Determine the percentage of the flow through the pipe

Assignment Help Civil Engineering
Reference no: EM13312297

A pipe network in the form of a cube is made with twelve identical pipes. Each pipe forms an edge of the cube. If the entire inflow and outflow occurs at two adjacent corners, determine the percentage of the flow which passes through the pipe connecting these two corners.

Reference no: EM13312297

Questions Cloud

How to determine the amount of heat loss by the system : A closed rigid tank contains 2kg of saturated water vapor initially at temperature of 433K. Heat transfer occurs from the system and the pressure drops to 150kPa. Determine the amount of heat loss by the system.
Compute magnitude of the load that is necessary to produce : A brass alloy has a yield strength of 280 MPa, a tensile strength of 390 MPa, and an elastic modulus of 105 GPa. A cylindrical specimen of this alloy 12.7 mm in diameter and 250 mm long is stressed in tension and found to elongate 7.6 mm.
Calculate the initial acceleration of the system : A 2.85 kg object is held in place on an inclined plane that makes an angle of 40 degrees with the horizontal. Calculate the initial acceleration of the system
Dependencies between tasks : Dependencies between tasks
Determine the percentage of the flow through the pipe : A pipe network in the form of a cube is made with twelve identical pipes. Each pipe forms an edge of the cube. If the entire inflow and outflow occurs at two adjacent corners, determine the percentage of the flow
Explain what is the total pressure of the gas in the flask : (NH4)2Cr2O7(s) ? N2(g) + 4 H2O(g) + Cr2O3(s) If 0.95 g of ammonium dichromate is used and the gases from this reaction are trapped in a 15.0 L flask at 23 °C, what is the total pressure of the gas in the flask. What are the partial pressures of N2..
Find the minimum rope tension required to get sled moving : A heavy sled is being pulled by two people. The coefficient of static friction between the sled and the ground is %u03BCs = 0.579, find the minimum rope tension required to get the sled moving
Calculate the distance upstream from the point of entry : A clean-earth channel, for which n=0.020, is 6m wide and lies on a slope of 0.005236. Water flows at 30m3/s through the channel and enters a reservoir. The water depth in the channel, just before the entry to reservoir, is 3m.
How much taxable income does nikki recognize : Nikki receives a 28 percent discount on jewelry restoration services offered by Shine Company. This year, Nikki had Shine Company repair a set of antique earrings (normal repair cost $600; discounted price $432.00).

Reviews

Write a Review

Civil Engineering Questions & Answers

  Calculating the ph of solution

A 1.50 L buffer solution is 0.250 M in HF and 0.250 M in NaF. Calculate the pH of the solution after the addition of 0.0500 moles of solid NaOH. Assume no volume change upon the addition of base. The Ka for HF is 3.5 x 10 -4 .

  Find the book value of the machine at the end of 2 years

At a local engineering firm, a supervisor thinks about buying a new copy machine for $700 but only wants to keep it for 3 years. Using the DDB find the book value of the machine at the end of 2 years.

  Supporting Investment Promotion: ERNST & YOUNG

Ernst & young is currently providing support to various sectors. In this regards it was felt that if this report is able to document good practices currently being adopted or planned in ceramic sector.

  What must be the standard deviation

A distance of 1000 feet is to be taped in a manner to ensure a standard deviation smaller than ±0.06 feet. What must be the standard deviation per 100-ft tape length to achieve the desired precision?

  Design a ssf constructed wetland and a tile drain for house

A family of six in a five bedroom house would like to treat their wastewater in an onsite septic system, constructed wetland, and tile drainage (leach field) system. They will be generating a maximum of 1.2 m3/d of septic tank effluent.

  Determine a distance between cross-sections

Route a trianglular hydrograph through a 100 foot wide rectangular channel with a bed slope of 0.015 and a Mannings n of 0.035. Tak a distance between cross-sections of 3000 ft.

  What is the pulling force to be applied for one of the plate

Due to temperature change, a 1/32" hole mismatching occurred. What is the pulling force, in lbs, to be applied for one of the plates to match the two holes The plate length is 3 ft (from the left end to the hole) and its cross section is 1/8" x 1"..

  Regenerative thermal oxidizers

A company that manufactures regenerative thermal oxidizers made an investment 10 years ago that is now worth $1,300,000.

  What is the direction and magnitude of the magnetic field

A proton feels a force of 2.0 micro-Newtons in the negative x-direction when it is moving in the positive y direction with a speed of 2.0 x 107 meters per second.

  Determine the common velocity just after the collision

The bus B has a weight of 15,000 lb and is traveling to the right at 5ft/s. Meanwhile a 3,000 lb car A is traveling at 4ft/s to the left. If the vehicles crash head-on and become entagled, determine their common velocity just after the collision.

  Determine the daily discharge of groundwater into the canal

A canal is constructed parallel to a river 600 m away both fully penetrating an unconfined aquifer of coarse sand and fine gravel as shown in the illustration below. The aquifer is subject to an average infiltration of 2.3 m/year

  What is conservation of linear momentum nd how is it related

Describe mathematically and explain the Principle of Linear Impulse and Momentum. What is Conservation of Linear Momentum and how is it related. What is the difference between Linear Momentum and Angular Momentum.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd