Calculate the elevations at the vpc-vpt and high point

Assignment Help Civil Engineering
Reference no: EM13297164

A 2000-ft vertical curve connects a +3% grade to a -5% grade. If the vertical tangents intersect at sta. 52 + 60.55 and elevation 877.62 ft, calculate the elevations at the VPC, VPT, high point, and sta. 54 + 00.

Reference no: EM13297164

Questions Cloud

Compute the modulated wavelength under the humidity : The average slope distance of 500m was measured with utilizing infrared light with wavelength = .91 um has a modulating frequency at 24.5 MHz. At the time of the measurement, the temperature was 27 degrees C and the atmospheric pressure was 755.1 ..
What trade should you make : What trade should you make? How much margin would you have to post to your account ? At what price would you receive a margin call?
Calculate the magnitudes of the forces on the ladder : To get up on the roof, a person (mass 70.0 kg) places a 6.00-m aluminum ladder (mass 10.0 kg) against the house on a concrete pad with the base of the ladder 2.00 m from the house. calculate the magnitudes of the forces on the ladder
How to calculate the entropy change for the system : Calculate the entropy change for the system and the surroundings. The heat of fusion of water is 6.02 kJ/mol; Cp (water)=4.184 J/K/g, Cp(ice)=2.094 J/K/g.
Calculate the elevations at the vpc-vpt and high point : A 2000-ft vertical curve connects a +3% grade to a -5% grade. If the vertical tangents intersect at sta. 52 + 60.55 and elevation 877.62 ft, calculate the elevations at the VPC, VPT, high point, and sta. 54 + 00.
Explain the rate of the reverse reaction at equilibrium : Explain how the rate of the forward reaction compares to the rate of the reverse reaction at equilibrium
Compute the change in length of the rod : An aluminum rod is 17.0 cm long at 20°C and has a mass of 350 g. what is the change in length of the rod
Determine the required length of super elevation runoff : A simple highway curve is planned to connect two horizontal tangents that intersect at sta. 2500 + 00.00 at an external angle of 52 degrees. For a design speed of 60 mi/hr and a curve radius of about 1.25 times the minimum allowable
What would be the percentage appreciation on the stock : What would be the percentage appreciation on the stock bought by the venture investors versus the investment appreciation for the founders?

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the values of k and c

The landing gear of an airplane can be idealized as the spring-mass damper system. If the runway surface is described y(t)=y0 cos wt, determine the values of k and c that limit the amplitude of vibration of the airplane (x) to 0.1m. Assume m=2000k..

  Define the grade of the highway

The grade of the highway, Suppose that a highway rises a distance of 269 feet in a horizontal distance of 2647 feet.

  Determining a maximum safe speed

The central angle is 35 degrees, the superelevation is 0.08, and 20.6 ft is cleared (for sight distance) from the inside edge of the innermost lane. Determine a maximum safe speed (assuming current design standards) to the nearest 5 mi/h.

  Shear and bending moment expressions

Show or formulate the shear and bending moment expressions for each board, and plot/draw the shear and bending moment diagrams of the boards.

  Magnitude of acceleration-along a circular path

The boat is travelling along a circular path with a speed v=(0.0625t). Determine the magnitude of its acceleration when t=10s

  Sketch the cycle on p-v coordinates

A quality of water within a piston-cylinder assembly executes a Carnot power cycle. During isothermal expansion, the water is heated from saturated liquid at 50 bar until it is a saturated vapor. The vapor then expands adiabatically to a pressure ..

  What are the factors affecting the hydraulic conductivity

what are the factors affecting the hydraulic conductivity?

  Seepage velocity and estimating hydraulic gradient

The dye appears 14 days later in an observation well 75 ft away from the injection point. Compute the seepage velocity and estimate the hydraulic gradient in the aquifer if the porosity of the soil is 42%.

  Give criteria used to organize systematic mineral collection

For some minerals color is a diagnostic property making identification rather easy. However, certain minerals can also occur in a wide variety of colors making color a poor tool for identification. List different colors for the mineral quartz lo..

  Which option should to select to maximize the payout

You are the winner of a sweepstakes and given a choice of a one-time payment of $1,000,000 or a guaranteed $80,000 per year for 20 years. Assume that you will collect all 20 years regardless of health condition.

  Estimate the median and 90th percentile load

Estimate the median and 90th percentile load of SS contained in the runoff. Note: COV = coefficient of variance

  Determine the rate of flow-unconfined aquifer

In an unconfined aquifer having K = 30/m/day, two observation wells, 3km apart, have water levels of 50 and 40 m, respectively, above the base of the aquifer. Determine the rate of flow.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd