Determine the load p if the total elongation of the system

Assignment Help Civil Engineering
Reference no: EM13300007

A 0.25 in diameter copper rod BC is securely attached between two identical 1 in diameter steel rods (AB and CD). Find the load P if the total elongation of the system is measured to be 0.0312 in. Esteel= 29,000ksi, Ecopper=17,000ksi.

Reference no: EM13300007

Questions Cloud

Determine the period of the wood pendulum : Two physical pendulums (not simple pendulums) are made from meter sticks that are suspended from the ceiling at one end. Determine the period of the wood pendulum
Determine the flow rate of water through the channel : The flow rate of water flowing in a 3m wide channel is to be measured with a sharp-crested triangular weir 0.5m above the channel bottom with a notch angle of 60°. If the flow depth upstream from the weir is 1.5m
How much time elapses before it attains its greatest speed : A simple pendulum is made from a 0.691-m-long string and a small ball attached to its free end. how much time elapses before it attains its greatest speed
Determine the maximum acceleration of the eardrum : When responding to sound, the human eardrum vibrates about its equilibrium position. What is the maximum acceleration of the eardrum
Determine the load p if the total elongation of the system : A 0.25 in diameter copper rod BC is securely attached between two identical 1 in diameter steel rods (AB and CD). Find the load P if the total elongation of the system is measured to be 0.0312 in. Esteel= 29,000ksi, Ecopper=17,000ksi.
How many stars are in the galaxy : The sun moves in an orbit about the center of the Milky Way Galaxy at a speed of 290 km/s with a radius of 3 x 1020 km. How many stars are in the galaxy
Social fairness is a virtuous quality : Since social fairness is a virtuous quality (and one of the pillars of this country’s founding), explain why America did not embrace the revolutionary social theories purported by Marx and Engels.
What is the liquidity premium on niendorf bonds : The maturity risk premium for all bonds is found with the formula MRP = (t - 1) x 0.1%, where t = number of years to maturity. What is the liquidity premium (LP) on Niendorf's bonds?
Determine the flow regime sub or super- critical downstream : determine the rate of discharge through the gate; b) determine the critical depth , yc at the minimum energy, Es,min; c) determine the critical depth, yc at the current flow; d) determine the alternate depth; e) determine the flow regime (sub- or ..

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine pressure drop in length assuming laminar flow

Under these conditions flow is expected to be turbulent, but for a clean air, very smooth enterance (with guided vanes) to the tube and no tube vibration, it may be possible to maintain laminar flow.

  What is the internal rate of return used to reach decision

The cost to build the motel is estimated at  $8,000,000; Value Lodges estimates furnishings for the motel will cost an additional $700,000 and will require replacement every 5 years.  Annual operating and maintenance costs for the motel are estima..

  Design the thinnest possible slab allowed by the aci code

Design a simply supported one-way reinforced concrete floor slab to span 10 ft and carry a service live load of 175 psf and a service dead load of 25 psf. Use fc' = 3000 psi and fy = 60,000 psi. Make the slab thickness to ½-in. increments.

  What is the new water content

A soil sample with a water content of 14.5% and unit weight of 128.2 lb/cu. ft. was dried to a unit weight of 118.8 lb/cu. ft. without changing its void ratio. What is its new water content (in %)?

  What is the maximum acceleration from rest

The base engine develops 200 ft-lb of torque, and a modified version of the engine develops 240 ft-lb of torque. If the overall gear reduction ratio is 8 to 1, what is the maximum acceleration from rest (in ft/sec^2) for.

  Determine the length of the hydraulic jump and energy loss

A spillway carries a discharge of 22.5 m^3/sec with the outlet velocity of 15 m/sec at a depth of 0.2m. Select an adequate USBR stilling basin and determine the sequent depth, the length of the hydraulic jump and energy loss.

  Determine the factors of safety against sliding

assume hydrostatic uplift varies uniformly from full hydrostatic head at the heel of the dam to zero at the toe. consider 1m length of dam.

  Compaction degree by freezing

We would continue embankment work even if winter season and my question is what is swelling amount of compacted soil for 30cm thickness and 95% compaction degree by freezing.

  Determine diameter of glass tubing for the capillary rise

Determine the diameter of glass tubing that is necessary for the capillary rise to be less than 0.5 mm. Assume the fluid is water with surface tension equal to 0.0728 N/m and specific weight equal to 9800 N/m3

  Parabolic trajectory of the falling prey

A hawk flying at 2 m/s at an altitude of 45 m accidentally drops its prey. The parabolic trajectory of the falling prey is described by the equation below until it hits the ground, where y is its height above the ground and x is its horizontal dis..

  Determine what is the total resistance of a wheel tractor

a wheel tractor scraper weighing 100 tons is being operated on a haul road which is a rutted dirt roadway (little maintanence) this tractor is traveling empty down a 5% slope. what is the total resistance

  Partial wavelength for electromagnetic energy

What is the length of the partial wavelength for electromagnetic energy with a frequency of 15 MHz and a phase shift of 263 degrees (in meters)?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd