : Two sound waves have intensities of 0.100Wm^2 and 5.00W/^2. What is the difference in their intensity levels
Explain the values for nitrous acid (hno2) and hypochlorous : The values for nitrous acid (HNO2) and hypochlorous (HClO) acid are 4.5 x 10^-4 and 3.0 x 10^-8 , respectively. Which one would be more suitable for use in a solution buffered at pH = 7.0

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the produce of inertia for the shaded area

Determine the produce of Inertia, Ixy, for the shaded area to the right using integration. Use the parallel axis theorem to find Ibarxy, the product of inertia with respect to the centroidal axes.

  Determine to the nearest 1 by 4 in the smallest dimension h

If A and B are both made of wood and are 3/8 in thick, determine to the nearest ¼ in the smallest dimension h of the support so that the average shear stress does not exceed \tauallow = 300 psi.

  Determine the values of stress and the change in thickness

A rectangular steel plate with thickness t=0.625 inches is subjected to normal stresses sigma x and sigma y.The strain in the x direction is known to be 0.00065 and the strain in the y direction is known to be 0.0004.

  Estimate low-dose cancer risk from occupational inhalation

the recommended threshhold limit value ( TLV-ACGIH) air concentration for occupational exposure to water-insoluble hexavalent chromium Cr (VI) is 0.01 mg/M^3. this concentration is based on an assumption that the individual is generally healthy an..

  Provide the mass balance diagram and balance equations

Assume that the sludge does not change density during filtration and that liquid removed from the sludge contains no sludge. Using mass-balance method. determine the volume of sludge after filtration.

  Hydrograph for a watershed having a drainagearea

For the data given below, derive the 2-hr unit hydrograph for a watershed having a drainagearea of 216 km^2, assuming a constant baseflow of 20 m^3/s.

  How much larger should street name be in order to be legible

street nam sizes on the signs at a certain location can be discerned by a person with 20/40 vision from a distance of 300 ft. how much larger should the street names be in order to be legible to a person with 20/50 vision from a distnace of 450 ..

  Compute the resisitivity at a reservoir depth of 8000 feet

Given the total dissolved solids in a brine is 20,500 ppm, compute the resisitivity at a reservoir depth of 8,000 feet.

  Crash at a railroad crossing

Due to a crash at a railroad crossing, an overpass is to be constructed on an existing level highway. the existing highway has a design speed of 50 mi/h.

  How much more flow in cfs will be attained with project

If a 96-inch brick sewer (n = 0.015) is laid on a slope of 0.01% is set to be rehabilitated with GIPL (n = 0.01) that will need 2-inches all around it. How much more flow, in cfs will be attained with this project

  Compute unit weight under conditions when sand is dry

A sand with Gs=2.66 and e=0.60 is completely dry. It then becomes wetted by a rising groundwater table. Compute the unit weight under the following conditions: a.) when the sand is completely dry

  Compute relative compaction based on modified proctor test

sand cone test has been performed . The test results: intial weight of cone + sand =13.51lb, Final weight of sand cone + sand= 4.26lb, weight of sand to fill cone=2.12lb, weight of soil from hole+bucket=12.42lb, weight of bucket=1.21lb

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd