Determine the percentage of mass transfer resistance

Assignment Help Chemical Engineering
Reference no: EM131224580

Assignment - Mass Transfer and Absorptions

Q1. Water is used to absorb the vapor of methanol at 300 K and 101.325 kPa. The concentration of methanol in both gas and liquid phases are very low, with the equilibrium relation following Henry's Law. The known parameters are:

solubility of methanol in water = 1.995 kmol/(m3.kPa)

local mass transfer coefficient for gas film kG = 1.55E-5 kmol/(m2.s.kPa)

local mass transfer coefficient for liquid film kL = 2.08E-5kmol/(m2.s.kmol/m3)

(1) Please determine the overall mass transfer coefficient for gas phase, KG,

(2) And determine the percentage of mass transfer resistance in gas film out of the overall resistance.

(3) At steady operation in certain section of the absorption column, the partial pressure of methanol is 5 kPa and the liquid composition is 2.11 kmol/m3. Please determine the methanol absorption rate NA, [kmol/(m2.h)].

Q2. Water is used to absorb NH3 (mole fraction 0.1) from air at 1 atm in a counter current operation. The gas mixture at 313 K is fed to the bottom of the column at a flow rate of 0.556 m3/s and a velocity of 1.2 m/s. Water is introduced to the column from the top. Due to the enthalpy of dissolution, the temperature of the ammonium water is higher at the bottom of the column. The temperature and composition distribution in the liquid phase from top to bottom of the column, with corresponding gas phase equilibrium compositions are described by Table 1.

Table 1

temperature of NH3 solution

composition of NH3 solution

gas phase composition

deg C

X, kmol (NH3) / kmol (H2O)

 Y*, kmol (NH3) / kmol (air)

20

0

0

23.5

0.005

0.0056

26

0.01

0.01

29

0.015

0.018

31.5

0.02

0.027

34

0.025

0.04

36.5

0.03

0.054

39.5

0.035

0.074

42

0.04

0.097

44.5

0.045

0.125

47

0.05

0.156

(1) If the recovery of NH3 is 95%, assuming air is totally inert, please determine the theoretical minimum liquid flow rate Lmin, (kg/s).

(2) If the real liquid flow rate is 1.1 times of the theoretical minimum, and if the KGa is known to be 0.0556 kmol/(m3.s), please determine the diameter of the column, (m).

(3) Please determine the height of the packings (m), based on the above information.

Q3. Clean water is used to remove SO2 from air through a counter current scrubbing process to reach a 95% recovery, in which the flow rate of gas is 5000 std m3/h containing 10%(v/v) SO2. The equilibrium for the solute between gas and liquid is Y* = 26.7 X.

(1) Please determine the required liquid flow rate, assuming 1.5 fold of the theoretical minimum, (kmol/h).

(2) Please determine the number of theoretical plate.

(3) Using the number of plate determined from (2), if the recovery is to be increased from 95% to 98%, what will be the new water consumption (kmol/h)?

Reference no: EM131224580

Questions Cloud

What makes the person or organization stand out : There are leaders in every field of study and business around the world. Select a business leader you admire. Use your textbook, the Argosy University online library resources, and the Internet to select a leader and then to research the leader's ..
What about special pricing for some markets or customers : What about special pricing for some markets or customers? Show effect on revenues and profitability based on stated assumptions. Potential advantages and disadvantages, both financial and non-financial.
Calculate the income elasticity of demand : Calculate the income elasticity of demand for this good at the point from part d).  Is good X normal or inferior? Calculate the effect of a 3.5 percent decrease in income on the demand for good X (all other demand factors being held constant and pr..
Interaction in a tic-tac-toe game : Write a PhoneContact class that gets initialized with a phone number and a label. The phone number should follow one of the formats of the Phone class from the previous assignment (and you should use the Phone class in this assignment).
Determine the percentage of mass transfer resistance : ENSC3019 Assignment - Mass Transfer and Absorptions. Water is used to absorb the vapor of methanol at 300 K and 101.325 kPa. The concentration of methanol in both gas and liquid phases are very low, with the equilibrium relation following Henry's L..
Prepare an income statement and balance sheet : Formulating Financial Statements from Raw Data . -  Prepare an income statement, balance sheet, and statement of cash flows for General Mills, Inc.
What is a managerial accounting model : How can we reconcile the two statements? What is a managerial accounting model? Read the article and comment on some aspect of the discussion in an attempt to shed some light on this topic. What are your thoughts at this juncture?
Recruitment process and the selection process : What are the differences (if any) between the recruitment process and the selection process? In what ways are they interchangeable and dependent on each other?
Drafting memo for all employees that explains procedures : Blozis - You are the purchasing manager and will implement procedures for the company. You are drafting a memo for all employees that explains the procedures. For each of the following various purchasing forms and items, describe the procedures that ..

Reviews

Write a Review

Chemical Engineering Questions & Answers

  Find the voltage induced in the armature

find the voltage induced in the armature, given that the number of parallel paths is equal to the number of poles for lap windings.

  The overworked it resource person

Hello Skgupta. I have a last assignment in Operations Management. I am kindly asking for help. I have attached the problems in a word doc. I will also attach an Excel spreadsheet that will help with the problems. Thnak You! Problems* *Use spreadsh..

  Determine the final pressure and temperature in the tank

The ideal-gas heat capacities of ethylene and nitrogen are 43 J/mol K and 29 J/mol K, respectively, and may be assumed independent of temperature.

  What is the minimum diameter of the discharge line

An equimolar mixture of methane and propane is discharged from a compressor at 5500 kPa and 363.15 K (90°C) at the rate of 1.4 kg s-1.

  What is the optimum operating reaction temperature

For a reversible exothermic elementary catalytic reaction of the type A B, what is the optimum operating reaction temperature at a conversion level , xa = 0.8 given- K1 = exp ( 10 -5000/T) K2 = exp ( 40 - 15000 /T) and maximum allowable temperatu..

  What number of acidic hydrogens per molecule are there

What number of acidic hydrogens per molecule does citric acid have?

  Health care professionals use medical devices to diagnose

Discuss the possible individuals and/or organizations that may have been responsible for this injury.

  Calculate the quantity of pure make

1) Calculate the quantity of pure make up oxygen to be supplied, (in kg/h), in steady state operation.

  Describe the major technical areas

Describe the major technical areas involved in engineering a new biomaterial such as a contact lens. Are there differences with other biomaterial based products?

  Determine the location and the value of the point charge

Determine the location and the value of the point charge.

  Determine the size of control valve to use for normal design

Determine the size of control valve to use for a normal design flow rate of 0.2 m3 /h if the valve is sized with a pressure drop of 1.25 bar.

  What is the maximum profit obtainable per pound of chemical

Chemical X costs $0.09 per pound. Chemical Y costs $0.04 per pound. Chemical Z sells for $0.80 per pound. If one-half of the selling price for chemical Z is due to costs other than for raw materials, what is the maximum profit obtainable per pound..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd