User Account

All Pages

Choice of design pressure and temperature

Assignment Help Chemical Engineering
Reference no: EM13884207

The thermal design of a heat exchanger to recover heat from a kerosene stream by transfer to a crude oil stream was carried out in. Make a preliminary mechanical design for this exchanger. Base your design on the specification obtained from the CAD design procedure used in the example. All material of construction is to be carbon steel (semi-killed or silicon killed). Your design should cover:

a. Choice of design pressure and temperature

b. Choice of the required corrosion allowances

c. Choice of the type of end covers

d. Determination of the minimum wall thickness for the shell, headers, and ends

e. A check on the pressure rating of the tubes

Reference no: EM13884207

Questions Cloud

Cottage roof timber from ireland : Cottage roof timber from Ireland
List the types of separator : List the types of separator that could be considered for. Bearing in mind the nature of the process, what type of separator would you recommend for this duty?separating the solids from the liquid
Determine bmi a correlation with asthma incredibly difficult : Determining whether BMI has a correlation with asthma is incredibly difficult. For example, it may be difficult to establish whether individuals in the control group are unexposed, or if in some cases, they may fail to recall past exposure.
Review reports for a private company under ssars : 1.What are the differences between the review reports for a private company under SSARS and for the interim financial statements of a public company?
Choice of design pressure and temperature : The thermal design of a heat exchanger to recover heat from a kerosene stream by transfer to a crude oil stream was carried out in. Make a preliminary mechanical design for this exchanger. Base your design on the specification obtained from the CA..
Information contained in new dominion''s corporate : 1.You have been asked to provide assurance on information contained in New Dominion's Corporate Sustainability Report.
Draw a circuit of an nmos inverter and explain its operation : Draw a circuit of an NMOS inverter and explain its operation. Briefly mention its advantage over the TTL inverter
Accounting standards generally accepted by the securities : Jennifer Branson is a new staff auditor on the audit engagement of Greenville Light & Sound, which is a publicly traded company with a calendar year end.
Selective oxidation of propylene : Carolina (H2C=CHCHO) is made by selective oxidation of propylene at 2 bar, 350 °C using a molybdenum, iron, and bismuth catalyst on a silica support

Reviews

Write a Review

Chemical Engineering Questions & Answers

  Mining and metallurgy - assignment metallurgy

Extract ore descriptors or features from the variables and design a model that can classify the ores correctly from images of the ore

  Question 1nbspheat capacities cv and cp are defined as

question 1nbspheat capacities cv and cp are defined as temperature derivatives respectively of u and h. show that the

  Temperature profile for each of the blocks

Two separate metal blocks of thickness d and 2d are kept at constant temperature T0 at the top anda constant heat flux q0 is provided at the bottom. Draw the steady state temperature profile for eachof the blocks.

  Microstructural products of eutectoid iron-carbon

Name the microstructural products of eutectoid iron-carbon alloy (0.76 wt% C) specimens that are first completely transformed to austenite, then cooled to room temperature at the following rates:

  Estimate of the cost of steam per ton

Make a rough estimate of the cost of steam per ton, produced from a packaged boiler. 10,000 kg per hour of steam are required at 15 bar. Natural gas will be used as the fuel, calorific value 39 MJ/m3 (roughly 1 MMBtu/1000 scf). Take the boiler eff..

  Define continuous stirred tank reactor

Continuous Stirred Tank Reactor (CSTR) : Flow rate and Reactor Volume, The liquid phase reactions

  Calculate the time for the center to reach

A flat slab of Douglas fir wood 50.8 mm thick containing 30 wt% moisture is being dried from both sides (neglecting edges and ends). The equilibrium moisture content at the surface of the wood due to the drying air blown over it is held at 5 wt% mois..

  Write down balanced chemical equation for polymerization

Write down a balanced chemical equation for the polymerization and Name the polymer formed by this polymerization.

  Combustion of sulfur

Sulfur dioxide produced by the combustion of sulfur in air is absorbed in water. Pure SO2 is then recovered from the solution by steam stripping. Make a preliminary design for the absorption column.

  Explain lowest standard deviation of measurements

Lowest standard deviation of measurements, As the Quality Control Manager of a chemical company, you are asked to decide between several process methods that are supposed to uniformly mix 37.4 milligrams into a chemical solution.

  What you expect to happen as t and w increase or decrease

A completely enclosed stirred-tank heating process is used to beat an incoming stream whose flow rate varies. The heating rate from this coil and the volume are both constant.(a) Develop a mathematical model (differential and algebraic equations) tha..

  Design a heat exchanger for the duty

Design a Heat Exchanger for the Following Duty: Reduced crude oil leaving a distillation unit with a flow rate of 3166.04 kL/d at 268 oC and is to be cooled to 243 oC by exchange with 62.8 kg/s pre-flashed crude oil coming from pre-flash unit at 206 ..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

Submit Assignment

Academics

Major Subjects

Majors

Get In Touch

whatsapp: +1-415-670-9521

Phone: +1-415-670-9521

Email: [email protected]

TERMS & POLICIES

HELP & SUPPORT

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd