Determine the steady-state concentration of the pollutant

Assignment Help Civil Engineering
Reference no: EM13296983

A well-mixed sewage lagoon (a shallow pond) is receiving 430 m^3/d of sewage out of a sewer pipe. The lagoon has a surface area of 10 ha (hectares) and a depth of 1 m. The pollutant concentration in the raw sewage discharging into the lagoon is 180 mg/L. The organic matter in the sewage degrades biologically (decays) in the lagoon according to first- order kinetics. The reaction rate constant (decay coefficient) is 0.7 d^-1. Assuming no other water losses or gains (evaporation, seepage, or rainfall) and that the lagoon is completely mixed, find the steady-state concentration of the pollutant in the lagoon effluent.

Reference no: EM13296983

Questions Cloud

How many turns does the secondary have : A transformer for an answering machine takes an ac voltage of amplitude170V as its input and supplies a8.4V amplitude to the answering machine. How many turns does the secondary have
Find the final velocity of each mass : A 15.5kg object moving in the +x direction at 7.0m/s collides head-on with a 11.0kg object moving in the -x direction at 6.0m/s, Find the final velocity of each mass if the objects stick together
Determine is the flow rate typical for a bathroom faucet : Water in a household plumbing system originates at the neighborhood water main where the pressure is 480kPa, the velocity is 5m/s, and the elevation is 2.44 m. A 19 mm (3/4-in) copper service line supplies water to a two-story residence
How a nerve impulse travels : write a paragraph about how a nerve impulse travels across a synapse +neurotransmitter combines
Determine the steady-state concentration of the pollutant : A well-mixed sewage lagoon (a shallow pond) is receiving 430 m^3/d of sewage out of a sewer pipe. The lagoon has a surface area of 10 ha (hectares) and a depth of 1 m. The pollutant concentration in the raw sewage discharging into the lagoon is 18..
Determine the length of pipe required for coliform : The maximum permissable fecal coliform concentration that may be discharged is 2,000 fecal coliform CFU/L. It is proposed that a pipe carrying the wastewater be used for disinfection process.
Which topological space that we have previously encountered : Which topological space that we have previously encountered appears to be topologically equivalent to the quotient space that results from this partition?
Design a curve for the highway by computing the radius : The PI is at station 250+50, the design speed is 65mi/h, and a maximum superelevation of 0.07 ft/ft is to be used. If the central angle of the curve is 38 degrees, design a curve for the highway by computing the radius and stationing of PC and PT.
How far stream of section would expect to find uniform flow : The slope of the channel is .15% and the mannings roughness coefficient is .038. estimate the depth 100m upstream of a section where the flow depth is 2.2m using the standard step method. Approximate how far upstream of this section would you exp..

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the settlements

Determine the settlements when a stress of 100 kPa is applied by the building over an area of 10m × 5 m on the soil surface.

  Calculate the largest tolerable internal crack length

Calculate the largest tolerable internal crack length for a 7075-T651 aluminum alloy component that is loaded to a stress one-half of its yield strength without catastrophic fracture. For the alloy, the plane strain fracture toughness is 24 and yi..

  Determine the pressure head at the nozzle inlet to produce

determine the pressure head at the nozzle inlet to produce a water jet velocity of 40 ft/s. Neglect the friction loss and assume incompressible flow.

  Largest principal stresses and maximum shear stress

The shaft diameter is 100 mm. Calculate the largest principal stresses and maximum shear stress that will occur in the shaft.

  Determine the difference in the rate of grade

indicate the conditons by a sketchand determine the difference in the rate of grade at the intersection of each of the following paris of slops.

  Compare the physical migration of workers

Compare the physical migration of workers during U.S. industrialization and present-day intellectual transition into a new type of workforce.

  Estimate the undrained shear strength of clay

Plot variation with depth from the top to Point C for σ' v and σ h when the soil is at rest and Estimate the undrained shear strength (c u ) of clay. (Assume the shear strengths to be 200 kPa and 2 kPa at Liquidity Index (IL) values of 0 and 1, res..

  Give beam deflection solution

Beam Deflection Solution, Derive an expression for the deflection due to shear for a cantilever beam of constant rectangular cross section, under action of a point load, P at free end.

  What is the factor of safety against sliding

a concrete dam retaining water has a specific weight of concrete of 23.5kn/m3, what is the factor of safety against sliding & overturning and pressure intensity on the base if coefficient of friction is 0.45.

  Mixed liquor volatile suspended solids

For a mixed liquor volatile suspended solids (MLVSS) of 1800 mg/L, what is the total return solids flow rate?

  Design a column base plate

Design a column base plate for a W10 x 33 column supporting a service dead load of 20 kips and a service live load of 50 kips. The column is supported by a 12-inch x 12-inch concrete pier. Use A36 steel and f 'c = 3 ksi. Answer 12 x 12 x 5/8

  Concept of strengthening mechanisms

Describe in your own words the three strengthening mechanisms i.e., grain size reduction, solid solution strengthening, and strain hardening. Be sure to explain how dislocations are involved in each of the strengthening techniques.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd