Determine the amount of water supplied to the tank

Assignment Help Civil Engineering
Reference no: EM131033124

An un-insulated tank having a volume of 0.5 m3 contains air at 35°C, 130 kPa, and 20 percent relative humidity. The tank is connected to a water supply line in which water flows at 50°C. Water is sprayed into the tank until the relative humidity of the air-vapor mixture is 90 percent. Determine the amount of water supplied to the tank, in kg, the final pressure of the air-vapor mixture in the tank, in kPa, and the heat transfer required during the process to maintain the air- vapor mixture in the tank at 35°C.

Reference no: EM131033124

Questions Cloud

The north and the problem of slavery - books appeal : What historical changes in the United States explain the book's remarkable appeal? And what arguments and scenes did Stowe use in her book to exploit these changes?
Is this a reasonable claim : A cooling tower with a cooling capacity of 100 tons (440 kW) is claimed to evaporate 15,800 kg of water per day. Is this a reasonable claim?
Determine how much money would be saved per year : Assuming the average cooling season to be 120 days and the cost of oil to be $20/barrel, determine how much money would be saved per year.
How much the heating costs of a house can be reduced : determine how much the heating costs of a house can be reduced by wearing heavy sweaters if the annual heating cost of the house is $600.
Determine the amount of water supplied to the tank : Determine the amount of water supplied to the tank, in kg, the final pressure of the air-vapor mixture in the tank, in kPa, and the heat transfer required during the process to maintain the air- vapor mixture in the tank at 35°C.
How much water will be condensed from the atmospheric air : Atmospheric air enters an air-conditioning system at 30°C and 70 percent relative humidity with a volume flow rate of 4 m3 /min and is cooled to 20°C and 20 percent relative humidity at a pressure of 1 atm.
How play can be integrated into the classroom to address : Create a position statement on the benefits of play which is well-supported by theories of play and specifically explains how play can be integrated into the classroom to address necessary skill development.
Determine the mass flow rate of the required makeup water : A natural-draft cooling tower is to remove 50 MW of waste heat from the cooling water that enters the tower at 42°C and leaves at 27°C.
What is the name given to muslim iberia : Many poor nomads rejected the lifestyles of villagers and townspeople because - What is the name given to Muslim Iberia?

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the maximum constant speed of the motorcyclist

A motorcyclist travels around a curved path that has a radius of 200 . While traveling around the curved path, the motorcyclist increases speed by 1.25 . If the motorcyclist starts from rest, determine the time needed to reach an acceleration of 5...

  What is the difference among cement plaster

If the tangents intersect at an angle of 40 degrees, what is the highest degree of curve that can be used?..how to solve this problem using chord basis formula?

  What would be the retention time in each tank

A water treatment plant has 6 settling tanks that operate in parallel (the flow gets split into six equal flow streams), and each tank has a volume of 600 m3. If the flow to the plant is 10 MGD, what is the retention time

  Principal stresses and the orientation of planes

A direct shear test is performed on a saturated specimen of loose sand. A normal stress equal to 100 kPa is applied and a maximum shear stress of 75 kPa is measured in the shear test. Determine the principal stresses and the orientation of these p..

  What is elevation of b by neglecting curvature and reaction

The line of sight of a level falls at a rate if 0.122ft/ 100 ft when the level bubble is centered. A backsight of 4.782 is taken on point A, which is at 75 ft from the level. the elevation of a is 425.238 ft.

  Find the change in depth and in absolute water level produce

Find the change in depth and in absolute water level produced by a) a smooth upward step of 1 ft b) a smooth donward step of 1 ft, in the channel bed c) find the maximum allowable size of thw upstream flow to be a possible as specified

  What is the elevation of point b

You must establish the elevation of point B from point A (elevation 216.612 m). A and B are on opposite sides of a 12 lane highway. Reciprocal leveling is used with the following results: Station BS HI FS Elevation BM 130 0.702 188.567

  What is the steady-state concentration

If both tanks are well-mixed and remain at constant volume, what is the steady-state concentration (in mg/L) of chromate (CrO42-) in the effluent water leaving the second tank?

  Calculate the weight percent proeutectoid cementite present

A 1.10% Carbon hypoeutectoid plain carbon steel is slowly cooled from 900 degrees C to just slighty below 723 degrees C calculate the weight percent proeutectoid cementite present in this steel.

  Describe the reasons for enhancing drainage and situation

Describe the reasons for enhancing drainage and situation where it is required. Explain some of the detrimental effects of drainage. Describe the types of drainage system indicating suitability criteria. 200- 250 word limit

  Why should the direction of access ramps be sloping down

In designing of access ramps for drainage channels, why should the direction of access ramps be sloping down towards downstream?

  Compute the following assuming hl93 loading is the live load

Compute the following assuming HL93 loading is the live load.Draw loading diagrams so I can see the placement of your loads forALL cases considered.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd