Determine the pressure head at the nozzle inlet to produce

Assignment Help Civil Engineering
Reference no: EM13210828

Water flows steadily through a horizontal nozzle. The nozzle inlet diameter is 6 in. At the nozzle outlet, where the pressure is atmospheric, the diameter is 2 in. determine the pressure head at the nozzle inlet to produce a water jet velocity of 40 ft/s. Neglect the friction loss and assume incompressible flow.

Reference no: EM13210828

Questions Cloud

Sketch and annotate the wedge described above : Sketch and annotate the wedge described above.
What must be the standard deviation : A distance of 1000 feet is to be taped in a manner to ensure a standard deviation smaller than ±0.06 feet. What must be the standard deviation per 100-ft tape length to achieve the desired precision?
Compute the concentration of co at equilibrium : it decomposes into CO gas and Cl2 gas. If 12.5g of COCl2 is initially placed in a 2.20L container at 575K, calculate the concentration of CO at equilibrium. Kc= 2.50 * 10^-3 at 575K.
Create a primary function : create a primary function that uses a function handle with a nested function to compute the ninimum of the function 20x^2-200x+12 over the range 0
Determine the pressure head at the nozzle inlet to produce : determine the pressure head at the nozzle inlet to produce a water jet velocity of 40 ft/s. Neglect the friction loss and assume incompressible flow.
Determine the flow rate of the oil : Oil of a specific gravity of 0.75 is flowing through a 6-in pipe under a pressure of 15 psi. If the total energy relative to the datumplate is 8.0 ft below the center of the pipe is 58.6 ft, determine the flow rate of the oil.
Compute the equilibrium pressure of no : Calculate the equilibrium pressure of NO if 2.00 atm and 1.00 atm of O2 are initially placed in a 1.0L container at 440K and the final total pressure in the container
Calculate the forces exerted by the water on the bend : Water flows through a horizotal 45 deg reducing bend with a 36 inch. diameter upstream and a 24 inch diameter downstream, at the rate of 20 cfs under a pressure of 15 psi at the upstream end of the bend. Neglecting head loss in the bend, calculate..
Explain the photoelectron spectrum of n2 : write the MO configuration of N2^+ and terms symbol for the ground state and excited states. show the photoelectron spectrum of N2. Assign short and long progression band.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Elevation and stationing of the low point

A 1600 ft long sag verical curve (equal tangent) has a pvc at station 1200+00 and elevation o 1500 ft. the initial grade is -3.5% and the final grade is 6.5%. determine the elevation and stationing of the low point, pvi and pvt.

  Regenerative thermal oxidizers

A company that manufactures regenerative thermal oxidizers made an investment 10 years ago that is now worth $1,300,000.

  Rankine cycle and thermal efficiency

Determine the rate at which heat is added in the boiler, the power required to operate the pumps, the net power produced by the cycle, and the thermal efficiency.

  Explain roman technology and engineering

Roman technology and engineering. Technology and engineering were among Rome's most famous achievements. Describe and explain the importance of Roman technology and engineering

  Sufficient collapse strength

Would a 30 slot stainless steel screen (2.0 m long; located at the bottom of the well) have sufficient collapse strength for this application?

  Smallest standard commercial pipe

For satisfactory operation, the static pressure at the pump inlet must not be lower than -6 m of water gage. Determine the smallest standard commercial pipe that will give the required performance.

  Conduiting with a roughness coefficient

Given an 18-in. concrete conduit with a roughness coefficient of n = 0.013, s = 0.02, and a discharge capacity of 15 cfs, what diameter pipe is required to triple the capacity?

  Define base isolation technique has become the method

Base isolation technique has become the method of choice for structural design of buildings and bridges located in highly seismic areas in recent years.

  Required height of the roller coaster

Determine the required height h of the roller coaster so that when it is essentially at rest at the crest of the hill it will reach a speed v= 100km/hr when it comes to the bottom.

  Maximum tensile and compressive bending stresses

When P = 800 lb, A) Draw the shear and bending moment diagram along its length; B) Determine the maximum tensile and compressive bending stresses; and C) determine the maximum shear stress.

  Determine the theoretical discharge

A vertical triangular orifice in the wall of a reservoir has a base 0.9m long,0.6m below its vertex and 1.2 m below the water surface. Determine the theoretical discharge?

  Maximum rod diameter on lathe machine

If the tensil testing machine can apply no more than 925 lbs. of force to the specimen, calculate the maximum rod diameter that should be used. (precision 0.000)?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd