Determine the length of the channel for the n

Assignment Help Civil Engineering
Reference no: EM13298713

A trapezoidal channel of bottom width 25ft and side slope 1:2.5 carries a discharge of 450cfs with a normal depth of 3.5 ft. The elevations at the beginning and end of the channel are 685 and 650 ft, respectively. Determine the length of the channel if n=0.02.

Reference no: EM13298713

Questions Cloud

Determine how many combinations of 2 books can be selected : A customer randomly select 2 of 10 books to purchase. How many combinations of 2 books can be selected
How to calculate the value of w work for the system : Automobile airbags contain solid sodium azide, NaN3, that reacts to produce nitrogen gas when heated, thus inflating the bag. 2NaN3(s) ------> 2Na(s) + 3N2(g) Calculate the value of w (work) for the following system if 14.7 g of NaN3 reacts comple..
What is the finished grade elevation on the curve at station : A sag vertical curve along an existing vertical alignment begins at station 23+45 and ends at station 30+25. The initial grade coming into the curve is -2% and the grade out is +5%. What is the finished grade elevation on the curve at station
Compute the dealer expected carry income : The dealer can currently borrow $ 2,000 million through one- week repurchase agreements at an interest rate of 1.20 percent. Compute the dealer's expected carry income in each of the following scenarios. ( Hint: A spreadsheet can be most useful he..
Determine the length of the channel for the n : A trapezoidal channel of bottom width 25ft and side slope 1:2.5 carries a discharge of 450cfs with a normal depth of 3.5 ft. The elevations at the beginning and end of the channel are 685 and 650 ft, respectively.
Explain a buffer is prepared by adding sodium acetate : A buffer is prepared by adding 21.0g of sodium acetate ({\rm CH_3 COONa}) to 520mL of a 0.140M acetic acid ({\rm CH_3 COOH}) solution.
Find the magnetic field strength in the center of the tank : In one such test, 150 turns of wire were wrapped around a 7.0-m-diameter cylindrical shark tank. find the magnetic field strength in the center of the tank
Formulate a linear programming model : Formulate a linear programming model that can be used to determine the percentage that should be allocated to each of the possible investment alternatives.
Determine the specifc energy of water in the channel : A rectangular channel is 25ft wide and has a flow of 500 cfs at a velocity of 5ft/s. (a) Determine the specifc energy of water in the channel. (b) What is the criticl depth of water in the channel (c) What is the critical velocity

Reviews

Write a Review

Civil Engineering Questions & Answers

  What is the elevation of lower point

A pre- engineering base line was run down a very steep hill.rather than measure horizontaily down hill with steel tape: surveyor measured the vertical angle with the theodolite and slope distance with 16m steel tape.

  Explain why the compressive strength of wood loaded

EXPLAIN BRIEFLY WHY THE COMPRESSIVE STRENGTH OF WOOD LOADED "PARALLEL" TO ITS GRAIN IS HIGHER THAN THE COMPRESSIVE STREGTH OF THE SAME WOOD LOADED "PERPENDICULAR" TO THE GRAIN

  Claculate the magnitude and direction of the resultant force

the structure has a curved face being part of a circle with radius R = 32M. The dam holds water to a height = 28 m. Claculate the magnitude and direction of the resultant force per metre length of the dam wall

  Find the resultant force from all fluids acting on the gate

a tank is filled with oil (specific gravity 0.8) and water to a depth of 10 meter and 6 meter respectively. Find the resultant force from all fluids acting on the gate of 1.8 meter by 9 meter.

  Calculating energy for vacancy formation

The number of vacancies in some hypothetical metal increases by a factor of 4 when the temperature is increased from 1090 K to 1140 K. Calculate the energy (in J/mol) for vacancy formation assuming that the density of the metal remains the same ov..

  Determining stress fort rigid bar of negligible weight

The rigid bar of negligible weight is supported as shown. Find the stress in each rod if the temperature rises DeltaT after a load P is applied. Use the following data: area of steal rod 320mm2, bronze rod 1300mm2, thermal expansion coefficient Al..

  Calculate the maximum bending stress

a round steel rod, 25 mm in diameter, subjected to a bending moment of 160 Nxm. calculate the maximum bending stress.

  Explain metallurgical balance in mineral processing

Metallurgical balance in mineral processing, Assume 2000 short tons of ore were mined, 200 tones were rejected as waste and the tonnage accepted for metallurgical treatment

  What is the draft h of the barge when floating in sea water

A barge has the trapeziodal shape and is 22 m long into the paper. If the total weight of barge and cargo is 350 tons, what is the draft H of the barge when floating in sea water

  Find the capacity of the main channel and the lateral extent

Field tests have shown that the Horton equation best describes the composite roughness of the channel. Find the capacity of the main channel and the lateral extent of the floodplains for a 100-year flow of 1590m^3/s.

  Determine the settlements having stress

The soil properties of the clay are Cc = 0.25, Cr = 0.05, gsat = 18 kN/m 3 , for the sand gsat = 18 kN/m 3 , and the water table is 2 m below the soil surface. Determine the settlements when a stress of 100 kPa is applied by the building over an a..

  Determining the dry volume

A saturated sample of clay with an sl 20 has a natural water content of 32%. What would its dry volume be as a percentage of its original volume of Gs.= 2.67.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd