Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
Water is released from a 14m deep reservoir into a 5m wide open channel through a sluice gate with a 1m high opening at the channel bottom. If the flow depth downstream from the gate is measured to be 3m, a) determine the rate of discharge through the gate; b) determine the critical depth , yc at the minimum energy, Es,min; c) determine the critical depth, yc at the current flow; d) determine the alternate depth; e) determine the flow regime (sub- or super- critical) downstream.
What is the minimum distance from the stalled car at which the driver could apply the brakes and still stop before hitting it? Assume coefficient of rolling resistance of 0.013.
The pipe contains two 6 in steel elbows, two fully open gate valves, a fully open 90o angle valve, and a swing check valve. If the discharge end of the pipe is located 20 ft higher than the entrance, what is the pressure difference between the two..
A 4000-m 3 /day conventional activated sludge plant has an influent with a BOD5 of 190 mg/L and SS of 225 mg/L. What population would this plant serve?
(a) At what angle did the player have to shoot the cue ball so that the eight ball entered the pocket at C? (b) In what direction did the cue ball move after the collision? (c) What percentage of its kinetic energy did the cue ball impart to the e..
Design the ramp for the highest design speed (to the nearest 5 mph) without exceeding a minimum D of 8.0. (Assume the PC of the horizontal curve is at station 15+00, and the vertical curve PVIs are at the PC and PT of the horizontal curve). Maximu..
A driver is travelling at 50 mi/h on a wet road. An object is spotted on the road 500 ft ahead and the driver is able to come to a complete stop just before hitting the object.
A 45-cm-thick, 300-cm-high lightweight concrete masonry unit wall lies on a 20-cm-thick lightweight plain concrete slab. The 20-cm wide slab is supported by a reinforced concrete beam, which is placed on top of two columns (simply supported beam).
A consolidated-drained triaxial shear test on a normally consolidated clay yielded a drained friction angle of 28 degrees. If the confining pressure during the test was 15 psi, what was the major principal stress at failure.
Give one possible characteristic or property of sanstone and of the quartzite that made you decide not to select it for your concrete project?
Long Line: the slope distance and zenith angle measured from point a to point b were 17,685.20 ftand 93degrees 13' 46" . The instrument and reflector heights were equal. If the elevation of the point A is 1854.43 ft above the MSL Datum
A pipeline terminates in a nozzle of outlet diameter = 0.15 m. The free jet from the nozzle is deflected through 120º by a vane as shown. Water flow rate through this pipe is 0.25 m3/s. Ignoring friction, find the force exerted by the jet on ..
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd