Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
Raw primary sludge at a solids concentraion of 4% is mixed with waste activated sludge at a solids concentration of .5%. The flows are 20 and 24 gal/min respectively. What is the resulting solids concentration? This mixture is next thickened to a solids concentration of 8% solids. What are the quantities (in gal/min) of the thickened sludge and thickener overflow (water) produced? Assume perfect solids capture in the thickener.
If e is some value at midspan and e=0 at each end of the beam, and the cable within the beam has a parabolic profile. what is the expression I need to use to determine e at some other lenth along the beam
A NaOH solution has pOH at 8. How much volume of this NaOH solution is needed to prepare 1 L of a NaOH solution at pOH at 9.
A wave has a height of 1.5 m in water 5 m deep and a wave period of 6 s. Plot the horizontal component of velocity, the vertical component of acceleration, and the dynamic pressure at a point 2 m below the still water level versus time for a 6-s i..
An open channel with a trapezoidal configuration with side batters 1V:3H is to be designed to carry 1.0m^3/s with a bedslope of 0.0065. The channel is lined with concrete with manning's n of 0.011.
Assuming the lagoons are well mixed and that there are no losses or gains of water in the lagoon other than the sewage input, what biodegradation reaction rate coefficient (in day^-1) must be achieved for a first order reaction that governs the de..
A distance of 200 ft must be taped in a manner to ensure a standard deviation smaller than ± 0.03 ft. What must be the standard deviation per 100 ft tape length to achieve the desired precision?
Water flows down a spillway at the rate q = 15 m^3/s into a horizontal channel where v1 = 20 m/s. Determine the depth of flow in the channel y2 that will casue the hydraulic jump to occur in the channel. Determine the headloss hL in the jump.
Consider a beam of length 1.5L(meters) with hinge support and roller support from both the ends (respectively left and right) at distance of L/4. The beam is subjected to triangular loading from 0 to q KNper meter.(left to right)
A cast iron water main 14m long of 600 mm inside diameter and 30 mm wall thickness runs full of water and is supported at its ends. Calculate the maximum stress in the metal if density of cast iron is 7200 kg/m and that of water is 1000 kgm.
Assuming that the nozzle is well insulated and operating at steady state and that the air behaves as an ideal gas, calculate (a) the mass flow rate of air in kg/s, (b) the exit area of the nozzle in m^2,
A consolidated-drained triaxial shear test on a normally consolidated clay yielded a drained friction angle of 28 degrees. If the confining pressure during the test was 15 psi, what was the major principal stress at failure.
The meter inlet and throat are connected by the two legs of a mercury manometer. Use the Bernoulli equation to describe how this manometer can be used to measure the flow rate through the meter.
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd