Determine if the screen needs to be cleaned

Assignment Help Civil Engineering
Reference no: EM13539083

A manually cleaned bar screen has bars with a thickness of 8-mm (0.31-in) and openings 25-mm (0.98-in). After operating for a period of time, assume that the opening size decreases to 10-mm due to the accumulation of materials (debris) on the screens. If the approach velocity is 0.68 m/s (2.3 ft/s), determine if the screen needs to be cleaned. Why or why not?

Reference no: EM13539083

Questions Cloud

Calculate how much energy was dissipated by friction : A 16 kg girl slides down a playground slide that is 2.8 m high. When she reaches the bottom of the slide, her speed is 1.3 m/s. How much energy was dissipated by friction
How far does the platform float above the water surface : A floating platform is supported at each corner by a hollow sealed cylinder 1 m in diameter, the platform itself weighs 25kN in air and each cylinder weighs 1.2kN per meter of length.
What is the rolling resistance of the road : A four-wheel tractor whose operating weight is 47,877 lb is pulled up a road whose slope is +3.5% at a uniform speed. If the average tension in the towing cable is 4,860lb, what is the rolling resistance of the road?
How do you find where maximum gage pressure occurs : Knowing that the tension in cable AD is 405, determine (a) the angle between cable AD and the boom AB, (b) the projection on AB of the force exerted by cable AD at point A.
Determine if the screen needs to be cleaned : A manually cleaned bar screen has bars with a thickness of 8-mm (0.31-in) and openings 25-mm (0.98-in). After operating for a period of time, assume that the opening size decreases
Determine the force p needed to remove the pipe : The segments of pipe and couplings used for drilling an oil well 15,000 ft deep are made of A-36 steel weighing 20 lb/ft. They have an outside diameter of 5.50 in. and an inside diameter of 4.75 in
Determine the maximum axial force p that can be applied : If the design speed of a multi-lane highway is 60 mph, what is the minimum sight distance that should be provided on the road if (a) the road is horizontal and (b) the road has a maximum grade of 5 percent? Assume the perception-reaction time = 2.5 s..
Compute the stresses and deflections at the corner of the : Compute the stresses and deflections at the corner of the slab according to Westergaard and Ioannides. Compute the stresses and deflections at the edge and interior according to Westergaard.
Derive the vector equation for the acceleration : Derive the vector equation for the acceleration of a particle in normal and tangental compontens. Begin with the velocity vector v=vut where v=ds/dt show all work including any convesion unit vectors.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the pressure variation in the flow field

A plane flow field is developed by addition of a free vortex and a uniform stream in the positive x direction. If the vortex is located a distance a from the origin, find the pressure variation in the flow field.

  Determine the minimum required wire diameter assuming

A large steel tower is to be supported by a series of steel wires; it is estimated that the load on each wire will be 19,000N. Determine the minimum required wire diameter assuming a factor of safety 5 and that the yield strength of the steel is 900M..

  What is the probability of a water shortage in the city

during the next month, the amount of water available for a city is lognormally distributed with a mean of 1 million gallons and a c.o.v. of 40%, where as the total demand is expected to follow a lognormal distribution

  What length of contracted rectangular weir 10m high should

a trapezoidal canal 6m wide at the bottom and having a side slope of 1v2h carries water with a mean velocity of 1.0ms

  Determine the power required to run the compressor

Helium (Hrom an intie) at a rate of 1.5 lbm/s is compressed inan adibatic compressor from an intial condition of 70 F, 14.7 Psiato final condtion of 1070 F, 147 Psia. Determine The power required to run his compressor

  Compare maximum shear stress and angle of torsion

Compare the maximum shear stress and the angle of torsion for members of equal lengths and cross-sectional areas with square, rectangular and circular section. All members are subjected to the same torque

  A homogeneous coarse sand deposit has a water table at 10 m

1. a tensiometer is used to measure a compacted soil in the field that has a matric suction of 200 kpa under

  How can the water pressure in a pipe be measured simply

1.How can the water pressure in a pipe be measured simply 2.What force causes the water pressure to fall as it flows along a pipe 3.How do you think the pressure drop will change when each of the three variables changes

  Determine the cost c of the turbine for mass flow

Ethylene enters a turbine at 10 bar and 450 K, and exhausts at (atm) and 325 K. For mass flow in = 4.5 kg s^-1, determine the cost C of the turbine. State any assumptions you make. Data: H1 = 761.1 , H2 = 536.9 kg^-1, C/$ = (15,200)(1W1/kW)^0.573

  What is level of service before and after the development

A divided multilane highway in a recreational area (fp = 0.90) has four lanes (two lanes in each direction) and is on rolling terrain. The highway has 10-ft lanes with a 6-ft right-side shoulder and a 3-fl left-side shoulder.

  How far back from the front axle would the center of gravity

how far back from the front axle would the center of gravity have to be to ensure that the maximum tractive effort developed for front- and rear- wheel-drive options is equal (assume that all other variables are unchanged)

  Determine the overflow rate and solids loading of clarifier

An activated sludge aeration tank has a width of 14m, a length of 15m and an effective liquid depth of 4.5m. The secondary clarifier has a diameter of 25m. The plant operating parameters are as follows

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd