Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
Cylinders C and D are attached to the end of the cable. if D has a mass of 600 kg, determine the required mass of C, the maximum sag h of the cable, and the length of the cable between the pulleys A and B. The Beam has a mass per unit length of 50 kg/m.
The superelevation rate is 0.084. Prepare a plot showing the ordinates required for the transition from the tangent section to the full superelevated section, assuming that the pavement width is 7.3 m wide. Make any necessary assumptions.
A stream of Refrigerant-134a at 1 MPa and 12 C is mixed with another stream at 1 MPa and 60 C. If the mass flow rate of the cold stream is twice that of the hot one, determine the specific volume of the exit stream.
A constant pressure container is filled with 1 kg of stainless steel and 0.5 kg of PVC (polyvinyl chlo- ride) both at 20C and 0.25 kg of hot air at 500 K, 100 kPa. The container is now left alone with no external heat transfer.
Water is flowing in a horizontal 200-mm diameter pipe at a rate of 0.05 m^3/s, and the pressures at sections 80 m apart are equal to 500 kPa at the upstream section and 400 kPa at the downstream section.
The treated wastewater has a BOD of 12 mg/L and a k of 0.0338 1/d. The Broad River has a flow rate of 0.43 m3/s and an ultimate BOD of 5.0 mg/L.
Steam at 100 psia, sat vapor is in a pipe. The pipe is schedule 40 steel with a wall thickness of 1/8 inch and a length of 100 ft. The outside air temperature is 40 degrees Fahrenheit. The mass flow of steam is 4,000 lb/hr.
we have the I-section made of steel (E = 29,000 ksi) which is to be used as a column, pinned at the top, and fixed at the base. Bracing is to be added in the direction of the weak buckling axis, at an unknown height, H.
The rod has a uniform cross-section of 53mm2. The external load consists of point loads: two P1 of 3kN, two P2 of 1kN, and one P3 of 7kN. What is the normal stress at the fixed support
How much must he set aside in his savings to account for the 3-months summer to cover his rent for next year. The savings account earns 3% with monthly compounding.
determine the highest real root of f(x)= 0.95x^3 - 5.9x^2 +10.9x-6: (a)graphically. (b) using the newton raphson method(three iterations, xi= 3.5). (c) using the secant method(three iterations, xi-1= 2.5 and xi= 3.5).
When a particle falls through the air, its initial acceleration a=g diminishes until it is zero, and thereafter it falls at a constant or terminal velocity v_f . If this variation of the acceleration can be expressed as a=(g/v^2_f)(v^2_f-v^2)
A Chemical manufacturer emits air with 250 PPM of toluene at 1 atm and 30 degrees C at a flow rate of 10,000 cubic meters per minute.The air is routed to a biofilter to control total emissions to less than 110 kg/day of toluene.
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd