Compute the modulated wavelength under the humidity

Assignment Help Civil Engineering
Reference no: EM13297168

The average slope distance of 500m was measured with utilizing infrared light with wavelength = .91 um has a modulating frequency at 24.5 MHz. At the time of the measurement, the temperature was 27 degrees C and the atmospheric pressure was 755.1 mmHg. Compute the modulated wavelength under the given atmospheric conditions and of 50% humidity.

Reference no: EM13297168

Questions Cloud

Estimate the power required to accelerate a 1350 kg vehicle : The vehicle has a frontal cross -sectional area of 1.9 m^2. The roadway has a straight alignment and a badly patched and broken asphalt surface. assume a drag coefficient of 0.3 and p of air of 1.29 kg/m^3
What were our sales revenues : Because my company is financed with stock only, I was happy that we paid no interest expense. a. What were our sales revenues? b. What was the net cash flow?
Evaluate the ph during the titration of hypochlorous acid : Calculate the pH during the titration of 10.00 mL of 0.400 M hypochlorous acid with 0.500 M NaOH. First what is the initial pH (before any NaOH is added). The Ka for HOCl is 3.0 x 10-8 M. 2.What is the pH after 2.40 mL of NaOH are added
What is the acceleration of the two blocks : Block A has a mass of 2 kg and rests on a smooth table. What is the acceleration in m/s2 of the two blocks
Compute the modulated wavelength under the humidity : The average slope distance of 500m was measured with utilizing infrared light with wavelength = .91 um has a modulating frequency at 24.5 MHz. At the time of the measurement, the temperature was 27 degrees C and the atmospheric pressure was 755.1 ..
What trade should you make : What trade should you make? How much margin would you have to post to your account ? At what price would you receive a margin call?
Calculate the magnitudes of the forces on the ladder : To get up on the roof, a person (mass 70.0 kg) places a 6.00-m aluminum ladder (mass 10.0 kg) against the house on a concrete pad with the base of the ladder 2.00 m from the house. calculate the magnitudes of the forces on the ladder
How to calculate the entropy change for the system : Calculate the entropy change for the system and the surroundings. The heat of fusion of water is 6.02 kJ/mol; Cp (water)=4.184 J/K/g, Cp(ice)=2.094 J/K/g.
Calculate the elevations at the vpc-vpt and high point : A 2000-ft vertical curve connects a +3% grade to a -5% grade. If the vertical tangents intersect at sta. 52 + 60.55 and elevation 877.62 ft, calculate the elevations at the VPC, VPT, high point, and sta. 54 + 00.

Reviews

Write a Review

Civil Engineering Questions & Answers

  What force must be applied at each connection

A concentrated downward force of 2000 lb. is located 6' from the left support, and a uniformly distributed load of 200 lbs./lin. ft. begins 6' to the right end of the member. What force must be applied at each connection to maintain equilibrium?

  Determine ft and fn

for this purpose replace this force by its equivalent of two forces at At Ft parallel and Fn perpendicular to the beam. Determine Ft and Fn.

  Design a cantilever

Need to design a cantilever retaining wall 8m high, saturated unit weight is 16kn/m 3 , surcharge is 7kn/m 2 , load above wall supported on wall stem

  Determine the torsional moment in the hollow x-section

A concrete box girder bridge has the rectangular x-section. The box is prismatic and considered thin-walled. It span is L=48m and simply supported at points A,B,C and D. The supports are assume to be able to transfer tensile forces.

  Determine the magnitude of reaction

Determine the magnitude of reaction at point A (in kips) of a 20' beam with 5kips at 4' of the beam and 2kips at 9' of the beam at 350lbs./ft.

  What is the difference between factor of safety

what is the difference between factor of safety in rankine & coulomb in overturning, sliding and bearing capasity ?

  Find the value of the kinetic energy correction coefficient

assuming that the velocity variation within the main channel and the floodplain subsections is much smaller than the change in mean velocities between subsections, find the value of the kinetic energy correction coefficient.

  Determine what percentage of the time will the through lane

A traffic engineer is trying to design a left turn bay on an EB approach to an intersection. The signal timing for left turns will have 10 seconds of "left turn only" green time and 50 seconds of red time each signal cycle.

  Determine the total shortening of the pile

a) Determine the total shortening of the pile in terms of F, L, A, and E; b) If F=96 kips, L=40 ft., A=100in2, and E=1.5 x 106 psi, how much does such a pile shorten?

  Determine the tension in cables ac and ab

The casting has a mass of 3Mg. Suspended in a vertical position and initially at rest, it ia given an upward speed of 200mm/s in o.s^s using a crane hook H. Determine the tension in cables AC and AB during this time interval if acceleration is con..

  What is the average waiting time of vehicles in the queue

A freeway has a capacity of 4500 veh/hr. A traffic accident occurs at 9AM and the freeway is closed. At 9:15 AM, the freeway is partially opened with capacity of 1500 veh/hr. Freeway is restored to full capacity 4500 veh/hr at 9:30 am.

  Types of metamorphic foliations

Name three types of metamorphic foliations, and draw a small sketch that shows a situation. Where a metamorphic foliation could cause problems in an excavation.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd