### Comment on the design theory of the dutch abc group

Assignment Help Civil Engineering
##### Reference no: EM131034742

Comment on the design theory of the Dutch ABC group.

The comment is approx three pages long and written in APA style with refrences.

### Write a Review

#### Calculate the stress along the edge a-b caused

A horizontal prestressing force of 500kN is applied to a rectangular beam. The beam has a depth of 450mm and a width of 250mm. The force is applied at a distance of 60mm below the sections x-x axis.

#### Determine a distance between cross-sections

Route a trianglular hydrograph through a 100 foot wide rectangular channel with a bed slope of 0.015 and a Mannings n of 0.035. Tak a distance between cross-sections of 3000 ft.

#### Determine what is the pressure acting on the sand

A 3-ft diameter column with weight of 150 kg is placed on top of 1 m thick aggregate layer. The soil beneath the aggregate layer is sand. The friction angle of the aggregate is 36 degrees and the unit weight is 22 lb/ft3. What is the pressure acti..

#### Compute the new thickness of sand over extra strata

A 1.20-m thick strata of sand has a void ratio of 1.81. A contractor passes a vibratory roller over this extra strata, which densifies it and reduces its void ratio to 1.23. Compute its new thickness.

#### Find what is the probability of overcrowding at the airport

The selection of the runway for a given day is based on wind at the beginning of the day, and once selected will not be changed for the entire day. The airport has a single peak period each day; this is the hour between 4:00 and 5:00pm.

#### How to plot the shear and moment across the beam

Write the equations required to express the shear and moment along the entire length of beam. Use an origin at point A, and then repeat computations using an origin at point D. Plot the shear and moment across the beam.

#### Derive the 3-h snyder unit hydrograph for a 100-square km

Derive the 3-h Snyder unit hydrograph for a 100-km^2 watershed where the main stream is 15 km long and the distance from the watershed outlet to the point on the stream nearest to the centroid of the watershed is 7 km.

#### Required height of the roller coaster

Determine the required height h of the roller coaster so that when it is essentially at rest at the crest of the hill it will reach a speed v= 100km/hr when it comes to the bottom.

#### What total cylinder length l is required for the platform

The platform itself weights 30 kN in air, and each cylinder weighs 1.0 kN per meter of length. What total cylinder length L is required for the platform to float 1 m above the water surface

#### What is the optimal life of the forklift

A 2000-pound, counterbalanced, propane forklift can be purchased for \$30,000. Due to the intended service use, the forklift's market value drops 20% of its prior year's value in Years 1 and 2 and then declines by 15% until Year 10

#### Determine which of the following statements is true

The velocity and pressure are given at two points in the flow field. Assume that the two points lie in a horizontal plane and that the fluid density is uniform in the flow field and is equal to 1000 kg/m^3. assume steady flow. Then, given these data,..

#### What is the pressure difference measured by the manometer

The "U"-tube manometer containing mercury of density 13600 kg/cubic meters is used to measure the pressure drop along a horizontal pipe.