Determine the perpendicular distance d from the line to the

Assignment Help Civil Engineering
Reference no: EM13532288

1.In a constant-head permeability test, a sample of sand 12cm longand 8 cm in diameter discharged 1.5 X 10^-3 cubic meters of waterin 10 minutes. The head difference in two manometers A and Blocated at 10mm and 110mm, respectively, from the bottom of thesample is 20mm. Determine the hydraulic conductivity of thesand.

2.A line passes through the points (20m, 16m) and (-1m, -4m).  Determine the perpendicular distance d from the line to the origin O of the system of coordinates.

Reference no: EM13532288

Questions Cloud

Different forms of the same gene are referred : There are three different forms of RNA. Which is not one ofthese? Cattle that feed on grass occupy which trophic level? Different forms of the same gene are referred to as
Catabolic and anabolic modes : Many biochemcial pathways operate in both catabolic and anabolic modes.  Describe the benefits and costs (in other words, the good and the bad) for bacteria that operate these amphibolic pathways.
Determine the resultant of the four force sand its line of : Four forces act on a small airplane in flight: its weight (24kN), the thrust provided by the engine (10 kN), the lift providedby the wings (23 kN), and the drag resulting from its motionthrough the air (3 kN).
What is the elevation of point q : The slope distance and zenith angle measured from point P to pointQ were 1876.253m and 87.33'24 degrees, respectively. The instrumentand rod target heights were equal. If the elevation of point P is227.965m, above datum, what is the elevation of poin..
Determine the perpendicular distance d from the line to the : A line passes through the points (20m, 16m) and (-1m, -4m).  Determine the perpendicular distance d from the line to the origin O of the system of coordinates.
An observer fails to check the bubble and it is off two : A piston-cylinder device initially contains 1.4 kg saturatedliquid water at 200 C. Now heat is transferred to the water until the volume quadruples, and the cylinder contains saturatedvapor only.
Find the proper diameter pipe to the nearest : You are asked to design a pump station to conveywaste water at a flow rate of 250 cubic meters per hour to anequalization tank. A velocity of at least 3ft/s must be maintained in the pipe to prevent deposition and provide scouring of any previously d..
Determine the pressure rise in the tire when the air : The pressure in a tire depends on the temperature of the air in atire. When the air temp is 25 C, the pressure gage reads 210KPa. If the volume of the tire is 0.025 m3
Negate friction at the gate hinge and the pulley : A 1-m diameter cylindrical mass, M, is connected to a 2-m widerectangular gate. The gate is to open when the water level,h, drops below 2.5 m. Determine the required value forM. Negate friction at the gate hinge and the pulley.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Assist structural engineer for a bridge replacement project

You should provide the structural engineer with a formal typed report that will include all of your analyses and final size of the footing. You should also include all of your design assumptions in your report.

  What is classification of soil using of agriculture textural

What is the classification of the following soil using the united states department of agriculture textural classification chart

  Determine the acceleration of the first two drivers

Three stock car drivers are racing around a circular bend. They are each circling the bend at different radii: r(1)=249 m , r(2)=255 m , and r(3)=261 m . At a given instant, all three are traveling at the same transverse rate of rotation

  Moles of gas in the gas sample

A gas occupise 250 ml and it's pressure is 550mm Hg @ 254C how many moles of gas are in this sample? (convert mm Hg to atm).

  Determine the velocity of collar at point b for value of k

a 12-lb collar is attached to a spring anchored at point C and can slide on a friction-less rod forming a 30 degree angle with the vertical. The spring has constant k and is unstretched when the collar is at A.

  Estimate the amount of carbofuran remaining at the start of

nbspcarbofuran is applied to a corn field at planting time in order to control corn rootworm. the application rate is

  Determine the lightest w-shape to carry the load

A girder that carries a uniformly distributed dead load of 1.7 K/ft plus its self-weight and three concentrated live loads of 15 kips at quarter points of that 36 ft span is to be sized.

  Find all contact forces to the contacting surfaces

Cylinders A & B weigh 500N each and cylinder C weighs 1000N. Assuming frictionless contact between all surfaces, find all contact forces. Diameters A&B= 1, C=2. Frictionless contact means forces are normal to the contacting surfaces.

  Compute atomic packing factor for diamond cubic crystal

Assume that bonding atoms touch one another, that the angle between adjacent bonds is 109.5, and that each atom internal to the unit cell is positioned a/4 of the distance away from the two nearest cell faces.

  Determine volume required for trickling filtration treatment

For a flow of 2 MGD, an influent BOD of 200 mg/l, a depth of 8 feet, and a desired effluent BOD concentration of 20 mg/l, determine the volume required for trickling filtration treatment as predicted for single-stage treatment by using NRC equatio..

  Determine the required area of the members

The truss is to be constructed of members with equal cross-sectional areas and using a material with yield stress 700 MPa. The structure must be designed to support a mass (m) of 3400 kg with a factor of safety of 3.

  Determine the arrival rate assuming that it is unchanged

Determine the arrival rate assuming that it is unchanged over the duration of the observation period. An approach to a pretimed signal with a 60second cycle has nine vehicles in the queue at the beginning of the effective green.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd