Determine the emissions of heat-trapping carbon dioxide

Assignment Help Civil Engineering
Reference no: EM13298907

Emissions of heat-trapping carbon dioxide (CO2) reached an all-time high of 31.6 gigatons in 2011, a 3.2% increase over 2010. The International Energy Agency said this further reduces the chance that the world can avoid a dangerous rise in global increase temperature by 2020.

If the discharge increase continues at the same 3.2% rate per year for the next 9 years, how many gigatons will be release in 2020?
What will be the total percent increase between 2011 and 2020?

Reference no: EM13298907

Questions Cloud

Determine slenderness ratio l per r and euler buckling load : An aluminum alloy tube with an outside diameter of 2.9 in. and a wall thickness of 0.32 in. is used as a 19-ft-long column. Assume that E = 8300 ksi and that pinned connections are used at each end of the column.
What are the internal forces and moment at point a : Consider the two loading scenarios on the beam, where the beam is supported by a pin joint on the left and roller joint at the right end. What are the internal forces and moment at point A for each scenario
How many u.s. dollars will you need in one year : Today, you purchase a one year forward contract in Australian dollars. How many U.S. dollars will you need in one year to fulfill you forward contract?
Should the company proceed with the new project : The CCA rate on fixtures and equipment is 30%. The companys tax rate is 40% and its cost of capital is 12%. Should the company proceed with the new project?
Determine the emissions of heat-trapping carbon dioxide : Emissions of heat-trapping carbon dioxide (CO2) reached an all-time high of 31.6 gigatons in 2011, a 3.2% increase over 2010. The International Energy Agency said this further reduces the chance that the world can avoid a dangerous rise
At what level of pretax cost savings would be indifferent : At what level of pretax cost savings would you be indifferent between accepting the project and not accepting it?
Calculate the moment of inertia of the hollow sphere : A hollow sphere of mass 1000kg and radius 25cm is rolling down an incline plane, making a beta angle horiozntally 30degrees. calculate the moment of inertia of the hollow sphere
Explain what are the subscripts of c, h, o : A compound is 40% C 6.70% H and 53.3% O by mass. the molecular formula of this compound is 60 amu, what are the subscripts of C, H, O
What kind of wastewater treatment facility : Find out what aspects of water management your water department is currently working with and what kind of wastewater treatment facility do you have? How does it work?

Reviews

Write a Review

Civil Engineering Questions & Answers

  What diameter is required if the concrete pipe is to carry

A ciricular sewer is laid on a slope of 0.5%. What diameter is required if the concrete pipe is to carry 25 cfs If the desired design mean suction velocity is between 3 and 7 ft/s, is the design acceptable

  Plot the data as a graph on log log paper showing the volume

The volume of a sphere is V=4/3pir^3. Prepare a table of volume versus radius which allows the radius to vary from 2.0 to 10.0 cm in 1 cm increments. Plot the data as a graph on log log paper showing the volume to radius relation

  Determine the volume flow rate of water

Water with a static pressure of 1.96kN/M 2 flows through an 800 mm diameter pipe. A pitot tube pressure gage in this pipe reads a pressure of 5.88 kN/M 2 . How do you determine the volume flow rate (Q) of the water? (Q = 1.40 M^3/sec, V=2.79 M/se..

  Explain what is the cost breakdown structure

What is the cost breakdown structure(CBS)? What are its purposes? What is included (or excluded)? How does it relate to a work breakdown structure (WBS)?

  Explain indicated concentrations of total volatile solids

Influent sample collected from a wastewater treatment plant was analyzed for various solids concentrations. Results indicated concentrations of Total Volatile Solids (TVS)

  Replace the two couples with a single equivalent couple

The two shafts in a speed-reducer unit are subjected to couples of magnitude M1 = 18 N · m and M2 = 7.5 N · m, respectively. Replace the two couples with a single equivalent couple, specifying its magnitude and the direction of its axis.

  Horizontal and vertical component from this acting force

What would be the Horizontal and vertical component from this acting force see diagram

  Design the ramp for the highest design speed

Design the ramp for the highest design speed (to the nearest 5 mph) without exceeding a minimum D of 8.0. (Assume the PC of the horizontal curve is at station 15+00, and the vertical curve PVIs are at the PC and PT of the horizontal curve). Maximu..

  Calculate the depreciation expense of the equipment

At the end of year 1 the piece of equipment is worth $15,000 and at the end of year 2 $13,000, and at the end of the third and final year the salvage value is equal to $9,000.Applying the straight line depreciation, calculate the depreciation expe..

  Depict a decision tree

The mine's operating costs were projected at $900,000 per year including $400,000 of fixed costs and $500,000 of variable costs. Ms. Peru thought these forecasts accurate.

  Calculate the forces exerted by the water on the bend

Water flows through a horizotal 45 deg reducing bend with a 36 inch. diameter upstream and a 24 inch diameter downstream, at the rate of 20 cfs under a pressure of 15 psi at the upstream end of the bend. Neglecting head loss in the bend, calculate..

  Find the maximum area that the rancher can enclose

A rancher has 1200 ft of fencing to enclose a double paddock with two rectangular regions of equal areas. find the maximum area that the rancher can enclose.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd