Calculate what is the standard error of the observations

Assignment Help Civil Engineering
Reference no: EM13313438

You measure an angle with a theodolite several times and record the following observations:
114° 27' 49"
114° 27' 37"
114° 27' 39"
114° 27' 41"
114° 27' 43"
114° 27' 44"

What is your best estimate of the true value of the angle?

What is the standard error of the observations?

Reference no: EM13313438

Questions Cloud

Determine what is the void ratio of the soil : In its natural state, a moist soil has a volume of 0.33 ft3 and weighs 42.55 lb. The oven-dried weigth of the soil is 35.56 lb. If Gs = 2.63, what is the void ratio of the soil
Find the banking angle : A velodrome track is banked so that a bicycle traveling at 62.8 km/h will have no tendency to slip to either side when traveling on the path that has a radius of curvature of 79.0 m
Find the downstream depth and the head loss in the jump : a hydraulic jump is to be formed in a trapezoidal channel with a base width of 20ft and a side slope of 2:1. The upstream depth is 1.25ft and Q=1000 cfs. Find the downstream depth and the head loss in the jump.
What is the radius of the wheel : During 0.15 s, a wheel rotates through an angle of 2.74 rad as a point on the periphery of the wheel moves with a constant speed of 2.16 m/s
Calculate what is the standard error of the observations : You measure an angle with a theodolite several times and record the following observations. What is your best estimate of the true value of the angle What is the standard error of the observations
What is your average speed for the entire trip : You drive on Interstate 10 from San Antonio to Houston, half the time at 63 km/h and the other half at 86 km/h. What is your average speed for the entire trip
Create effective teams using innovation : Create effective teams using innovation.
Explain what compound was condensed in an adol reaction : what compound was condensed in an adol reaction to produce (2E)-5-methyl-2-(1-methylbutyl)oct-2-enal
What is the single most important new technology : What is the single most important new technology that has affected digital forensics in the last five years and why?

Reviews

Write a Review

Civil Engineering Questions & Answers

  Concept of strengthening mechanisms

Describe in your own words the three strengthening mechanisms i.e., grain size reduction, solid solution strengthening, and strain hardening. Be sure to explain how dislocations are involved in each of the strengthening techniques.

  What are rotational velocity in rpm and linear velocities

One form of which consists of three equal weights joined by equal length ropes. The gaucho holds on to one weight spinning the bolas overhead. When the bolas is cast the weights cause the configuration to change

  Use strain energy to calculate deflection of bar at point e

A rigid horiztonal bar is suspended from two springs and is subjected to a vertical force of F0 = 158.8 kips. Each spring has a stiffness k = 14.7 kips/inch. If L1 = 11 inches and L2 = 11 inches, use strain energy to calculate the deflection of th..

  How much will each leg shorten under the applied

given that E for the tube material is 70 GN/m2 and the stool legs are 75cm long, how much will each leg shorten under the applied compressive load (take g = 9.8m/s2)

  Calculate pressure in point 1 nd density of manometric fluid

A U manometer reads 20 cm air as operating fluid and a given manometric fluid. A single branch closed tube reads 35 cm connected to point 1. If P2 = 1.2 ATM calculate the pressure in point 1 and the density of the manometric fluid.

  Determine what is the uniform deterministic arrival rate

ferryboat queuing lane holds 40 vehicles. If vehicles are processed (tolls collected) at a uniform deterministic rate of 5 vehicles per minute and processing begins when the lane reaches capacity

  Find summer values for oxygen demand and oxygen tranfer

A fine-bubble aeration basin has a flow of 21.5 mgd, an influent BOD of 180 mg/l, 31 mg/l of mmonia, and effluent of 10 mg/l. During the winter, the wastewater temperature of 14.8 degrees C does not nitrify.

  How to draw the expected water table profile along the line

Compute the water table profile drawn in part B. Provide a detailed description of your methodology, and limit your solution to include only 4 image wells. Plot the profile, and provide drawdown amounts at X = -400 m, -200 m, -100 m, 100 m, 200 m,..

  What is its specific gravity at 30 percent moisture content

The cross sectional dimensions of a 4-ft-long wood member at 30% moisture content is 1.5 in. x 7.5 in., and its weight is 11 lb. At oven-dry condition, its dimensions and weight are 1.35 in x 6.8 in., and 10.2, respectively. What is its specific g..

  What is the volume and base diameter of the resulting pile

Soil falls from a conveyor belt into a cone shaped pile at a rate of 1000lb/min. The bulk density of the soil is 110lb/ft^3. The height of the pile is equal to the base diameter.

  What should be the new volume of the lake

Suppose that the distance from the lake outlet to the withdrawal cannot be more than 20 mi. What should be the new volume of the lake?

  Determining maximum acceleration and maximum velocity

The posItIon of a particle along a straight line is given by s = (t 3 - 9t 2 + 1St) ft, where t is in seconds. Determine its maximum acceleration and maximum velocity during the time interval 0 :5: t :5: 10 s.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd