Determine the controlling ct factor at the water temperature

Assignment Help Civil Engineering
Reference no: EM13310412

A small city is evaluating disinfection requirements for their drinking water plant. With an average flow of 5 MGD and a peak flow of 9 MGD, determine the controlling CT factor (virus or giardia) when the water temperature is 23 degrees C. Typical pH during treatment is 7.75. In addition to comparing and determining controlling CT, compare sizes of clearwell(s) needed for achieving compliance WITH partial credit for turbidity removal and WITHOUT partial credit. Finally, look at the required volume of clearwell needed to comply during peak flow - assuming chlorine residual of 1.2 mg/L and average baffling in the clearwell. Assess the volume required if the baffling is superior.

Reference no: EM13310412

Questions Cloud

What is the orentation angle in the proper frame : a moving rod is observed to have a lenght of 2m and to be oriented at an angle of 30 degrees with respect to the direction of motion. what is the orentation angle in the proper frame
What is the probability that they will not be in violation : What is the probability that Medco Construction will be in violation of their construction contract and what is the probability that they will not be in violation?
Determine length of the cable between the pulleys a and b : Cylinders C and D are attached to the end of the cable. if D has a mass of 600 kg, determine the required mass of C, the maximum sag h of the cable, and the length of the cable between the pulleys A and B.
Evaluate the magnitude of the charges : Two equal, but oppositely charged particles are attracted to each other electrically. evaluate the magnitude of the charges
Determine the controlling ct factor at the water temperature : A small city is evaluating disinfection requirements for their drinking water plant. With an average flow of 5 MGD and a peak flow of 9 MGD, determine the controlling CT factor (virus or giardia) when the water temperature is 23 degrees C.
Create a work breakdown structure code for each task : Use at least one (1) quality resource in this assignment. Note: Wikipedia and similar Websites do not qualify as quality resources.
What is the maimum speed of the ejected electrons : when a photoelectric surface is illuminated with f 437 nm , the stopping potential 1.67 v, what is the maimum speed of the ejected electrons
What is the bright fringe separation : a double-slit arrangment prduce bright interference fringrs that are seprated by 2.60 mm when the wavelengt is 589nm. what is the bright fringe separation
Units of elephants produced sold for $2,000 per unit and the : Country A produces two goods, elephants and saddles. In the year 2006, the 10 units of elephants produced sold for $2,000 per unit and the 25 units of saddles produced sold for $200 per unit.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Find how much existing highway must be reconstructed

The overpass structure is to be level, centered 26 feet above the railroad, and 180 feet long. How much existing highway (in feet) must be reconstructed to provide appropriate vertical alignment

  What diameter is required if the concrete is to carry 25 cfs

A circular sewer is laid on a slope of 0.5%. What diameter is required if the concrete is to carry 25 cfs. If the desired design mean section velocity is between 3 and 7 feet per second, is the design acceptable

  What supported in the weak direction at the one-third points

The member is 24ft long with pinned end supports and is laterally supported in the weak direction at the one-third points of the total column length. Use 50 ksi steel.

  Estimate the hourly so2 and particle emissions

what type of SO2 removal device before (in front of) or after (following) the particle collector would you use?

  By what percentage is the capacity of the flume reduced

determine the width of the flume to be used such that the depth of flow immediatly upstream of the throat under design conditions is 1 m. By what percentage is the capacity of the flume reduced if the downstream depth is 0.85m

  Perception-reaction time on a roadway

An engineering student is driving on a level roadway and sees a construction sign 180 m ahead in the middle of the roadway. The student strikes the sign at 56 kph. If the student was traveling at 90 kph when the sign was first spotted, what was th..

  What is the steady-state concentration

If both tanks are well-mixed and remain at constant volume, what is the steady-state concentration (in mg/L) of chromate (CrO42-) in the effluent water leaving the second tank?

  Determine was driver exceeding the speed limit at time zero

A car is traveling along a road at a uniform velocity when at time zero the driver recognizes a hazard. At a moment 0.8 seconds later the driver brakes her vehicle , resulting in her vehicle sliding 90 ft in the same direction

  Determine what is the uncertainty in meters in the distance

A laser range finder consists of a laser and a light receiver. It operates by bouncing a laser pulse off a mirror and measuring the time of flight, the time it takes for the pulse to leave the laser, bounce off the mirror and return to the receive..

  What power must pump supply to system to pump the oil

What power must the pump supply to the system to pump the oil from the lower reservoir to the upper reservoir at a rate 0.20 m^3/s. Sketch the HGL and the EGL for the system.

  Calculate the maximum tensile load in n

Consider a cold worked C11000 copper alloy rod 21 mm in diameter and 250 mm in length. Calculate (a) the maximum tensile load, in N, and (b) the maximum length, in mm, to which the rod may be stretched without plastic deformation.

  What is the range of the values that would be expected

a spot speed study was conducted on a freeway on which the mean speed and the standard deviation were found to be 72 .4 mi/hr and 5.4 mi/hr, respectively. what is the range of the values that would be expected to contain the middle 95 percent of s..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd