Determine the temperature at which the liquid in the tank

Assignment Help Civil Engineering
Reference no: EM131030571

A rigid tank with a volume of 2.5 m3 contains 15 kg of saturated liquid-vapor mixture of water at 75°C. Now the water is slowly heated. Determine the temperature at which the liquid in the tank is completely vaporized. Also, show the process on a T-v diagram with respect to saturation lines.

Reference no: EM131030571

Questions Cloud

What is relationship of water table to surface topography : In Figure 1, what is the relationship of the water table to surface topography? Considering the cost of drilling and operating a ground-water well, where would you site the least expensive well?
Determine the rate of heat transfer to the pan : Water is boiled at 1 atm pressure in a 25-cm-internaldiameter stainless steel pan on an electric range.
Demonstrate your ability to plan and budget : Demonstrate your ability to plan and budget  - demonstrate your understanding of the concepts, understandings and processes that have been introduced in this unit and
Design the new addressing scheme for the network : Design the new addressing scheme for the network through the use of graphical tools in Microsoft Visio or an open source alternative such as Dia. Note: The graphically depicted solution is not included in the required page length.
Determine the temperature at which the liquid in the tank : Now the water is slowly heated. Determine the temperature at which the liquid in the tank is completely vaporized. Also, show the process on a T-v diagram with respect to saturation lines.
What are the different types of media : What are the different types of media that can be used to connect different computers together into a computer network? Twisted pair cables are used for connecting computers to a network. Distinguish between straight-through and crossover cable con..
Should organizations use software service providers : It has been said that within the next few years, smartphones will become the single most important digital device we own. Discuss the implications of this statement.
Show the process on a t-v diagram with respect to saturation : determine (a) the pressure, (b) the quality, and (c) the enthalpy. Also, show the process on a T-v diagram with respect to saturation lines.
Describe in detail the water treatment plant : Describe in detail the water treatment plant - The polyelectrolyte dosing process and the sludge blanket conditioning (TFG) and control within the upward flow clarifier

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine x and z components of force required to hold

The stream hts a stationary splitter, such that half of the flow is diverted upward at 45o. and the other half is directed downward, and both streams have a final speed of 18ft/s.

  Calculate air velocity and mass flow rate through the slit

the room described in problem 8.1 gas a 1 m wude door with a 1 cm high slit at the floor level. THe oil spill has a rectagular area of sides 0.5 m by 0.5 m. (a) calculate the pressure increase, the air velocity, and the mass flow rate throug the sl..

  What is the probability that the amound absorbed at the end

During the two hour period, an intermediate reading reveals that the percent absorbed is 3 percent. What is the probability that the amound absorbed at the end of the two hour period will be greater than 5 percent?

  Determine the distance that a particle on the rim moves

The flywheel of a prototype car engine is under test. The angular position of the flywheel is given by x = (3.0rad/s3)t3 and the diameter of the flywheel is 36cm.

  Determine the speed with which b must walk toward a

Swimmer A immediately starts walking toward B at a speed of 2ft/s relative to the raft. Knowing that the raft weighs 300 lb, determine (a) the speed of the raft if B does not move, (b) the speed with which B must walk toward A

  Determine if the drive way will be affected

A developer wants to provide access to a new building from a driveway placed 1000 ft upstream of a busy intersection. He is concerned that queues developing during the red phase of the signal at the intersection will block access.

  Determine the radius r of the inner core of the shaft

a solid shaft of radius r is subjected to a torque T, determine the radius r' of the inner core of the shaft that resists one half of the applied torque (T/2)

  How the mechanical properties of aluminum may be improved

Given that the moduli of electricity of this material are respectively 69GPa and 393 GPa plot modulus of elasticity versus the volum percent of Al2O3 in Al from 0 to 100 vol % using both upper and lower bound expressions

  What is the difference in reservoir elevations for 20 cfs

The characteristics of the line are 5,000 ft of steel pipe (e = 0.00015 ft) which has an ellipsoidal cross section (flow area = 4 ft^2; wetted perimeter = 8 ft); three standard elbows (K = 0.9 per elbow); a globe valve (K = 10); and a re-entrant p..

  Determine the magnitude of p

A 50-kg crate is pulled by the constant force P at an angle of 30 deg off the x axis- the crate starts from rest and achieves a speed of 10 m/s in 5 s. the coefficient of kinetic friction between the crate and ground is 0.2. Determine the magnitude o..

  Find the probability that the student

Suppose that in a senior college class of 500 students it is found that 210 smoke, 258 drink alcoholic beverages, 216 eat between meals, 122 smoke and drink alcoholic beverages

  What flow rate does the filter handle during production

A rapid sand filter has a loading rate of 8.00 m/h, surface dimension of 10m x 8m, an effective filtration rate of 7.70 m/h, and a production efficiency of 96 percent.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd