Determine the volume-temperature and pressure at all state

Assignment Help Civil Engineering
Reference no: EM13326431

Air enters an air - standard Otto cycle with a pressure and temperature of 1 bar and 15 C respectively. The compression ratio is 9 and the bore and stroke of the cylinder are (10 cm, 12 cm). The heat added to the air due to combustion is 500 J. Determine:

a) the volume, temperature and pressure at all state points,

b) the thermal efficiency, and c) the mean effective pressure, in atm.

Take y=1.4; R =0.287 kJ/kg.K

Reference no: EM13326431

Questions Cloud

Find what are the probable genotype of the parent plants : Color in a type of squash is controlled by a single gene. The squash can be either white or yellow, with white squash (W) dominant to yellow (w). if 1/2 of the offspring are white, what are the probable genotype(s) of the parent plants
Determine the properties at the final state and the amount : Two tanks (Tank A and Tank B) are separated by a partition. Initially Tank A contains 2 kg of steam at 1 MPa and 300 ?C while Tank B contains 3 kg of saturated liquid-vapor mixture at 150oC with a vapor mass fraction of 50%
Find what is the velocity m per s in the upstream pipe : A pressure gage connected between the upstream pipe and throat section shows a pressure difference of 29 kPa. The gasoline velocity in the throat section is 14 m/s. What is the velocity (m/s) in the upstream pipe
Analyze the cycle from 1st and 2nd thermodynamics point view : A proposed combined cycle power plant is shown below. A gas turbine engine, the topping cycle, takes air at state 1 (T=300 K, P=100 kPa) and compress it irreversibly (hc=0.87) to state 2.
Determine the volume-temperature and pressure at all state : Air enters an air - standard Otto cycle with a pressure and temperature of 1 bar and 15 C respectively. The compression ratio is 9 and the bore and stroke of the cylinder are (10 cm, 12 cm).
What is the weight density of the mortar sample : A sample of mortar fills a900 ml beaker. The mortar and beaker combined weighs 3 lb and theempty beaker weighs 2 oz. What is the weight density of this mortar sample
What is the bulk densityof a box filled with 88 marbles : What is the bulk densityof a box filled with 88 marbles, each of which weighs 1/2 oz, wherethe box weighs 9 oz and has interior measurements of 4" x 5" x10"
What is the maximum miles down the track for a siding : Freight train A passes through Petticoat Junction, a node where twosingle track lines connect, at 6:50 AM, traveling at 40 MPH, with50 cars that are 70 feet nose to nose. A faster train B jumps ontothe same track at the junction at 9:20 AM.
What the workplace 2020 organization will look like : State why your Workplace 2020 organization does or does not conform with the organizational design trends discussed in this chapter.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Compute the bearing pressure at each corner of the footing

that acts at a 45 degree angle from the side of the footing (it acts diagonally across the top of the footing) determine whether the resultant force acts within the kern. If it does, then compute the bearing pressure at each corner of the footing.

  Drawing the shearing force diagram

Draw the shearing force diagram and the moment diagram of the following problem. The beam is indeterminate. You need to integrate the moment twice to get a formula for the deflection v(x).

  Explain what is the hydraulic residence time of the river

An industry is illegally discharging benzene into a river. The concentration in the river at the point of discharge is 0.2 mg/L. A drinking water treatment plant (DWTP) is located 1.5 km downstream. The water velocity in the river is 0.35 km/day.

  Estimate the land area in acres that must be purchased

The city has a stable population of 235,000 residents and the design criteria for the new landfill are as follows: MSW generation rate = 4.0 lb/(person-day); density of the compacted MSW in the landfill is 775 lb/yd3

  Calculate critical depth and critical slope in an earth-line

A flow of 28 m3s-1 occurs in an earth-lined canal having a base width of 3 m, side slopes of 1(vertical) to 2 (horizontal) and the Manning's n value of 0.022. Calculate the critical depth and critical slope.

  Determine the maximum bending stress on the outside surface

A concentrated moment is applied to the free end. Determine the maximum bending stress on the outside surface of the cylinder and the maximum bending stress on the inside surface of the cylinder.

  Find angular acceleration needed to keep prisoner in beam

Find the angular velocity and angular acceleration needed to keep the prisoner in the beam of the spot light at the moment when the prisoner is 4000 ft away from the spot light.

  Determine internal shear and moment at specified location

Write a computer program that can be used to determine the internal shear and moment at any specified location x along the beam, and plot the shear and moment diagrams for the beam.

  What is the height above ground level in the afternoon

Natural gas is stored in very large vessels consisting of a floating tank and a liquid seal. The pressure in the tank is constant because the weight of the floating tank is constant. In the morning, the temperature of the natural gas is 300 K.

  Which project will company choose on present value criteria

A company facing an interest rate of 8% must choose among projects offering the following four-year cash flows. If the company is employing the net present value criterion, which project should they choose

  Estimate the min do and the critical location in river

After initial mixing, the DO concentration in the river is 9.5mg/L and the temperature is 15ºC. If the ultimate BOD of the mixed river water is 30mg/L,

  Determine specific gravity if vol of the pot is 450ml

While washing up Grandma's old aluminum cooking pot I noticed that it would just barely touch the bottom of the sink if I added 2.5 cups of water to it. The pot is 3.5 in high and 9.5 in diameter. Thickness of aluminum is 3/16 in.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd