Compute the radius of the second curve

Assignment Help Civil Engineering
Reference no: EM13542247

Two converging tangents have azimuths of 300 deg and 270 deg respectively, while thAt of the common tangent is 320 deg. The distance from the point of intersection of the tangents to the PI of the second curve is 100m while the stationing of the PI of the first curve is 10+432.24.If the radius of the curveis 285.40 m,

a. Compute the radius of the second curve.

b. Compute the stationing of the PRC.

c. Compute the stationing of PT.

Reference no: EM13542247

Questions Cloud

The quality of the working fluid as it exists the 2 turbine : A 60 MW Rankine steam power cycle in Iceland uses reheat. The system is comprised of a single adiabatic pump, a boiler using geothermal energy, two adiabatic turbine stages and a condenser. Water as the working fluid, which enters the 1st turbine sta..
Recommend whether jane should receive a best : Recommend whether Jane should receive a best-shot, market-matching or lowball offer and why.
Compare and contrast the promotional strategies : Compare and contrast the promotional strategies used by two (2) different companies for a similar product within the category that you selected.
The divider is removed and the system eventually attains : The system is initially divided in two parts, with 1/3 of the mass at T1 and 2/3 of the mass at T2. The divider is removed and the system eventually attains equilibrium.
Compute the radius of the second curve : Two converging tangents have azimuths of 300 deg and 270 deg respectively, while thAt of the common tangent is 320 deg. The distance from the point of intersection of the tangents to the PI of the second curve is 100m while the stationing of the PI o..
The heated water outflow from a nuclear power plant : The heated water outflow from a nuclear power plant is cooled in a 50-m wide rectangular channel that has a discharge, Q = 225.0 m3/s. The Manning’s n is 0.015 and the bed slope is 5.0x10-4
A hydraulic jump occurs at the entrance of this channel : A hydraulic jump occurs at the entrance of this channel, with a downstream depth equal to the uniform flow depth. What is the upstream depth, y1, of the hydraulic jump?
What is the principal alloy in steel : A 2-ft diameter circular pipe has a Manning's n of 0.013 and a bed slope of 2.0 X 10^-3. What is the uniform flow rate in this pipe if it is completely full (Qf) in ft^3/s? What is the centerline uniform water depth (y0) in the channel if the flow, Q..
Categories and number as well as capacities : Categories and number as well as capacities

Reviews

Write a Review

Civil Engineering Questions & Answers

  Calculate the velocity in the constriction and the flowrate

Water flows through a 75 mm constriction in a horizontal 150 mm pipe. If the pressure in the 150 mm section is 345 kPa and that in the constriction 207 kPa, calculate the velocity in the constriction and the flowrate.

  Calculate the factor of safety and deformation

A 1 cm diameter, 0.4 m long steel rod is to be used in an application where it will be subjected to an axial tensile force of 15kN. The factor of safety based on yield stress must be at least 1.5, and the axial deformation must not exceed 2 cm.

  Determine the maximum acceleration from rest

A rear-wheel-drive car 2600 lb, has an 80-inch wheelbase, a center of gravity 20 inches above the road surface and 30 inches behind the front axle, a drivetrain efficiency of 85%, 14-inch-radius wheels,

  Which dose should be administered in order to anesthetize

Suppose that sodium pentobarbital is used to anesthetize a dog. the dog is anesthetized when its bloodstream contains at least 45 mg of sodium pentobarbitol per kilogram of the dog's body weight.

  What is the moment of the tension force acting at a

using the principles to developed in chapter 3 on equilibrium, one can determine that the tension in cable AB is 143.4 N. Determine the moment about the x-axis of this tension force acting on point A.

  Complete max demand calculation for fully ac hospital

Complete a maximum demand calculation for a fully air conditioned hospital with the following electrical equipment and outlets.  500, 28W lamps  200, 14W lamps 400, 10A socket outlets 5, 18A, 3 phase, air conditioning units

  How is nitrate related to tn and tkn

Show that the drinking water standard of 10 mg/L nitrate as nitrogen is equivalent to 45 mg/L nitrate. How is nitrate related to TN and TKN?

  Determine a composite scs runoff curve number

Determine a composite SCS runoff curve number for a 600-acre basin that is totally within soil group C. The land use is 40 percent contoured row crops in poor hydrologic condition and 60 percent native parture in fair hydrologic condition.

  Determine the x and y scalar components

The forces F1, F2, and F3, all of which act on point A of the bracket, arespecified in three different ways. Determine the x and y scalar components of each of the three forces.

  Determine how much area will be required for the landfill

If the landfill is to be constructed to a depth 4 cells, how much area will be required for the landfill if it is to serve the solid waste disposal needs for Tippecanoe County for the next 30 years

  How much time will it take for chemical to reach concention

Chemical ‘x' is regulated by EPA and the maximum allowable concentration in water is 10g/L. 1000 kg of chemical ‘x' is released in a lake (volume 1,000 m3) where it undergoes degradation as a first order reaction process

  Engine suspended from a spreader beam

The 3.5-Mg engine is suspended from a spreader beam having a negligible mass and is hoisted by a crane which exerts a force of 40 kN on the hoisting cable. Determine the distance the engine is hoisted in 2.4 s, starting from rest.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd