Determine number of kilograms of chlorine needed per day

Assignment Help Civil Engineering
Reference no: EM13313705

Consider again the proposed water treatment plant for a city of 100,000 people where the maximum daily water usage rate is 99 X 106 L/d. Determine (a) the number of kilograms of chlorine needed per day and (b) the capacity of the contact tank. You may assume that the chlorine demand is 1.0 mg/L and that the desired chlorine residual is 0.2 mg/L. Furthermore, you may assume that the minimum contact time should be 30 minutes.

(The contact time in water treatment plants is usually provided by a large storage chamber called a clear well or storage reservoir. The primary function of the clear well is to isolate the plant from the hourly fluctuation of municipal water demand, but it also serves the purpose of allowing sufficient time so that the concentration of free available chlorine will stabilize at the proper value before being pumped to users.)

Reference no: EM13313705

Questions Cloud

Determine how far away are the cliffs : You are on a boat in a fog and know there are cliffs ahead of you somewhere, but you cannot see them. How far away are the cliffs
Explain what is the final temperature of substances : A 31.3g wafer of pure gold initially at 69.3^\circ C is submerged into 64.1g of water at 27.7^\circ C in an insulated container. What is the final temperature of both substances at thermal equilibrium
Determine the size and power requirements for rapid mix : A water treatment plant is processing water at s flow rate of 0.26m^3/s. The hydraulic detention times for the rapid mix tank, flocculation basin and the rectangular sedimentation basin are 10 sec, 30 min, 60 min, respectively.
Determine the wavelength of the resulting wave on the cable : A steel cable with a total length of 25.6 m and total mass of 95 kg is connected to two poles. Calculate the wavelength of the resulting wave on the cable
Determine number of kilograms of chlorine needed per day : Consider again the proposed water treatment plant for a city of 100,000 people where the maximum daily water usage rate is 99 X 106 L/d. Determine (a) the number of kilograms of chlorine needed per day and (b) the capacity of the contact tank.
Explain the energy of a photon of electromagnetic radiation : Calculate the energy of a photon of electromagnetic radiation at the following frequency 103.7 (typical frequency for FM radio broadcasting) in J.
Explain how to determine the max height of a brick wall : Assuming a density of 120/ft^3 for masonry brick work, determine the max height of a brick wall if the allowable compressive stress is limited to 150/in^2 and the brick is a) 4" wide b) 6" wide.
What is the minimum detention time in hours to settle out : The settling velocity of alum floc in a sedimentation basin is approximately 0.0014 fps. Calculate the equivalent overflow rate in gpd/ft2. What is the minimum detention time in hours to settle out the alum floc in an ideal basin with a depth of 1..
What is the angular momentum of the rod : A thin rod has a length of .25 m and rotates in a circle on a frictionless tabletop. The axis is perpendicular to the length of the rod at one of its ends. What is the angular momentum of the rod before the bug started crawling

Reviews

Write a Review

Civil Engineering Questions & Answers

  Compute the wavelength corresponding to the frequencies

Provided that the amplitude is sufficiently great, the human ear can respond to longitudinal waves over a range of frequencies from about 20 Hz to about 20000Hz. Compute the wavelength corresponding to these frequencies

  Geometric design and construction of a new two-lane road

Geometric design and construction of a new two-lane two-way road has been recently completed and now it is time for design pavement near Ballarat, Victoria.

  What is the probability of 2 or more such floods in 10 years

A hydrologic structure (e.g. a dam or a dike) is said to be designed for the N-year flood if it has a capacity which will be exceeded only by a flood equal oto or greater than N-year flood.

  What is the average degree of consolidation for clay layer

A normally consolidated clay layer is 4 m thick (one way drainage). From the application of a given pressure, the total anticipated primary consolidation settlement will be 80mm. What is the average degree of consolidation for the clay layer.

  Determine the total elongation of the steel rod

A steel rod having a cross sectional area of 1/2in^2 and length of 600ft is suspended vertically. It supports a load of 5000 pounds at the lower end. If steel weighs 490 lb/ft^3 and E=30,000,000 psi, find the total elongation of the rod

  What is the wavelength of the electromagnetic radiation

You heat 250 ml of tap water from 10 degree celcius to 100 degree celcius in 2 minutes using a microwave oven operating at 2.5 GHz. a). What is the wavelength of this electromagnetic radiation

  Determine the unit strain developed in the concrete

a concrete test cylinder is loaded with p= 100k (445 kn) and resulting shortening of 0.036" (0.0914 mm). determine the unit strain developed in the concrete.

  Determine horizontal distance between the points

What is the corresponding horizontal distance between the points - The slop distance 156.777 from one poin to another at rate of+1.5%

  Find the absolute-gage and vacuum pressure heads

A glass jar is heated in an oven and sealed when the air pressure is 103 kPa and the temperature is 105 C. Find the absolute, gage, and vacuum pressures in the jar when it cools to 20 C.

  Estimate the kg per day of solids that must be disposed of

The preliminary design for a wastewater treatment plant is being developed. The wastewater flow rate is 10,000 m3/day, and the BOD5 concentration is 200 mg/L. The plant discharge standard is 30 mg/L as BOD5.

  Find the density of air and weight of the air in the tank

An empty air tank has a volume of 0.024 m3. The compressor on the tank is run until the pressure gauge reads about 65 psi (or 22,500 Pa). Assuming the temperature of the tank is 25 C, find the density of the air and the weight of the air in the ta..

  Determine the elevation and stationing of the low point

A 1400-ft-long sag vertical curve (equal tangent)has a PVC at station 115 + 00 and elevation 750 ft. The initial grade is -3.5% and the final grade is +6.5%. Determine the elevation and stationing of the low point, PVI, and PVT

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd