Determine the prism constant with the measurements

Assignment Help Civil Engineering
Reference no: EM13317627

To verify the constant of a particular prism, a straight line EFG is laid out. The EDM instrument is first set up at E, with the following measurements recorded: EG = 426.224 m, EF = 277.301 m. The EDM instrument is then set up at F, where distance FG is recorded as 148.953 m. Determine the prism constant.

Reference no: EM13317627

Questions Cloud

Determine how to convey 2 cfs through the system : A pump of 80% efficiency lifts water from one large open tank to another; the difference in water surface elevations is 20 feet. The pipe is relatively smooth (f = 0.0122), and has 3 elbows, each with a loss coefficient of 2/3.
Discuss why oligopolists have a strong incentive to collude : Discuss why oligopolists have a strong incentive to collude and to cheat on collusive agreements and discuss the obstacles to collusion among oligopolistic companies.
Locate the point at which the total electric field is zero : Two point charges lie along the y-axis. A charge of q1 = -9.5 %u03BCC is at y = 6.0 m, Locate the point (other than infinity) at which the total electric field is zero
Determines output and discuss price and output under : Describe how a profit-maximizing monopolist sets prices and determines output and discuss price and output under oligopoly, with and without collusion.
Determine the prism constant with the measurements : To verify the constant of a particular prism, a straight line EFG is laid out. The EDM instrument is first set up at E, with the following measurements recorded: EG = 426.224 m, EF = 277.301 m.
Explain the impact of time on the elasticity of market : Explain the impact of time on the elasticity of market supply and discuss the role of profits and losses in a purely competitive market.
At what voltage will capacitor exhibit dielectric breakdown : Consider a parallel-plate capacitor with an area of 1.1 cm2, At what voltage will this capacitor exhibit dielectric breakdown
Advanced finance and risk management : Is there directional risk that the bank faces? That is, does the bank gain or lose when the index goes up? When it goes down and is there volatility risk that the bank faces? That is, does the bank gain or lose when volatility goes up? When it goes d..
Determining the shape of a long-run market supply curve : Contrast the role of constant-cost, increasing-cost, and decreasing-cost industries in determining the shape of a long-run market supply curve.

Reviews

Write a Review

Civil Engineering Questions & Answers

  How is the spent carbon removed from the pressure contactors

Testing has already been completed on the water and the Usage Rate for the carbon is 0.4 pounds of carbon per 1000 gallons of water treated. The required EBCT is 20 minutes and the carbon longevity must be at least 6 months.

  Determine the trade off between the cost and the head loss

The headloss per meter for galvanized iron pipe (.02 m diameter) hL= 0.110m and for (0.15m diameter) hL= 0.490m. Determine the trade off between the cost and the head loss (hL).

  When will the queue clear

where u(t) is in vehicles per minute and t is in minutes. When will the queue clear?

  How many pounds of copper sulfate should be dissolved

You have determined that a 0.5 ppm concentration of copper sulfate should be applied to a lake to control the growth. The lake volume is 50 ac-ft. How many pounds of copper sulfate should be dissolved in the lake

  Calculate the peak bending moment for the roof beam

Calculate the peak bending moment for the 4x10 roof beam. Then draw a clear dimensioned FBD for the two exterior bearing walls above the floor joists, no moment calcs here.

  At what distance will the concentration of metals be 5 ppm

Assume the stream is 3ft wide and 1ft deep (assume a rectangular cross section. If the flow throught the stream is 1000 gallons/day and the concentration at the beginning of the stream is 250 ppm

  Calculate the minimum reflux ratio required with a feed

A continuous distillation column containing plates is required to distil a 46% w/w ethanol (C2H5OH) in water solution. The overhead product must contain 91 % w/w ethanol and the bottom product 5 % w/w ethanol.

  Civil engineering - structure design

Structural design of reinforced cast in - place concrete - Structure design

  What are expressions for shear-v and bending moment-m

What are the expressions for the shear, V, and the bending moment, M, within the beam between points C and D in terms of Ay, M1, l, w, and x, the distance to the sectional cut from the beam's left end

  Find entropy changes of refrigerant and thermal reservoir

A thermal reservoir (T=308K) is brought in contact with the tank, transferring enough heat to the tank to raise the pressure inside to 4 bar. Calculate the entropy changes of the refrigerant and the thermal reservoir

  Explain how transformation affects drawing of scatterplot

a. Use algebra and linearity of the expectation operator to find the answer. b. Explain how the transformation affects the drawing of the scatterplot we used to develop our understanding of covariance, and therefore why the answer to part a. shoul..

  Calculate the alkalinity due to hco3- and co3-2

A water sample has phenolphthalein alkalinity (PPA) of 30 mg/L as CaCO3 and total alkalinity (TA) of 84 mg/L as CaCO3. If OH alkalinity is 5.3 mg/L as CaCO3, Calculate the alkalinity due to HCO3- and CO3-2.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd