Determine the density and pressure in cgs absolute units

Assignment Help Civil Engineering
Reference no: EM13319119

A certain gas has a molecular mass of 40. It is under a pressure of 2.5atm and a temperatature of 25 Degree Celsius. Determine its density and pressure in CGS absolute units.

Reference no: EM13319119

Questions Cloud

Determine the minimum required diameter for the machine : Determine the minimum required diameter for this machine member based on direct, compressive stress. The member is to be made of gray cast iron. Use a factor of safety of 6.0 against compression failure.
The relationship between the inflation rate and changes : Classify the following topics as relating to microeconomics or macroeconomics. a family’s decision about how much income to save. the effect of government regulations on auto emissions
Determine the liquid density in british gravitational units : It is commonly known that there are 16 ounces in 1 lb. Consider a 0.5lbf glass that weighs 1 lbf when filled with 8 ounces of liquid. Determine the liquid density in British gravitational units and in SI units.
Calculate and plot using a spreadsheet : Calculate and Plot using a spreadsheet the series for Real GDP and calculate and Plot using a spreadsheet the yearly % changes in Nominal GDP (i.e. [GDPt+1-GDPt]/GDPt)
Determine the density and pressure in cgs absolute units : A certain gas has a molecular mass of 40. It is under a pressure of 2.5atm and a temperatature of 25 Degree Celsius. Determine its density and pressure in CGS absolute units.
Explain what is the equilibrium concentraction of h30+ : The equilibrium contant Kc for the reaction HF(aq)+H20(l)-->H30+(aq)+F-(aq) is 3.5x10^-4. What is the equilibrium concentraction of H30+ if the initial concentration of HF is 1.0M
What is the opportunity cost of spending the $100 now : You win $100 in a basketball pool. You have a choice between spending the money now or putting it away for a year in a bank account that pays 5 percent interest.What is the opportunity cost of spending the $100 now?
Discuss the sticky-wage model of aggregate supply : Discuss the sticky-wage model of aggregate supply, carefully identifying any assumptions made. How well does the sticky-wage model explain the observed behaviour of real wages over the business cycle?
Determine the modulus of elasticity and the poissons ratio : Under this load the bar elastically deforms so that the gae length increases to 2.007 in. and the cross section decreases to 0.599x0.599 in. Determine the modulus of elasticity and the poisson's ratio for this metal.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine by direct integration the polar moment of inertia

a) determine by direct integration the polar moment of inertia of the semiannular area shown with respect to point O b) Using the result of part a, determine the moments of inertia of the given area with respect to the x and y axes

  What is the tension in the line to the bottom of the tank

An object is submerged in a water tank and tethered by a line to the bottom of the tank. If the object has a density of 45 kg/cubic meter and a volume of 2.5 cubic meters, what is the tension in the line

  Define what must the drivers eye height in the van be

A civil engineering student contends that 60 mph is safe in a van because of the higher driver's eye height. If all other design inputs are standard, what must the driver's eye height in the van be for the student's claim to be valid

  Determine largest positive value p the structure can support

The structure consists of two uniform members AB and BC, each weight 2kN. The member are pinned to each other at B, and the structure is supported by a pin at C and a surface at A having coefficient of static friction 1.2.

  Required height of the roller coaster

Determine the required height h of the roller coaster so that when it is essentially at rest at the crest of the hill it will reach a speed v= 100km/hr when it comes to the bottom.

  Find the normal sress and deformation in the wire

a 10.0 inch long 10-guage wire of yellow brass (E=105 GPa) is subjected to an axial tensile force of 400 lbs. Find the normal sress and deformation in the wire. A 10-guage wire has a diameter of 2.588 mm.

  What is probability that more than people will participate

Suppose 500 people are approched outside of a grocery store to answer some survey questions. If each person decides independently whether or not to participate, and each has a probability of 0.1 of participating

  Determine the outlet area and velocity to compress helium

A steady-flow compressor is used to compress helium from 15 psia and 70oF at the inlet to 200 psia and 600oF at the outlet. The outlet area and velocity are 0.01 ft2 and 10 ft/s

  Determine what is the modulus of rupture of wood

A flexure test is done to determine the modulus of rupture of wood. Given that a=15in, L=34in, and the maximum load P that was applied was 5950lbf, what is the modulus of rupture of wood

  What is the highest possible design speed for the curve

design a horizontal curve for a two lane road. The road has 12 ft. lanes. Due to expensive excavation, it was determined that a maximum of 34 ft. can be cleared from the roads centerline towards the inside lane to provide for stopping sight distan..

  Determine the dimensions of the best cross section

Water is to be transported at a rate of 60,000 gallons/min in uniform flow in an open channel whose surface are lined with clay tile. The bottom slope is 0.0014. Determine the dimensions of the best cross section

  Compare and contrast the formula resulting from each theory

If given a brittle material with a known tensile strength, Sut, and a known compressive strength, Suc, use the four main fracture criteria (MNSC, BCM, MM, and MIIM) to determine the shear stress, tau, in terms of the material properties Sut and Su..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd