Determine soils angle of internal friction under pressure

Reference no: EM13317744

A triaxial test was performed on a dry, cohesionless soil under confining pressure of 144 kN/m^2. If the sample failed when the deviator stress reached 395.8 kN/m^2, determine the soil's angle of internal friction.

Reference no: EM13317744

Questions Cloud

What is the solids concentration of primary clarifier sludge : a 20 mgd wastewater treatment plants primary clarifier influent has 800 mg/l solids. the clarifier removes 18 percent of the solids. the sludge flow rate is 0.070 MGD. (a) what is the solids concentration of primary clarifier sludge

Determine what is the euac for each option : Sacramento Cab Company owns several taxis that were purchased for $25,000 each 4 years ago. The cabs' current market value is $12,000 each, and if they are kept for another 6 years they can be sold for $2000 per cab.

Find the minimum euac for machine and its economic life : A machine has an initial cost of $10,000. Its market value declines by 20% annually. The repair costs are covered by a warranty in year 1, and then they increase $600 per year. The firm's MARR is 15%.

What is the optimal life of the forklift in years : Due to the intended service use, the forklift's market value drops 20% of its prior year's value in Years 1 and 2 and then declines by 15% until Year 10 when it will have a scrap/market value of $1000.

Determine soils angle of internal friction under pressure : A triaxial test was performed on a dry, cohesionless soil under confining pressure of 144 kN/m^2. If the sample failed when the deviator stress reached 395.8 kN/m^2, determine the soil's angle of internal friction.

Find the angle through which the part rotates : A machine part rotates at an angular speed of 0.56 rad/s; its speed is then increased to 3.46 rad/s using an angular acceleration of 0.44 rad/s2, Find the angle through which the part rotates

What is the maximum value of the house : What could you do to immunize the pension fund against changes in the interest rate and what are the benefits and drawbacks of this approach in practice? Explain your answer.

Determine the angle of internal friction for the soil : A cohesionless soil sample was subjected to a triaxial test. The sample failed when the minor principal stress (confining pressure) was 1200 lb/ft^2 and the deviator stress was 3000 lb/ft^2.

Determine the temperature rise in the plate : A copper plate, with dimensions of 3 cm x 3 cm x 5cm length, width, and thickness respectively, determine the temperature rise in the plate after 10 seconds

User Account

All Pages